Advances in concrete construction

  • 제10권1호
  • /
  • Pages.1-11
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of hybrid polypropylene-steel fibres on strength characteristics of UHPFRC

  • Nuaklong, Peem (Innovative Construction Materials Research Unit, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Chittanurak, Jithaporn (Innovative Construction Materials Research Unit, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Jongvivatsakul, Pitcha (Innovative Construction Materials Research Unit, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Pansuk, Withit (Innovative Construction Materials Research Unit, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Lenwari, Akhrawat (Composite Structures Research Unit, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University) ;
  • Likitlersuang, Suched (Centre of Excellence in Geotechnical and Geoenvironmental Engineering, Department of Civil Engineering, Faculty of Engineering, Chulalongkorn University)
  • 투고 : 2020.03.16
  • 심사 : 2020.06.10
  • 발행 : 2020.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study intends to produce an ultra-high performance fibre reinforced concrete (UHPFRC) made with hybrid fibres (i.e., steel and polypropylene). Compressive and tensile strength characteristics of the hybrid fibres UHPFRC are considered. A total of 14 fibre-reinforced composites (FRCs) with different fibre contents or types of fibres were prepared and tested in order to determine a suitable hybrid fibre combination. The compressive and tensile strengths of each concrete at 7 days were determined. The results showed that a hybrid mix of micro-polypropylene and steel fibres exhibited good compromising performances and is the ideal reinforcement mixture in a strong, cost-effective UHPFRC. In addition, maximum compressive strength of 167 MPa was achieved for UHPFRC using 1.5% steel fibres blended with 0.5% macro-polypropylene fibres.

키워드

과제정보

This research was supported by the Thailand Research Fund (Grant No. RGU6280001) and the Ratchadapisek Sompoch Endowment Fund (2020), Chulalongkorn University (763014 Climate Change and Disaster Management Cluster). The authors would like to thank the Siam Cement Group (SCG) for supporting materials during tests. Endorsement by SCG is not implied and should not be assumed. The first author would like to acknowledge the Ratchadapisek Somphot Fund for Postdoctoral Fellowship, Chulalongkorn University.

