References
- Afshar-Mohajer N, Wu CY, Ladun T, Rajon DA, Huang Y. Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer. J Build Environ. 2015;93(2):293-301 https://doi.org/10.1016/j.buildenv.2015.07.013
- Azimi P, Zhao D, Pouzet C, Crain NE, Stephenes B. Emissions of ultrafine particles and volatile organic compounds from commercially available desktop three-dimensional printers with multiple filaments. Environ Sci & Tech. 2016;50(3):1260-1268 https://doi.org/10.1021/acs.est.5b04983
- Azimi P, Fazli T, Stephens B. Predicting concentrations of ultrafine particles and volatile organic compounds resulting from desktop 3D printer operation and the impact of potential control strategies. J of Ind Eco. 2017;21(S1)
- Deng Y, Cao SJ, Chen A, Guo Y. The impact of manufacturing parameters on submicron particle emissions from a desktop 3D printer in the perspective of emission reduction. J Build Environ. 2016;104:311-319 https://doi.org/10.1016/j.buildenv.2016.05.021
- Davis AY, Zhang Q, Wong PS, Weber RJ, Black MS. Characterization of volatile organic compound emissions from consumer level material extrusion 3D printers. J Build Environ. 2019;160:106209 https://doi.org/10.1016/j.buildenv.2019.106209
- Floyd EL, Wang J, Regens J. Fume emissions from a low-cost 3-D printer with various filaments. J Occup Environ Hyg. 2017;14(7):523-533 https://doi.org/10.1080/15459624.2017.1302587
- Gu JW, Wensing M, Uhde E, Salthammer T. Characterization of particulate and gaseous pollutants emitted during operation of a desktop 3D printer. J Environ Inter. 2019;123:476-485 https://doi.org/10.1016/j.envint.2018.12.014
- House R, Rajaram N, Tarlo SM. Case report of asthma associated with 3D printing. Occup Med(Lond). 2017;67(8):652-654 https://doi.org/10.1093/occmed/kqx129
- Jeon KY, Lee JD, Kang SC. 3D printing industry status and market trend. KEIT.; 2016. Vol. 16-06
- Jacobsen E, Nielsen IB, Schjoth-Eskesen J, Fischer CH, Larsen PB et al. Risk assessment of 3D printers and 3D printed products. Ministry of Environment and Food of Denmark.; 2017. No. 161
- Kim YN, Yoon CS, Ham SH, Park JH, Kim SH et al. Emissions of nanoparticles and gaseous material from 3D printer. J Environ Sci Tech. 2015;49(20):12044-12053 https://doi.org/10.1021/acs.est.5b02805
- Kwon OH. Control of particulate material emission during 3D printing. master's thesis, Seoul National University of Korea, Seoul. 2016. p. 33-44
- Kim SH, Jeong EK, Kim SD. Ultrafine particles, chemical and metal from 3D printers in real 3D printing sites. OSHRI.; 2018. No. 889:16-24
- Mendes L. Kangas A, Kukko K, Molgaard B, Saamanen A et al. Characterization of Emissions from a Desktop 3D Printer. J Indus Ecolo. 2017;21(S1):94-106
- Stepnens B, Azimi P, Orch ZE, Ramos T. Ultrafine particle emissions from desktop 3D printers. J Atomo Environ. 2013;79:334-339 https://doi.org/10.1016/j.atmosenv.2013.06.050
- Steinle P. Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings. J Occup Environ Hyg. 2016;13(2):121-132 https://doi.org/10.1080/15459624.2015.1091957
- Stabile L, Scungio M, Buonanno G, Arpino F, Ficco G. Airborne particle emission of a commercial 3D printer: the effect of filament material and printing temperature. J Ind Air. 2017;27:398-408 https://doi.org/10.1111/ina.12310
- Stefaniak AB, LeBouf RF, Yi JH, Ham J, Nurkewicz T et al. Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dmensional printer. J Occup Environ Hyg. 2017;14(7):540-550 https://doi.org/10.1080/15459624.2017.1302589
- Stefaniak AB, Hammond DR, Johnson AR, Knepp AK, LeBouf RF. Evaluation of 3-D printer emissions and personal exposures at a manufacturing workplace. NIOSH.; 2017. No. 2017-0059-3291
- Stefaniak AB, Bowers LL, Knepp AK, Luxton TP, Peloquin DM et al. Particle and vapor emissions from vat polymerization desktop-scale 3-dimensional printers. J Occup Environ Hyg. 2019;16(8):519-531 https://doi.org/10.1080/15459624.2019.1612068
- Vance ME, Pegues V, Montfrans SV, Leng W, Marr LC. Aerosol emissions from fuse-deposition modeling 3D printers in a chamber and in real indoor environments. J Environ Sci Tech. 2017;51:9516-9523 https://doi.org/10.1021/acs.est.7b01546
- Vaisanen AJL, Hyttinen M, Ylonen S, Alinen L. Occupational exposure to gaseous and particulate contaminants originating from additive manufacturing of liquid, powdered, and filament plastic materials and related pose-processes. J Occup Environ Hyg. 2019;16(3):258-271 https://doi.org/10.1080/15459624.2018.1557784
- Yi JH, LeBouf RF, Duling MG, Nurkiewicz T, Chen BT et al. Emission of particulate matter from a desktop three-dimensional (3D) printer. J Toxi Environ Heal. 2016;79(11):453-465 https://doi.org/10.1080/15287394.2016.1166467
- Yang CJ, Hwang SH, Choi HC, Kim JW, Lee Y et al. 3D printing industry status and trend analysis report in 2017. NIPA.; 2017
- Zhou Y, Kong X, Chen A, Cao S. Investigation of Ultrafine Particle Emissions of Desktop 3D Printers in the Clean Room. J Proce Engin. 2015;121:506-512 https://doi.org/10.1016/j.proeng.2015.08.1099
- Zhang Q, Wong J, Davis AY, Black MS, Weber RJ. Characterization of particle emissions from consumer fused deposition modeling 3D printers. J Aero Scien Tech. 2017;51(11):1275-1286 https://doi.org/10.1080/02786826.2017.1342029