참고문헌
- ASCE Standard ASCE/SEI 41-06 (2007), Seismic Rehabilitation of Existing Building, USA: American Society of Civil Engineers.
- Asteris, P. G. (2003), "Lateral stiffness of brick masonry infilled plane frames", J. Struct. Eng., 129(8), 1071-1079. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1071).
- Asteris, P. G., Antoniou, S. T., Sophianopoulos, D. S. and Chrysostomou, C.Z. (2011), "Mathematical Macromodelling of Infilled Frames: State of the Art", J. Struct. Eng.; American Soc. Civil Eng. (ASCE), 137(12), 1508-1517. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000384.
- Asteris, P.G., Giannopoulos, I.P. and Chrysostomou, C.Z. (2012), "Modeling of infilled frames with openings", The Open Construct. Build. Technol. J., 6(1), 81-91. Doi: 10.2174/1874836801206010081.
- Asteris, P.G., Repapis, C.C., Cavaleri, L., Sarhosis, V. and Athanasopoulou, A. (2015a), "On the fundamental period of infilled RC frame buildings", Struct. Eng. Mech., 54(6), 1175-1200. http://dx.doi.org/10.12989/sem.2015.54.6.1175.
- Asteris, P.G., Repapis, C.C., Tsaris, A.K., Di Trapani, F. and Cavaleri, L. (2015b), "Parameters affecting the fundamental period of infilled RC frame structures", Earthq. Struct., 9(5), 999-1028. http://dx.doi.org/10.12989/eas.2015.9.5.999.
- Asteris, P. G., Tsaris, A. K., Cavaleri, L., Repapis, C., Papalou, A., Di Trapani, F. and Karypidis, D.F. (2016), "Prediction of the Fundamental Period of Infilled RC Frame Structures Using Artificial Neural Networks", Comput. Intelligence Neurosci., 2016(20). http://dx.doi.org/10.1155/2016/5104907.
- Asteris, P.G., Repapis, C.C., Foskolos, F., Fotos, A. and Tsaris, A.K. (2017a). "Fundamental period of infilled RC frame structures with vertical irregularity", Struct. Eng. Mech., 61(5), 663-674. https://doi.org/10.12989/sem.2017.61.5.663.
- Asteris, P.G., Repapis, C.C., Repapi, E.V. and Cavaleri, L. (2017b). "Fundamental period of infilled reinforced concrete frame structures", Struct. Infrastructure Eng., 13(7), 929-941. https://doi.org/10.1080/15732479.2016.1227341.
- Behnam, Behrouz, and Fahimeh Shojaei. (2018) "A Risk Index for Mitigating Earthquake Damage in Urban Structures." Integrating Disaster Sci. Management, 2018. 3-25. https://doi.org/10.1016/B978-0-12-812056-9.00001-4.
- Benavent-Climent, A., Ramirez-Marquez, A. and Pujol, S. (2018), "Seismic strengthening of low-rise reinforced concrete frame structures with masonry infill walls: shaking-table test", Eng. Struct., 165, 142-151. https://doi.org/10.1016/j.engstruct.2018.03.026.
- Cavaleri, L., Di Trapani, F., Asteris, P. G. and Sarhosis, V. (2017), "Influence of column shear failure on pushover based assessment of masonry infilled reinforced concrete framed structures: A case study", Soil Dynamics Earthq. Eng., 100, 98-112. https://doi.org/10.1016/j.soildyn.2017.05.032.
- Celarec, D., Ricci, P. and Dolsek, M. (2012), "The sensitivity of seismic response parameters to the uncertain modelling variables of masonry-infilled reinforced concrete frames", Eng. Struct., 35, 165-177. https://doi.org/10.1016/j.engstruct.2011.11.007.
- Chrysostomou, C.Z. and Asteris, P.G. (2012), "On the in-plane properties and capacities of infilled frames", Eng. Struct., 41, 385-402. https://doi.org/10.1016/j.engstruct.2012.03.057.
