Structural Engineering and Mechanics

  • 제75권1호
  • /
  • Pages.101-108
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Anisotropic continuum damage analysis of thin-walled pressure vessels under cyclic thermo-mechanical loading

  • 투고 : 2019.11.13
  • 심사 : 2020.02.12
  • 발행 : 2020.07.10
⟨ 이전 논문 다음 논문 ⟩

초록

The present study intends to analyze damage in thin-walled steel cylinders undergoing constant internal pressure and thermal cycles through use of anisotropic continuum damage mechanics (CDM) model coupled with nonlinear kinematic hardening rule of Chaboche. Materials damage in each direction was defined based on plastic strain and its direction. Stress and strain distribution over wall-thickness was described based on the CDM model and the return mapping algorithm was employed based on the consistency condition. Plastic zone expansion across the wall thickness of cylinders was noticeably affected with change in internal pressure and temperature gradients. Expansion of plastic zone over wall-thickness at inner and outer surfaces and their boundaries demarking elastic and plastic regions was attributed to the magnitude of damage induced over thermomechanical cycles on the thin-walled samples tested at various pressure stresses.

키워드

참고문헌

  1. Benzerga, A. A., Besson, J. and Pineau, A. (2004), "Anisotropic ductile fracture: Part I: experiments", Acta Materialia, 52(15), 4623-4638. https://doi.org/10.1016/j.actamat.2004.06.020.
  2. Beesley, R., Chen, H. and Hughes, M. (2017), "A novel simulation for the design of a low cycle fatigue experimental testing programme", Comput. Struct., 178, 105-118. https://doi.org/10.1016/j.compstruc.2016.09.004.
  3. Bree, J. (1967), "Elastic-plastic behaviour of thin tubes subjected to internal pressure and intermittent high-heat fluxes with application to fast-nuclear-reactor fuel elements", J. Strain Anal., 2(3), 226-238. https://doi.org/10.1243/03093247V023226.
  4. Chow, C. L. and Wang, J. (1987), "An anisotropic theory of continuum damage mechanics for ductile fracture", Eng. Fracture Mech., 27(5), 547-558. https://doi.org/10.1016/0013-7944(87)90108-1.
  5. Cordebois, J. and Sidoroff, F. (1982), "Anisotropic damage in elasticity and plasticity", Journal de mecanique theorique et appliquee, 45-60.
  6. Hill, R. (1998), The Mathematical Theory of Plasticity (Vol. 11). Oxford University Press, Oxford, United Kingdom.
  7. Kachanov, L. M. (1999), "Rupture time under creep conditions", J. Fracture, 97(1-4), 11-18. https://doi.org/10.1023/A:1018671022008.
  8. Krajcinovic, D. and Mastilovic, S. (1995), "Some fundamental issues of damage mechanics", Mech. Mater., 21(3), 217-230. https://doi.org/10.1016/0167-6636(95)00010-0.
  9. Lemaitre, J. and Desmorat, R. (2005), Engineering Damage Mechanics: Ductile, Creep, Fatigue And Brittle Failures, Springer Science and Business Media, Germany.
  10. Lemaitre, J., Desmorat, R. and Sauzay, M. (2000), "Anisotropic damage law of evolution", Europ. J. Mech. A/Solids, 19(2), 187-208. https://doi.org/10.1016/S0997-7538(00)00161-3.
  11. Nayebi, A. (2010), "Analysis of bree's cylinder with nonlinear kinematic hardening behavior", Iran. J. Sci. Technol., 34(B5), 487.
  12. Nayebi, A. (2010), "Influence of continuum damage mechanics on the Bree's diagram of a closed end tube", Mater. Design, 31(1), 296-305. https://doi.org/10.1016/j.matdes.2009.06.014.
  13. Nayebi, A. and El Abdi, R. (2002), "Cyclic plastic and creep behaviour of pressure vessels under thermomechanical loading", Comput. Mater. Sci., 25(3), 285-296. https://doi.org/10.1016/S0927-0256(02)00218-5.
  14. Nouailhas, D. (1980). Etude experimentale de l'endomagement de plasticite ductile anisotrope. thcse de doctorat de l'universite Paris-6, Paris.
  15. Pi, A., Huang, F., Wu, Y. and Zhang, Z. (2014), "Anisotropic constitutive model and numerical simulations for crystalline energetic material under shock loading", Math. Mech. Solids, 19(6), 640-658. https://doi.org/10.1177/1081286513482322.
  16. Sirumbal-Zapata, L. F., Malaga-Chuquitaype, C. and Elghazouli, A.Y. (2018), "A three-dimensional plasticity-damage constitutive model for timber under cyclic loads", Comput. Struct., 195, 47-63. https://doi.org/10.1016/j.compstruc.2017.09.010.
  17. Surmiri, A., Nayebi, A. and Rokhgireh, H. (2018). "Shakedown-ratcheting analysis of Bree's problem by anisotropic continuum damage mechanics coupled with nonlinear kinematic hardening model", J. Mech. Sci., 137, 295-303. https://doi.org/10.1016/j.ijmecsci.2018.01.030.
  18. Shahani, A. R. and Momeni Bashusqeh, S. (2014). "Analytical solution of the thermoelasticity problem in a pressurized thickwalled sphere subjected to transient thermal loading", Math. Mech. Solids, 19(2), 135-151. https://doi.org/10.1177/1081286512455657.
  19. Simo, J. C. and Hughes, T. J. (2006). Computational Inelasticity (Vol. 7), Springer Science and Business Media, Germany.
  20. Varvani‐Farahani, A. and Nayebi, A. (2018). "Ratcheting in pressurized pipes and equipment: a review on affecting parameters, modelling, safety codes and challenges", Fatigue Fracture Eng. Mater. Struct., 41(3), 503-538. https://doi.org/10.1111/ffe.12775.