Structural Engineering and Mechanics

  • 제75권1호
  • /
  • Pages.19-32
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Fatigue analysis of partly damaged RC slabs repaired with overlaid UHPFRC

  • 투고 : 2019.09.09
  • 심사 : 2020.02.06
  • 발행 : 2020.07.10
⟨ 이전 논문 다음 논문 ⟩

초록

Due to repetitive traffic loadings and environmental attacks, reinforced concrete (RC) bridge deck slabs are suffering from severe degradation, which makes structural repairing an urgency. In this study, the fatigue performance of an RC bridge deck repairing technique using ultra-high performance fiber reinforcement concrete (UHPFRC) overlay is assessed experimentally with a wheel-type loading set-up as well as analytically based on finite element method (FEM) using a crack bridging degradation concept. In both approaches, an original RC slab is firstly preloaded to achieve a partly damaged RC slab which is then repaired with UHPFRC overlay and reloaded. The results indicate that the developed analytical method can predict the experimental fatigue behaviors including displacement evolutions and crack patterns reasonably well. In addition, as the shear stress in the concrete/UHPFRC interface stays relatively low over the calculations, this interface can be simply simulated as perfect. Moreover, superior to the experiments, the numerical method provides fatigue behaviors of not only the repaired but also the unrepaired RC slabs. Due to the high strengths and cracking resistance of UHPFRC, the repaired slab exhibited a decelerated deterioration rate and an extended fatigue life compared with the unrepaired slab. Therefore, the proposed repairing scheme can afford significant strengthen effects and act as a reference for future practices and engineering applications.

키워드

과제정보

The authors would like to express their appreciation to the Prof. Shigeyuki Matsui of Osaka Institute of Technology, Mr. Tetsuya Okamura and Mr. Yasuo Kosaka for their valuable supports and discussions.