- CSI, SAP 2000 v-8 (2002), Integrated Finite Element Analysis and Design of Structures Basic Analysis Reference Manual, Berkeley, California, USA.
- Dilmac, H., Ulutas, H., Tekeli, H. and Demir, F. (2018), "The investigation of seismic performance of existing RC buildings with and without infill walls", Comput. Concrete, 22(5), 439-447. https://doi.org/10.12989/cac.2018.22.5.439.
- FEMA-306 (1999), Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, prepared by the Applied Technology Council (ATC-43 project) for the Partnership for Response and Recovery. Federal Emergency Management Agency, Washington, D.C.
- Fardis, M.N. (1996), Experimental and Numerical Investigations on the Seismic Response of the RC Infilled Frames and Recommendations for Code Provisions. ECOEST/PREC 8, Rep. No. 6. LNEC. Lisbon.
- Fardis, M. N. (2006), "Seismic Design Issues for Masonry-Infilled RC Frames", Proceeding of the First European Conference on Earthquake Engineering and Seismology (a joint event of the 13th ECEE and the 30th General Assembly of the ESC), Geneva, Switzerland.
- FEMA-273 (1997), NEHRP Guidelines for the Seismic Rehabilitation of Buildings. Washington (DC).
- FEMA-356 (2000), Prestandard and Commentary for Seismic Rehabilitation of Buildings, Federal Emergency Management Agency; Washington (DC), USA.
- Furtado, A., Rodrigues, H., Arede, A. and Varum, H. (2016), "Experimental evaluation of out-of-plane capacity of masonry infill walls", Eng. Struct., 111, 48-63. https://doi.org/10.1016/j.engstruct.2015.12.013
- Holmes, M. (1961), "Steel frames with brickwork and concrete infilling", Proceedings of the Institution of civil Engineers, 19(4), 473-478. https://doi.org/10.1680/iicep.1961.11305.
- Jinya, M. H. and Patel, V. R. (2014), "Analysis of RC frame with and without masonry infill wall with different stiffness with outer central opening", J. Res. Eng. Technol., 3(6), 76-83. https://doi.org/10.15623/ijret.2014.0306014.
- Kakaletsis, D.J., Karayannis, C.G. and Panagopoulos, G.K. (2011), "Effectiveness of rectangular spiral shear reinforcement on infilled R/C frames under cyclic loading", J. Earthq. Eng., 15(8), 1178-1193. https://doi.org/10.1080/13632469.2011.560361.
- Khoshnoud, H. R. and Marsono, K. (2016), "Experimental study of masonry infill reinforced concrete frames with and without corner openings", Struct. Eng. Mech., 57(4), 641-656. https://doi.org/10.12989/sem.2016.57.4.641.
- Kostinakis, K., and Athanatopoulou, A. (2019), "Effects of in-plan irregularities caused by masonry infills on the seismic behavior of R/C buildings", Soil Dynam. Earthq. Eng., https://doi.org/10.1016/j.soildyn.2019.03.012.
- Mander, J. B., Priestley, M. J. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
- Merter, O., Ucar, T. and Duzgun, M. (2017), "Determination of earthquake safety of RC frame structures using an energy-based approach", Comput. Concrete, 19(6), 689-699. https://doi.org/10.12989/cac.2017.19.6.689.
- Muho, E. V., Qian, J. and Beskos, D. E. (2019), "Modal behavior factors for the performance-based seismic design of R/C wall-frame dual systems and infilled-MRFs", Soil Dynam. Earthq. Eng., https://doi.org/10.1016/j.soildyn.2019.02.016.
- Ozmen, H. B., Inel, M., Senel, S. M. and Kayhan, A. H. (2015), "Load carrying system characteristics of existing Turkish RC building stock", J. Civil Eng., 13(1A), 76-91. https://doi.org/10.1007/s40999-018-0285-0.
