Effect of Post-annealing Treatment on Copper Oxide based Heterojunction Solar Cells

산화물구리 기반 이종접합형 태양전지의 후열처리효과

  • Received : 2020.06.08
  • Accepted : 2020.06.20
  • Published : 2020.06.30

Abstract

Copper Oxide (CuO) films were deposited on the n-type silicon wafer by rf magnetron sputtering for heterojunction solar cells. And then the samples were treated as a function of the annealing temperature (300-600℃) in a vacuum. Their electrical, optical and structural properties of the fabricated heterojunction solar cells were then investigated and the power conversion efficiencies (PCE) of the fabricated p-type copper oxide/n-type Si heterojunction cells were measured using solar simulator. After being treated at temperature of 500℃, the solar cells with CuO film have PCE of 0.43%, Current density of 5.37mA/㎠, Fill Factor of 39.82%.

Keywords

References

  1. Lincot, D., "The new paradigm of photovoltaics: From powering satellites to powering humanity," C.R. Phys., Vol. 18, pp.381-390, 2017. https://doi.org/10.1016/j.crhy.2017.09.003
  2. Saidi, K. and Omri, A., "The impact of renewable energy on carbon emissions and economic growth in 15 major renewable energy-consuming countries" Environ. Res., Vol. 186, No. 109567, pp.1-11, 2020.
  3. Pareek, A., Dom, R., Gupta, J., Chandran, J., Adepu, V., and Borse, P. H., "Insights into renewable hydrogen energy Recent advances and prospects", Mater. Sci. Energy Technol. Vol. 3, pp. 319-327, 2020. https://doi.org/10.1016/j.mset.2019.12.002
  4. Lee, T. D. and Ebong, A. U., "A review of thin film solar cell technologies and challenges," Renewable Sustainable Energy Rev., Vol. 70, pp. 1289-1297, 2017.
  5. Renewables 2018 Global Status Report, http://www.ren21.net/gsr-2018/.
  6. Giannakopoulou, E., "The Power Transition-Trends and the Future", 3rd HAEE Conference, 2018.
  7. Nelson, J. "Polymer:fullerene bulk heterojunction solar cells," Mater. Today, Vol. 14, No. 10, pp. 452-470, 2011. https://doi.org/10.1016/S1369-7021(11)70210-3
  8. Acher, M.D., "Photovoltaics and photoelectrochemistry - similarities and differences," Phy. E, Vol. 14, pp. 61-64, 2002. https://doi.org/10.1016/S1386-9477(02)00450-2
  9. Olsen, L.C., Bohara, R.C., and Urie, M.W., "Explanation for low-efficiency $Cu_2O$ Schottky-barrier solar cells," Appl. Phys. Lett., Vol. 34, pp. 47-49, 1979. https://doi.org/10.1063/1.90593
  10. Ohta, H., Nomura, K., Hiramatsu, H., Ueda, K., Kamiya, T., Hirano, and Hosono, H., "Frontier of transparent oxide semiconductors," Solid-State Electron., Vol. 47, pp. 2261-2267, 2003. https://doi.org/10.1016/S0038-1101(03)00208-9
  11. Kim, K.H., "Fabrication and Properties of Silicon Solar cells using Al2O3/Si/Al2O3 Structures", J. of Semicond. Disp. Technol., Vol. 14, No.4, pp.45-49, 2015.
  12. Choi, J.-H., Roh, S.-C., and Seo, H., "A Study on the Application of Ag Nano-Dots Structure to Improve the Light Trapping Effect of Crystalline Silicon Solar Cell", Vol. 18, No.3, pp.19-24, 2019.
  13. Alajlani, Y., Placido, F., Chu, H.O., Bold, R.D., Fleming, L., and Gibson, D., "Characterisation of Cu2/CuO thin films produced by plasma-assisted DC sputtering for solar cell application," Thin Solid Films, Vol. 642, pp. 45-50, 2017. https://doi.org/10.1016/j.tsf.2017.09.023
  14. Jiang, C., Moniz, S.J.A, Wang, A., Zhang, T., and Tang, J. "Photoelectrochemical devices for solar water splitting-materials and challenges," Chem. Soc. Rev., 46, 4645-4660, 2017. https://doi.org/10.1039/C6CS00306K
  15. Narayan, M. R., and Singh, J., "Study of the mechanism and rate of exciton dissociation at the donor-acceptor interface in bulk-heterojunction organic solar cells," J. Appl. Phys., Vol. 114, pp. 073510/1-7, 2013.
  16. Bergmann, R. B., "Crystalline Si thin-film solar cells- a review," Appl. Phys. A, Vol. 69, pp. 187-194, 1999. https://doi.org/10.1007/s003390050989