참고문헌

  1. Abe, T., Suzuki, H., Kishi, Y. and Nomoto, K. (2013), "The effect of adhesive on the fatigue resistance of RC slabs strengthened by SFRC upper surface thickness increasing method", J. Struct. Eng., 59A, 1084-1091. https://doi.org/10.11532/structcivil.59A.1084.
  2. Association Française du Genie Civil (2013), "Betons fibres a ultra-hautes performances (Ultra high performance fibre-reinforced concretes)", SETRA - Service d'etudes techniques des routes et autoroutes, AFGC.
  3. Bache, H.H. (1987), Introduction to Compact Reinforced Composite, Nordic Concrete Federation
  4. Bruhwiler, E. and Denarie, E. (2008), "Rehabilitation of concrete structures using ultra-high performance fibre reinforced concrete", Proceedings of UHPC-2008: the 2nd International Symposium on Ultra-HighPerformance Concrete, Kassel, Germany, 1-8. https://doi.org/10.2749/101686613X13627347100437.
  5. Bruhwiler, E. and Denarie, E. (2013), "Rehabilitation and strengthening of concrete structures using ultra-high performance fibre reinforced concrete", Struct. Eng. Int., 23(4), 450-457. https://doi.org/10.2749/101686613X13627347100437.
  6. Deng, P. and Matsumoto, T. (2017), "Weight function determinations for shear cracks in reinforced concrete beams based on finite element method", Eng. Fract. Mech., 177, 61-78. https://doi.org/10.1016/j.engfracmech.2017.03.046.
  7. Deng, P. and Matsumoto, T. (2018), "Determination of dominant degradation mechanisms of RC bridge deck slabs under cyclic moving loads", Int. J. Fatigue, 112, 328-340. https://doi.org/10.1016/j.ijfatigue.2018.03.033.
  8. Deng, P. R. and Matsumoto. (2019), "Fracture mechanics based fatigue life prediction method for RC slabs in a punching shear failure mode", J. Struct. Eng., in press. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002504.
  9. Drar, A. A. M. and Matsumoto, T. (2016), "Fatigue analysis of RC slabs reinforced with plain bars based on the bridging stress degradation concept", J. Adv. Concr. Technol., 14(1), 21-34. https://doi.org/10.3151/jact.14.21.
  10. Dugat, J., Roux, N. and Bernier, G. (1996), "Mechanical properties of reactive powder concretes", Mater. Struct., 29(4), 233-240. https://doi.org/10.1007/BF02485945.
  11. Japan Road Association. (2002), Steel bridge. Specification for Highway Bridges, Part III, Concrete Bridges, Maruzen, Tokyo, Japan.
  12. Japan Industrial Standard. (2004), "Steel bars for concrete reinforcement, JIS G-3112", JISC, Japan.
  13. Japan Industrial Standard. (2015), "Physical testing method of cement, JIS R-5201", JISC, Japan
  14. Japan Society of Civil Engineers. (2007), "Standard specifications for concrete structures-2007, design", JISC, Tokyo, Japan
  15. Graddy, J. C., Kim, J., Whitt, J. H., Burns, N. H. and Klingner, R. E. (2002), "Punching-shear behavior of bridge decks under fatigue loading", Strut. J., 99(3), 257-266.
  16. Habel, K., Denarie, E. and Bruhwiler, E. (2006), "Structural response of elements combining ultrahigh-performance fiber-reinforced concretes and reinforced concrete", J. Struct. Eng., 32(11), 1793-1800. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:11(1793).
  17. Khan, A. Q., Deng, P. and Matsumoto, T. (2018), "Development of an effective numerical model for fatigue analysis of RC bridge slabs", Proceeding of 10th Symposium on Decks of Highway Bridge, Tokyo, Japan.
  18. Li, V.C. (2002), "Large volume, high‐performance applications of fibers in civil engineering", J. Appl. Polym., 83(3), 660-686. https://doi.org/10.1002/app.2263.
  19. Li, V.C. and Matsumoto, T. (1998), "Fatigue crack growth analysis of fiber reinforced concrete with effect of interfacial bond degradation", Cement Concrete Comp., 20(5), 339-351. https://doi.org/10.1016/S0958-9465(98)00010-9.
  20. Kosaka, Y., Imai, T., Mitamura, H. and Matsui, S. (2015), "Development of ultra-high performance fiber reinforced cement composite for rehabilitation of bridge deck", International Conference on the Regeneration and Conservation of Concrete Structures, (RCCS), Nagasaki, Japan.
  21. Kobayashi, K., Kano, Y. and Rokugo, K. (2014), "Example of composite deterioration of RC slab caused by ASR and frost attack in mountainous cold area and its verification", J. Jap. Soc. Cv. Eng., Ser. E2 (Matl. Concr. Struct.), 70(3), 320-335.
  22. Kanda, T., Saito, T., Sakata, N. and Hiraishi, M. (2001), "Fundamental properties of directed sprayed retrofit material utilizing fiber reinforced pseudo strain hardening cementitious composites", Proceedings of Japan Concrete Institute, 23(1), 475-480.
