Wind and Structures

  • 제31권1호
  • /
  • Pages.59-73
  • /
  • 2020
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Wind fragility analysis of RC chimney with temperature effects by dual response surface method

  • Datta, Gaurav (Department of Civil Engineering, Indian Institute of Engineering Science and Technology (IIEST)) ;
  • Sahoo, Avinandan (Department of Civil Engineering, Indian Institute of Engineering Science and Technology (IIEST)) ;
  • Bhattacharjya, Soumya (Department of Civil Engineering, Indian Institute of Engineering Science and Technology (IIEST))
  • 투고 : 2019.10.31
  • 심사 : 2020.06.11
  • 발행 : 2020.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

Wind fragility analysis (WFA) of concrete chimney is often executed disregarding temperature effects. But combined wind and temperature effect is the most critical limit state to define the safety of a chimney. Hence, in this study, WFA of a 70 m tall RC chimney for combined wind and temperature effects is explored. The wind force time-history is generated by spectral representation method. The safety of chimney is assessed considering limit states of stress failure in concrete and steel. A moving-least-squares method based dual response surface method (DRSM) procedure is proposed in WFA to alleviate huge computational time requirement by the conventional direct Monte Carlo simulation (MCS) approach. The DRSM captures the record-to-record variation of wind force time-histories and uncertainty in system parameters. The proposed DRSM approach yields fragility curves which are in close conformity with the most accurate direct MCS approach within substantially less computational time. In this regard, the error by the single-level RSM and least-squares method based DRSM can be easily noted. The WFA results indicate that over temperature difference of 150℃, the temperature stress is so pronounced that the probability of failure is very high even at 30 m/s wind speed. However, below 100℃, wind governs the design.

키워드

과제정보

The financial support received from the Council of Scientific and Industrial Research (CSIR), Govt. of India (Scheme No. 22(0779)/18/EMR-II dated 02/05/2018) in connection with this work is gratefully acknowledged.

참고문헌

  1. Abrous, A., Wamkeue, R. and Berkouk, M.E. (2015), "Modeling and simulation of a wind model using a spectral representation method", The Proceedings of the 3rd International Renewable and Sustainable Energy Conference, Marrakech, Morocco, December.
  2. Acar, E. and Rais-Rohani, M. (2009), "Ensemble of metamodels with optimized weight factors", Struct Multidisc Optim, 37(3), 279-294. https://doi.org/10.1007/s00158-008-0230-y.
  3. Ambrosini, R.D., Riera, J.D. and Danesi, R.F. (2002), "Analysis of structures subjected to random wind loading by simulation in the frequency domain", Probabilist Eng Mech, 17(3), 233-239. https://doi.org/10.1016/S0266-8920(02)00008-5.
  4. Barnston, A.G. (1992), "Correspondence among the Correlation, RMSE, and Heidke Forecast Verification Measures; Refinement of the Heidke Score", Weather Forecast, 7(4), 699-709. https://doi.org/10.1175/15200434(1992)007<0699:CATCRA>2.0.CO;2.
  5. Benowitz, B.A. and Deodatis, G. (2015), "Simulation of wind velocities on long span structures: A novel stochastic wave based model", J Wind Eng Ind Aerodyn, 147, 154-163. https://doi.org/10.1016/j.jweia.2015.10.004.
  6. Bhandari, A., Datta, G. and Bhattacharjya, S. (2018), "Efficient wind fragility analysis of RC high rise building through metamodeling", Wind Struct, 27(3), 199-211. https://doi.org/10.12989/was.2018.27.3.199.
  7. Bhattacharjya, S. and Chakraborty, S. (2018), "An improved robust multi-objective optimization of structure with random parameters", Adv Struct Eng, 21(11), 1597-1607. https://doi.org/10.1177/1369433217752626.
  8. Bhattacharjya, S., Sarkar, M., Datta, G. and Ghosh, S.K. (2019), "Efficient Robust Design Optimization of a Stacker-Reclaimer Structure Under Uncertainty", Intl. J. Reliab., Quality Safety Eng., 26(2), 1950009. https://doi.org/10.1142/S0218539319500098.
  9. Bhavikatti, S.S. (2014), "Advanced RCC Design", New Age Publications, New Delhi, India.
  10. Bru, D., Ivorra, S. and Baeza, F.J. (2017), "Seismic behavior of a masonry chimney retrofitted with composite materials: a preliminary approach", Int J of Safety Security Eng, 7(4), 486-497. https://doi.org/10.2495/SAFE-V7-N4-486-497.