- Ozmen, H. B. and Inel, M. (2017), "Effect of rapid screening parameters on seismic performance of RC buildings", Struct. Eng. Mech., 62(4), 391-399. https://doi.org/10.12989/sem.2017.62.4.391.
- Panagiotakos, T. B. and Fardis, M. N. (1996), "Seismic response of infilled RC frames structures", 11th World Conference on Earthquake Engineering, Acapulco, Mexico, June.
- Pasca, M., Liberatore, L. and Masiani, R. (2017). "Reliability of analytical models for the prediction of out-of-plane capacity of masonry infills", Struct. Eng. Mech., 64(6), 765-781. https://doi.org/10.12989/sem.2017.64.6.765.
- Peng, C. and Guner, S. (2018), "Direct displacement-based seismic assessment of concrete frames", Comput. Concrete, 21(4):355- 365. https://doi.org/10.12989/cac.2018.21.4.355.
- Penna, A., Morandi, P., Rota, M., Manzini, C. F., Da Porto, F. and Magenes, G. (2014), "Performance of masonry buildings during the Emilia 2012 earthquake", Bulletin Earthq. Eng., 12(5), 2255-2273. https://doi.org/10.1007/s10518-013-9496-6.
- Perera, R. (2005), "Performance evaluation of masonry-infilled RC frames under cyclic loading based on damage mechanics", Eng. Struct., 27(8), 1278-1288. https://doi.org/10.1016/j.engstruct.2005.03.012
- Polyakov, S. V. (1960), "On the interaction between masonry filler walls and enclosing frame when loaded in the plane of the wall", Translations in Earthquake Engineering, Earthquake engineering Research Institute, Oakland, California.
- Ricci, P., Di Domenico, M. and Verderame, G. M. (2018), "Experimental assessment of the in-plane/out-of-plane interaction in unreinforced masonry infill walls", Eng. Struct., 173, 960-978. https://doi.org/10.1016/j.engstruct.2018.07.033
- Samoil'a, D. M. (2012), "Analytical modelling of masonry infills", Acta Technica Napocensis: Civil Eng. Architect.; 55(2), 1-10. http://constructii.utcluj.ro/ActaCivilEng
- Saneinejad, A. and Hobbs, B. (1995), "Inelastic design of infilled frames", J. Struct. Eng., 121(4), 634-650. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(634)
- Sattar, S. and Liel, A. B. (2016), "Seismic performance of nonductile reinforced concrete frames with masonry infill walls-I: development of a strut model enhanced by finite element models", Earthq. Spectra, 32(2), 795-818. https://doi.org/10.1193/90914EQS139M
- Shariq, M., Abbas, H., Irtaza, H. and Qamaruddin, M. (2008), "Influence of openings on seismic performance of masonry building walls", Building Environ., 43(7), 1232-1240. https://doi.org/10.1016/j.buildenv.2007.03.005
- Smith, B. S. (1967), "Methods for predicting the lateral stiffness and strength of multi-storey infilled frames", Building Science, 2(3), 247-257. https://doi.org/10.1016/0007-3628(67)90027-8
- Tekeli, H., Dilmac, H., Demir, F., Gencoglu, M. and Guler, K. (2017), "Shear stress indicator to predict seismic performance of residential RC buildings", Comput. Concrete, 19(3), 283-291. https://doi.org/10.12989/cac.2017.19.3.283
- Turkish Eartquake Code (TEC), (2007), Specification for Structures to be Built in Disaster Areas, Ministry of Public Works ant Resettlement, Ankara, Turkey. https://www.resmigazete.gov.tr/eskiler/2007/03/20070306-3-1.pdf
- Uva, G., Raffaele, D., Porco, F. and Fiore, A. (2012), "On the role of equivalent strut models in the seismic assessment of infilled RC buildings", Eng. Struct., 42, 83-94. https://doi.org/10.1016/j.engstruct.2012.04.005