  23. Matsui, S. (1987), "Fatigue strength of RC-slabs of highway bridge by wheel running machine and influence of water on fatigue", Proc., of Japan Concrete Institute, 9(2), 627-632.
  24. Ma, S. Y. A. and May, I. M. (1986), "The newton-raphson method used in the non-linear analysis of concrete structures", Comput. Struct., 24(2), 177-185. https://doi.org/10.1016/0045-7949(86)90277-4.
  25. Menengotto, M. (1973), "Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and nonelastic behavior of elements under combined normal force and bending", IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon, Portugal.
  26. Maekawa, K., Gebreyouhannes, E., Mishima, T. and An, X. (2006), "Three-dimensional fatigue simulation of RC slabs under traveling wheel-type loads", J. Adv. Concr. Technol., 4(3), 445-457. https://doi.org/10.3151/jact.4.445.
  27. Maeshima, T., Koda, Y., Iwaki, I., Naito, H., Kishira, R., Suzuki, Y. and Suzuki, M. (2016), "Influence of alkali silica reaction on fatigue resistance of RC bridge deck", J. Jap. Soc. Cv. Eng., Ser. E2 (Matl. Concr. Struct.), 72(2), 126-145.
  28. Matsumoto, T. and Li, V. C. (1999), "Fatigue life analysis of fiber reinforced concrete with a fracture mechanics based model", Cement Concrete Comp., 21(4), 249-261. https://doi.org/10.1016/S0958-9465(99)00004-9.
  29. Maeda, Y. and Matsui, S. (1984), "Punching shear load equation of reinforced concrete slabs", Doboku Gakkai Ronbunshu, 1984(348), 133-141. https://doi.org/10.2208/jscej.1984.348_133
  30. Maekawa, K., Okamura, H. and Pimanmas, A. (2014), "Non-linear mechanics of reinforced concrete", CRC Press, Florida, USA.
  31. Matsumoto, T., Suthiwarapirak, P. and Kanda, T. (2003), "Mechanisms of multiple cracking and fracture of DFRCC under fatigue flexure", J. Adv. Concr. Technol., 1(3), 299-306. https://doi.org/10.3151/jact.1.299.
  32. Mitamura, H., Satou, T., Honda, K. and Matsui, S. (2009), "Influence of frost damage on fatigue failure of RC deck slabs on road bridges", J. Struct. Eng., 55A, 1420-1431.
  33. Ono, T., Mitamura, H., Hayashikawa, T. and Matsui, S. (2009), "Study on durability improvement of reinforced concrete slabs in snowy cold region", J. Struct. Eng., 55A, 1432-1441.
  34. Perdikaris, P. C. and Beim, S. (1988), "RC bridge decks under pulsating and moving load", J. Struct. Eng., 114(3), 591-607. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:3(591).
  35. Rossi, P. (2005), "Development of new cement composite materials for construction", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 219(1), 67-74. https://doi.org/10.1243/146442005X10193
  36. Richard, P. and Cheyrezy, M. (1995), "Composition of reactive powder concretes", Cement. Concrete Res., 25(7), 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2.
  37. Shima, H. (1986), "Micro and macro models for bond behavior in reinforced concrete", Ph.D. Dissertation, The University of Tokyo.
  38. Schlafli, M. and Bruhwiler, E. (1998), "Fatigue of existing reinforced concrete bridge deck slabs", Eng. Struct., 20(11), 991-998. https://doi.org/10.1016/S0141-0296(97)00194-6.
  39. Shah, S. P. and Rangan, B.V. (1971), "Fiber reinforced concrete properties", J. Proc., 68(2), 126-137.
  40. Suthiwarapirak, P. and Matsumoto, T. (2006), "Fatigue analysis of RC slabs and repaired RC slabs based on crack bridging degradation concept", J. Struct. Eng., 132(6), 939-948. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:6(939).
  41. Salem, H. and Maekawa, K. (1999), "Spatially averaged tensile mechanics for cracked concrete and reinforcement under highly inelastic range", Doboku Gakkai Ronbunshu, 1999(613), 277-293. https://doi.org/10.2208/jscej.1999.613_277
  42. Safdar, M., Matsumoto, T. and Kakuma, K. (2016), "Flexural behavior of reinforced concrete beams repaired with ultra-high performance fiber reinforced concrete (UHPFRC)", Compos. Struct., 157, 448-460. https://doi.org/10.1016/j.compstruct.2016.09.010.
  43. Tanako, M., Abe, T., Kida, T., Kodama, T. and Komori, A. (2010), "Fatigue resistance of RC slab overlaid with the SFRC determined by a fatigue test under running wheel load", J. Struct. Eng., 56A, 1259-1269.
  44. Tayeh, B. A., Bakar, B. A., Johari, M. M. and Voo, Y. L. (2013), "Evaluation of bond strength between normal concrete substrate and ultra high performance fiber concrete as a repair material", Procedia Eng., 54, 554-563. https://doi.org/10.1016/j.proeng.2013.03.050
  45. Zhang, J., Stang, H. and Li, V.C. (1999), "Fatigue life prediction of fiber reinforced concrete under flexural load", Int. J. Fatigue, 21(10), 1033-1049. https://doi.org/10.1016/S0142-1123(99)00093-6.