  11. Chakraborty, S. and Chowdhury, R. (2017), "Hybrid Framework for the Estimation of Rare Failure Event Probability", J Eng Mech, 143(5), 04017010. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001223.
  12. Chen, J. and Zhang, X. (2009), "An empirical joint probability density function of wind speed and direction", Proceedings of The Seventh Asia-Pacific Conference on Wind Engineering, Taipei, Taiwan, November.
  13. Chen, J., Chen, Y., Peng, Y., Zhu, S., Beer, M. and Comerford, L. (2019), "Stochastic harmonic function based wind field simulation and wind-induced reliability of super high-rise buildings", Mech. Syst. Sig. Pr., 133, 106264. https://doi.org/10.1016/j.ymssp.2019.106264.
  14. Chen, J., Zeng, X. and Peng, Y. (2017), "Probabilistic analysis of wind-induced vibration mitigation of structures by fluid viscous dampers" J Sound Vib, 409, 287-305. https://doi.org/10.1016/j.jsv.2017.07.051.
  15. Chen, L. and Letchford, C.W. (2004), "A deterministic-stochastic hybrid model of downbursts and its impact on a cantilevered structure", Eng Struct, 26(5), 619-629. https://doi.org/10.1016/j.engstruct.2003.12.009.
  16. Chen, X. and Kareem, A. (2004), "Equivalent static wind loads on buildings: new Model" J Struct Eng, 130(10), 1425-1435. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:10(1425).
  17. Cui, W. and Caracoglia, L. (2018), "A unified framework for performance-based wind engineering of tall buildings in hurricane-prone regions based on lifetime intervention-cost estimation", Struct. Saf, 73, 75-86. https://doi.org/10.1016/j.strusafe.2018.02.003.
  18. Denny, M. (2001), "Introduction to importance sampling in rareevent simulations", Eur J Phys, 22(4), 403-11. https://doi.org/10.1088/0143-0807/22/4/315.
  19. Deodatis, G. and Micaletti, R.C. (2001), "Simulation of highly skewed non-Gaussian stochastic processes" J. Eng. Mech., 127(12), 1284-1295. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:12(1284).
  20. Di Paola, M. (1998), "Digital simulation of wind field velocity" J Wind Eng. Indus. Aerod., 74-76, 91-109. https://doi.org/10.1016/S0167-6105(98)00008-7.
  21. EN 1992-1-2, Eurocode 2 (2004), Design of Concrete Structures. Part 1.2: General Rules-Structural Fire Design, Commission of the European Communities, Brussels, Belgium.
  22. Feng, R., Wang, X., Yuan, W. and Yu, J. (2018), "Impact of seismic excitation direction on the fragility analysis of horizontally curved concrete bridges", B. Earthq. Eng, 16(10), 4705-4733. https://doi.org/10.1007/s10518-018-0400-2.
  23. Ghosh, S., Ghosh, S. and Chakraborty, S. (2017b), "Seismic fragility analysis in the probabilistic performance-based earthquake engineering framework: an overview", Intl. J. Adv. Eng. Sci. Appl. Math., https://doi.org/10.1007/s12572-017-0200-y.
  24. Ghosh, S., Ghosh, S. and Chakraborty, S. (2018), "Seismic reliability analysis of reinforced concrete bridge pier using efficient response surface method-based simulation", Adv. Struct. Eng., 21(15), 2326-2339. https://doi.org/10.1177/1369433218773422.
  25. Ghosh, S., Mitra, S., Ghosh, S. and Chakraborty, S. (2017a), Seismic Reliability Analysis in the Framework of Metamodelling Based Monte Carlo Simulation, Modeling and Simulation Techniques in Structural Engineering, eds. Pijush Samui, Subrata Chakraborty and Dookie Kim, 192-208, accessed July 15, 2019.
  26. Giaccu, G.F. and Caracoglia, L. (2018), "Wind-load fragility analysis of monopole towers by layered stochastic approximation-Monte-Carlo method", Eng. Struct., 174, 462-477. https://doi.org/10.1016/j.engstruct.2018.07.081.
  27. Goswami, S., Ghosh, S. and Chakraborty, S. (2016), "Reliability analysis of structures by iterative improved response surface method", Struct. Saf., 60, 56-66. https://doi.org/10.1016/j.strusafe.2016.02.002.