참고문헌

  1. AFGC (2013), Recommendation: Ultra High Performance Fibre-Reinforced Concretes, French Association of Civl Engineering Structure Design, and Control, Bagneux, France.
  2. Afroughsabet, V., Biolzi, L. and Monteiro, P.J. (2018), "The effect of steel and polypropylene fibers on the chloride diffusivity and drying shrinkage of high-strength concrete", Compos. Part B. Eng., 139, 84-96. https://doi.org/10.1016/j.compositesb.2017.11.047.
  3. Afroughsabet, V., Geng, G., Lin, A., Biolzi, L., Ostertag, C.P. and Monteiro, P.J. (2019), "The influence of expansive cement on the mechanical, physical, and microstructural properties of hybrid-fiber-reinforced concrete", Cement Concrete Compos., 96, 21-32. https://doi.org/10.1016/j.cemconcomp.2018.11.012.
  4. ASTM C109 (2016), Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), American Society for Testing and Material, West Conshohocken, PA, USA.
  5. ASTM C1611 (2014), Standard Test Method for Slump Flow of Self-Consolidating Concrete, American Society for Testing and Material, West Conshohocken, PA, USA.
  6. ASTM C305 (2014), Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, American Society for Testing and Material, West Conshohocken, PA, USA.
  7. Banthia, N. and Gupta, R. (2004), "Hybrid fiber reinforced concrete (HyFRC): fiber synergy in high strength matrices", Mater. Struct., 37(10), 707-716. https://doi.org/10.1007/BF02480516.
  8. Banthia, N. and Gupta, R. (2006), "Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete", Cement Concrete Res., 36(7), 1263-1267. https://doi.org/10.1016/j.cemconres.2006.01.010.
  9. Di Maida, P., Radi, E., Sciancalepore, C. and Bondioli, F. (2015), "Pullout behavior of polypropylene macro-synthetic fibers treated with nano-silica", Constr. Build. Mater., 82, 39-44. https://doi.org/10.1016/j.conbuildmat.2015.02.047.
  10. EFNARC (2005), The European Guidelines for Self-Compacting Concrete Specification, Production and Use, Surrey, UK.
  11. Ganesan, N., Sahana, R. and Indira, P.V. (2017), "Effect of hybrid fibers on tension stiffening of reinforced geopolymer concrete", Adv. Concrete Constr., 5(1), 75. https://doi.org/10.12989/acc.2017.5.1.75.
  12. Habel, K., Viviani, M., Denarie, E. and Bruhwiler, E. (2006), "Development of the mechanical properties of an ultra-high performance fiber reinforced concrete (UHPFRC)", Cement Concrete Res., 36(7), 1362-1370. https://doi.org/10.1016/j.cemconres.2006.03.009.
  13. Hannawi, K., Bian, H., Prince-Agbodjan, W. and Raghavan, B. (2016), "Effect of different types of fibers on the microstructure and the mechanical behavior of ultra-high performance fiber-reinforced concretes", Compos. Part B. Eng., 86, 214-220. https://doi.org/10.1016/j.compositesb.2015.09.059.
  14. Hassan, A.M.T., Jones, S.W. and Mahmud, G.H. (2012), "Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC)", Constr. Build. Mater., 37, 874-882. https://doi.org/10.1016/j.conbuildmat.2012.04.030.
  15. Huang, H., Gao, X., Li, L. and Wang, H. (2018), "Improvement effect of steel fiber orientation control on mechanical performance of UHPC", Constr. Build. Mater., 188, 709-721. https://doi.org/10.1016/j.conbuildmat.2018.08.146.
  16. Kabele, P. (2007), "Multiscale framework for modeling of fracture in high performance fiber reinforced cementitious composites", Eng. Fract. Mech., 74(1-2), 194-209. https://doi.org/10.1016/j.engfracmech.2006.01.020.
  17. Kim, D.J., Park, S.H., Ryu, G.S. and Koh, K.T. (2011), "Comparative flexural behavior of hybrid ultra high performance fiber reinforced concrete with different macro fibers", Constr. Build. Mater., 25(11), 4144-4155. https://doi.org/10.1016/j.conbuildmat.2011.04.051.
  18. Le Hoang, A. and Fehling, E. (2017), "Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete", Constr. Build. Mater., 153, 790-806. https://doi.org/10.1016/j.conbuildmat.2017.07.130.
  19. Li, B., Chi, Y., Xu, L., Shi, Y. and Li, C. (2018), "Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete", Constr. Build. Mater., 191, 80-94. https://doi.org/10.1016/j.conbuildmat.2018.09.202.
  20. Li, Y., Tan, K.H. and Yang, E.H. (2019), "Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature", Cement Concrete Compos., 96, 174-181. https://doi.org/10.1016/j.cemconcomp.2018.11.009.
  21. Mehta, P.K. and Monteiro, P.J.M (2006), Concrete: Microstructure, Properties and Materials, McGraw-Hill Education, New York, NA, USA.
  22. Midhun, M.S., Rao, T.G. and Srikrishna, T.C. (2018), "Mechanical and fracture properties of glass fiber reinforced geopolymer concrete", Adv. Concrete Constr., 6(1), 29. https://doi.org/10.12989/acc.2018.6.1.029.
  23. Naaman, A.E. and Reinhardt, H.W. (2006), "Proposed classification of HPFRC composites based on their tensile response", Mater. Struct., 39(5), 547-555. https://doi.org/10.1617/s11527-006-9103-2.
  24. Nili, M. and Afroughsabet, V. (2010), "The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete", Constr. Build. Mater., 24(6), 927-933. https://doi.org/10.1016/j.conbuildmat.2009.11.025.
  25. Pakravan, H.R., Latifi, M. and Jamshidi, M. (2017), "Hybrid short fiber reinforcement system in concrete: A review", Constr. Build. Mater., 142, 280-294. https://doi.org/10.1016/j.conbuildmat.2017.03.059.
  26. Park, S.H., Kim, D.J., Ryu, G.S. and Koh, K.T. (2012), "Tensile behavior of ultra high performance hybrid fiber reinforced concrete", Cement Concrete Compos., 34(2), 172-184. https://doi.org/10.1016/j.cemconcomp.2011.09.009.