  28. Gunn, S. (1998), "Support vector machines for classification and regression" Rep. No. ISIS-1-98; Department of Electronics and Computer Science, Univ. of Southampton, Southampton, U.K.
  29. Gur, S. and Ray-Chaudhuri, S. (2014), "Vulnerability assessment of container cranes under stochastic wind loading", Struct. Infrastruct. E., 10(12), 1511-1530. https://doi.org/10.1080/15732479.2013.834943.
  30. Harris, R.I. (1990), "Some further thoughts on the spectrum of gustiness in strong winds", J. Wind Eng. Indus. Aerod., 33(3), 461-477. https://doi.org/10.1016/0167-6105(90)90001-S.
  31. Hognestad, E. (1951), A Study of Combined Bending and Axial Load in Reinforced Concrete Members, University of Illinois at Urbana Champaign, College of Engineering, Engineering Experiment Station, Bulletin Series No. 399.
  32. Hu, P., Han, Y., Cai, C.S., Cheng, W. and Lin, W. (2019), "New analytical models for power spectral density and coherence function of wind turbulence relative to a moving vehicle under crosswinds", J. Wind Eng. Indus. Aerod., 188, 384-396. https://doi.org/10.1016/j.jweia.2019.02.005.
  33. Huang, G. and Chen, X. (2007), "Wind load effects and equivalent static wind loads of tall buildings based on synchronous pressure measurements", Eng. Struct., 29(10), 2641-2653. https://doi.org/10.1016/j.engstruct.2007.01.011.
  34. Ierimonti, L., Caracoglia, L., Venanzi, I. and Materazzi, A.L. (2017), "Investigation on life-cycle damage cost of windexcited tall buildings considering directionality effects", J Wind Eng. Indus. Aerod., 171, 207-218. https://doi.org/10.1016/j.jweia.2017.09.020.
  35. IS 456 (2000), "Plain and reinforced concrete - Code of practice", Bureau of Indian Standards, India.
  36. IS 4998-I (2015), "Criteria for Design of Reinforced Concrete Chimneys, Part-I, Assessment of Loads", Bureau of Indian Standards, India.
  37. IS 875 (III) (1987), "Code of Practice for Design Loads (Other Than Earthquake) For Buildings and Structures Part 3 Wind Loads", Bureau of Indian Standards, India.
  38. IS 875 (III) (2015), "Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice Part 3 Wind Loads (Third Revision)", Bureau of Indian Standards, India.
  39. Kaimal, J.C., Wyngaard, J.C., Izumi, Y. and Cote, O.R. (1972), "Spectral characteristics of surface-layer turbulence", Q. J. Roy. Meteorol. Soc., 98(417), 563-589. https://doi.org/10.1002/qj.49709841707.
  40. Karaca, Z. and Turkeli, E. (2014), "The slenderness effect on wind response of industrial reinforced concrete chimneys", Wind Struct., 18(3), 281-294. https://doi.org/10.12989/was.2014.18.3.281.
  41. Kareem, A. (1988), "Effect of parametric uncertainties on wind excited structural response", J. Wind Eng. Indus. Aerod., 30(1-3), 233-241. https://doi.org/10.1016/0167-6105(88)90088-8.
  42. Kareem, A. (1990), "Reliability analysis of wind-sensitive structures", J. Wind Eng. Indus. Aerod., 33(3), 495-514. https://doi.org/10.1016/0167-6105(90)90004-V.
  43. Kareem, A. and Hseih, J. (1986), "Reliability analysis of concrete chimneys under wind loading", J. Wind Eng. Indus. Aerod., 25(1), 93-112. https://doi.org/10.1016/0167-6105(86)90106-6.
  44. Le, V. and Caracoglia, L. (2020), "Life-cycle cost analysis of a point-like structure subjected to tornadic wind loads", J. Struct. Eng., 146(2), 04019194. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002480.
  45. Lee, K.H. and Rosowsky, D.V. (2006), "Fragility curves for woodframe structures subjected to lateral wind loads", Wind Struct., 9(3), 217-230. https://doi.org/10.12989/was.2006.9.3.217.
  46. Li, Y., Liao, H. and Qiang, S. (2004), "Simplifying the simulation of stochastic wind velocity fields for long cable-stayed bridges", Comput. Struct., 82(20-21), 1591-1598. https://doi.org/10.1016/j.compstruc.2004.05.007.
  47. Liang, S., Yang, W., Song, J., Wang, L. and Hu, G. (2018), "Windinduced responses of a tall chimney by aeroelastic wind tunnel test using a continuous model", Eng. Struct., 176, 871-880. https://doi.org/10.1016/j.engstruct.2018.09.015.
  48. Lipecki, T. and Flaga, A. (2017), "Application of simulation methods of stochastic processes to vortex excitation", Arch. Civ. Eng., 63(1), 77-97. https://doi.org/10.1515/ace-2017-0006.
  49. Liu, Z., Liu, Z. and Peng, Y. (2018), "Simulation of multivariate stationary stochastic processes using dimension-reduction representation methods", J. Sound Vib., 418, 144-162. https://doi.org/10.1016/j.jsv.2017.12.029.
  50. Low, H.Y. and Hao, H. (2001), "Reliability analysis of reinforced concrete slabs under explosive loading", Struct. Saf., 23(2), 157-178. https://doi.org/10.1016/S0167-4730(01)00011-X.
  51. Manohar, S.N. (1985), "Tall Chimneys", Tata McGraw-Hill Publishing Company Limited, New Delhi, India.
  52. Martinez-Vazquez, P. (2016), "Wind-induced vibrations of structures using design spectra", Intl. J. Adv. Struct. Eng., 8, 379-389. https://doi.org/10.1007/s40091-016-0139-4.
  53. Masoomi, H. and van de Lindt, J.W. (2016), "Tornado fragility and risk assessment of an archetype masonry school building", Eng. Struct., 128, 26-43. https://doi.org/10.1016/j.engstruct.2016.09.030.
  54. Massey, F.J. (1951), "The Kolmogorov-Smirnov test for goodness of fit", J. Am. Stat. Assoc., 46(253), 68-78. https://doi.org/10.1080/01621459.1951.10500769.
  55. McKay, M.D., Beckman, R.J. and Conover, W.J. (2000), "A comparison of three methods for selecting values of input variables in the analysis of output from a computer code", Technometrics, 42(1), 55-61. https://doi.org/10.1080/00401706.2000.10485979.
  56. Morgan, E.C., Matthew, L., Vogel, R.M. and Baise L.G. (2011), "Probability distributions for offshore wind speeds", Energy Convers. Manage., 52(1), 15-26. https://doi.org/10.1016/j.enconman.2010.06.015.
  57. Myers, R.H., Montgomery, D.C. and Anderson-Cook, C.M. (2016), "Response Surface Methodology: Process and Product in Optimization Using Designed Experiments", John Wiley & Sons, Inc. New York, NY, U.S.A.
  58. Park, S.J., Jang, D., Yook, S.J. and Lee, K.S. (2016), "Optimization of a chimney design for cooling efficiency of a radial heat sink in a LED downlight", Energy Convers. Manage, 114, 180-187. https://doi.org/10.1016/j.enconman.2016.02.024.
  59. Peng, Y., Wang, S. and Li, J. (2018b), "Field measurement and investigation of spatial coherence for near-surface strong winds in Southeast China", J. Wind Eng. Indus. Aerod., 172, 423-440. https://doi.org/10.1016/j.jweia.2017.11.012.
  60. Peng, Y., Wang, Z. and Ai, X. (2018a), "Wind-induced fragility assessment of urban trees with structural uncertainties", Wind Struct., 26(1), 45-56. https://doi.org/10.12989/was.2018.26.1.045.
  61. Popescu, R., Deodatis, G. and Prevost, J.H. (1998), "Simulation of homogeneous nonGaussian stochastic vector fields", Probab. Eng. Mech., 13(1), 1-13. https://doi.org/10.1016/S0266-8920(97)00001-5.
  62. Rasmussen, C.E. and Williams, C.K.I. (2006). Gaussian processes for machine learning, MIT Press, Cambridge.
  63. Reuter, I., Voigt, M., Mailach, R., Becker, K.H., Fischersworring-Bunk, A., Schlums, H. and Ivankovic, M. (2017), "Moving least squares metamodels.-hyperparameter, variable reduction and model selection", In: Caspeele, R., Taerwe, L., Proske, D. (eds) 14th International Probabilistic Workshop, Springer, Cham. https://doi.org/10.1007/978-3-319-47886-9_5.