  27. Park, S.H., Ryu, G.S., Koh, K.T. and Kim, D.J. (2014), "Effect of shrinkage reducing agent on pullout resistance of high-strength steel fibers embedded in ultra-high-performance concrete", Cement Concrete Compos., 49, 59-69. https://doi.org/10.1016/j.cemconcomp.2013.12.012.
  28. Pereira, E.B., Fischer, G. and Barros, J.A. (2012), "Effect of hybrid fiber reinforcement on the cracking process in fiber reinforced cementitious composites", Cement Concrete Compos., 34(10), 1114-1123. https://doi.org/10.1016/j.cemconcomp.2012.08.004.
  29. Punurai, W., Kroehong, W., Saptamongkol, A. and Chindaprasirt, P. (2018), "Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste", Constr. Build. Mater., 186, 62-70. https://doi.org/10.1016/j.conbuildmat.2018.07.115.
  30. Qi, J., Wang, J. and Feng, Y. (2019), "Shear performance of an innovative UHPFRC deck of composite bridge with coarse aggregate", Adv. Concrete Constr., 7(4), 219-229. https://doi.org/10.12989/acc.2019.7.4.219.
  31. Qian, C.X. and Stroeven, P. (2000), "Development of hybrid polypropylene-steel fibre-reinforced concrete", Cement Concrete Res., 30(1), 63-69. https://doi.org/10.1016/S0008-8846(99)00202-1.
  32. Robins, P., Austin, S. and Jones, P. (2002), "Pull-out behaviour of hooked steel fibres", Mater. Struct., 35(7), 434-442. https://doi.org/10.1007/BF02483148.
  33. Shaikh, F.U.A. and Taweel, M. (2015), "Compressive strength and failure behaviour of fibre reinforced concrete at elevated temperatures", Adv. Concrete Constr., 3(4), 283-93. http://dx.doi.org/10.12989/acc.2015.3.4.283.
  34. Sharma, R. and Bansal, P.P. (2019), "Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete", Adv. Concrete Constr., 8(1), 21-31. https://doi.org/10.12989/acc.2019.8.1.021.
  35. Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z. and Fang, Z. (2015), "A review on ultra high performance concrete: Part I. Raw materials and mixture design", Constr. Build. Mater., 101, 741-751. https://doi.org/10.1016/j.conbuildmat.2015.10.088.
  36. Song, P.S. and Hwang, S. (2004), "Mechanical properties of high-strength steel fiber-reinforced concrete", Constr. Build. Mater., 18(9), 669-673. https://doi.org/10.1016/j.conbuildmat.2004.04.027.
  37. Song, P.S., Hwang, S. and Sheu, B.C. (2005), "Strength properties of nylon-and polypropylene-fiber-reinforced concretes", Cement Concrete Res., 35(8), 1546-1550. https://doi.org/10.1016/j.cemconres.2004.06.033.
  38. Toutanji, H., McNeil, S. and Bayasi, Z. (1998), "Chloride permeability and impact resistance of polypropylene-fiber-reinforced silica fume concrete", Cement Concrete Res., 28(7), 961-968. https://doi.org/10.1016/S0008-8846(98)00073-8.
  39. Wille, K., El-Tawil, S. and Naaman, A.E. (2014), "Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading", Cement Concrete Compos., 48, 53-66. https://doi.org/10.1016/j.cemconcomp.2013.12.015.
  40. Wille, K., Kim, D.J. and Naaman, A.E. (2011), "Strain-hardening UHP-FRC with low fiber contents", Mater. Struct., 44(3), 583-598. https://doi.org/10.1617/s11527-010-9650-4.
  41. Wille, K., Naaman, A.E., El-Tawil, S. and Parra-Montesinos, G.J. (2012), "Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing", Mater. Struct., 45(3), 309-324. https://doi.org/10.1617/s11527-011-9767-0.
  42. Yao, W., Li, J. and Wu, K. (2003), "Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction", Cement Concrete Res., 33(1), 27-30. https://doi.org/10.1016/S0008-8846(02)00913-4.
  43. Yoo, D.Y., Banthia, N., Kim, S.W. and Yoon, Y.S. (2015), "Response of ultra-high-performance fiber-reinforced concrete beams with continuous steel reinforcement subjected to low-velocity impact loading", Compos. Struct., 126, 233-245. https://doi.org/10.1016/j.compstruct.2015.02.058.
  44. Yoo, D.Y., Kang, S.T. and Yoon, Y.S. (2014a), "Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC", Constr. Build. Mater., 64, 67-81. https://doi.org/10.1016/j.conbuildmat.2014.04.007.
  45. Yoo, D.Y., Shin, H.O., Yang, J.M. and Yoon, Y.S. (2014b), "Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers", Compos. Part B. Eng., 58, 122-133. https://doi.org/10.1016/j.compositesb.2013.10.081.
  46. Yu, R., Spiesz, P. and Brouwers, H.J.H. (2014a), "Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)", Cement Concrete Res., 56, 29-39. https://doi.org/10.1016/j.cemconres.2013.11.002.
  47. Yu, R., Spiesz, P. and Brouwers, H.J.H. (2014b), "Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): experiments and modeling", Constr. Build. Mater., 68, 158-171. https://doi.org/10.1016/j.conbuildmat.2014.06.033.
  48. Zhou, M., Lu, W., Song, J. and Lee, G.C. (2018), "Application of ultra-high performance concrete in bridge engineering", Constr. Build. Mater., 186, 1256-1267. https://doi.org/10.1016/j.conbuildmat.2018.08.036.

피인용 문헌

  1. The use of river sand for fine aggregate in UHPC and the effect of its particle size vol.10, pp.5, 2020, https://doi.org/10.12989/acc.2020.10.5.431
  2. Microstructure and mechanical behavior of cementitious composites with multi-scale additives vol.11, pp.2, 2020, https://doi.org/10.12989/acc.2021.11.2.163
  3. Experimental comparability between steam and normal curing methods on tensile behavior of RPC vol.11, pp.4, 2020, https://doi.org/10.12989/acc.2021.11.4.347