  64. Sancibrian, R., Lombillo, I., Sarabia, E.G., Boffill, Y., Wong, H. and Villegas, L. (2017), "Dynamic identification and condition assessment of an old masonry chimney by using modal testing", Procedia Eng, 199, 3410-3415. https://doi.org/10.1016/j.proeng.2017.09.485.
  65. Saranyasoontorn, K., Manuel, L. and Veers, P.S. (2004), "A comparison of standard coherence models for inflow turbulence with estimates from field measurements" ASME. J Sol Energy Eng, 126(4), 1069-1082. https://doi.org/10.1115/1.1797978
  66. Shinozuka, M. (1971), "Simulation of multivariate and multidimensional random processes" J. Acoust. Soc. Am., 49(1), 357-368. https://doi.org/10.1121/1.1912338.
  67. Simiu, E. and Scanlan, H.R. (1986), "Wind effects on structure", John Wiley and Sons, New York, NY.
  68. Simiu, E. and Yeo, D.H. (2019), "Wind effects on structure", John Wiley and Sons, New York, N.Y.
  69. Smith, M.A. and Caracoglia, L. (2011), "A Monte Carlo based method for the dynamic fragility analysis of tall buildings under turbulent wind loading", Eng. Struct, 33(2), 410-420. https://doi.org/10.1016/j.engstruct.2010.10.024.
  70. Tabbuso, P., Spence, S.M.J., Palizzolo, L., Pirrotta, A. and Kareem, A. (2016), "An efficient framework for the elastoplastic reliability assessment of uncertain wind excited systems", Struct. Saf., 58, 69-78. https://doi.org/10.1016/j.strusafe.2015.09.001.
  71. Taflanidis, A.A. and Cheung, S.H. (2012), "Stochastic sampling using moving least squares response surface methodologies", Probab. Eng. Mech., 28, 216-224. https://doi.org/10.1016/j.probengmech.2011.07.003.
  72. Venanzi, I. and Materazzi, A.L. (2012), "Acrosswind aeroelastic response of square tall buildings: a semi-analytical approach based of wind tunnel tests on rigid models", Wind Struct., 15(6), 495-508. https://doi.org/10.12989/was.2012.15.6.495.
  73. Venanzi, I., Materazzi, A.L. and Ierimonti, L. (2015), "Robust and reliable optimization of wind-excited cable-stayed masts", J. Wind Eng. Ind. Aerodyn., 147, 368-379. https://doi.org/10.1016/j.jweia.2015.07.011.
  74. Vickery, B.J. and Basu, R.I. (1983), "Across-wind vibrations of structures of circular cross-section. Part I. Development of a mathematical model for two-dimensional conditions", J. Wind Eng. Indus. Aerod., 12(1), 49-73. https://doi.org/10.1016/0167-6105(83)90080-6.
  75. Wright, S. (1921), "Correlation and causation", J. Agric. Res., 20(7), 557-585.
  76. Xu, J., Spencer, B.F., Lu, X., Chen, X. and Lu, L. (2017), "Optimization of structures subject to stochastic dynamic loading", Comput. Aided Civil Infrastruct. Eng., 32(8), 657-673. https://doi.org/10.1111/mice.12274.
  77. Zeng, X., Peng, Y. and Chen, J. (2017), "Serviceability-based damping optimization of randomly wind-excited high-rise buildings", Struct. Des. Tall Spec., 26(11), e1371. https://doi.org/10.1002/tal.1371.
  78. Zhang, L.L., Li, J. and Peng, Y. (2008), "Dynamic response and reliability analysis of tall buildings subject to wind loading", J. Wind Eng. Indus. Aerod., 96(1), 25-40. https://doi.org/10.1016/j.jweia.2007.03.001.
  79. Zhao, W., Fan, F. and Wang, W. (2017), "Non-linear partial least squares response surface method for structural reliability analysis", Reliab. Eng. Syst. Safe, 161, 69-77. https://doi.org/10.1016/j.ress.2017.01.004.
  80. Zhou, C., Tian, M., Wang, P. and Zhang, X. (2017), "Analysis on structural fragility of a high-rise RC chimney considering ground motion directionality", J. Hunan Univ. (Nat. Sci.), 44(11), 11-22. https://doi.org/10.16339/j.cnki.hdxbzkb.2017.11.002.
  81. Zhou, C., Zeng, X., Pan, Q. and Liu, B. (2015), "Seismic fragility assessment of a tall reinforced concrete chimney", Struct. Des. Tall Spec., 24(6), 440-460. https://doi.org/10.1002/tal.1173.