NF3 / H2O 원거리 플라즈마 건식 세정에 의한 SiGe 표면 특성 변화

SiGe Surface Changes During Dry Cleaning with NF3 / H2O Plasma

  • 박세란 (연세대학교 신소재공학과) ;
  • 오훈정 (연세대학교 비아이티 마이크로 팹 연구소) ;
  • 김규동 ((주) ACN) ;
  • 고대홍 (연세대학교 신소재공학과)
  • Park, Seran (Department of Materials Science and Engineering, Yonsei University) ;
  • Oh, Hoon-Jung (BIT Micro Fab Research Center, Yonsei University) ;
  • Kim, Kyu-Dong (ACN Co. Ltd) ;
  • Ko, Dae-Hong (Department of Materials Science and Engineering, Yonsei University)
  • 투고 : 2020.06.03
  • 심사 : 2020.06.18
  • 발행 : 2020.06.30

초록

We investigated the Si1-xGex surface properties when dry cleaning the films using NF3 / H2O remote plasma. After the dry cleaning process, it was found that about 80-250 nm wide bumps were formed on the SiGe surface regardless of Ge concentration in the rage of x = 0.1 ~ 0.3. In addition, effects of the dry cleaning processing parameters such as pressure, substrate temperature, and H2O flow rates were examined. It was found that the surface bump is significantly dependent on the flow rate of H2O. Based on these observations, we would like to provide additional guidelines for implementing the dry cleaning process to SiGe materials.

키워드

참고문헌

  1. D.-H. Shin, et al, "Improvement in Capacitor Characteristics of Titanium Dioxide Film with Surface Plasma Treatment," Journal of the Semiconductor & Display Technology, Vol.18, No.1, pp. 32-37, 2019.
  2. W. Li, et al., "Vertical P-TFET With a P-Type SiGe Pocket", IEEE TRANSACTIONS ON ELECTRON DEVICES, VOL. 67, NO. 4, pp.1480-1484, 2020. https://doi.org/10.1109/ted.2020.2971475
  3. Z.-H. Li, et al., "Performance Improvement by Blanket Boron Implant in the Sigma-Shaped Trench Before the Embedded SiGe Source/Drain Formation for 28-nm PMOSFET", IEEE ELECTRON DEVICE LETTERS, VOL. 41, NO. 6, pp.796-799, 2020. https://doi.org/10.1109/led.2020.2985740
  4. B. M. Haugerud, et al., "Mechanically induced strain enhancement of metal oxide semiconductor field effect transistors", Journal of Applied Physics, Vol. 94, pp. 4102-4107, 2003. https://doi.org/10.1063/1.1602562
  5. Kah-Wee Ang, et al., "Beneath The Channel Strain Transfer Structure (STS) and Embedded Source/Drain Stressors for Strain and Performance Enhancement of Nanoscale MOSFETs", 2007 IEEE Symposium on VLSI Technology, pp. 42-43, 2007.
  6. M.L. Lee et al., "Strained Si, SiGe, and Ge channels for high-mobility metal-oxide-semiconductor field-effect transistors", Journal of Applied Physics, Vol. 97, 011101, 2004. https://doi.org/10.1063/1.1819976
  7. M.D.Giles, et al., "Understanding Stress Enhanced Performance in Intel 90nm CMOS Technology", 2004 Symposium on VLSI Technology Digest of Technical Papers, pp. 118-119, 2004.
  8. T. Tanaka, et al., "Mechanism of Resist Pattern Collapse during Development Process", Japanese Journal of Applied Physics, Vol. 32, pp. 6059-6064, 1993. https://doi.org/10.1143/JJAP.32.6059
  9. X. Xu, el al., "Wetting Challenges in Cleaning of High Aspect Ratio Nano-Structures", Solid State Phenomena, Vol.195, pp. 235-238, 2013. https://doi.org/10.4028/www.scientific.net/SSP.195.235
  10. J. Shoeb, et al., "Damage by radicals and photons during plasma cleaning of porous low-k SiOCH. I.Ar/$O_2$ and He/$H_2$ plasmas" Journal of Vacuum Science & Technology A, Vol. 30, 041303, 2012. https://doi.org/10.1116/1.4718444
  11. J.W. Park, et al., "In situ dry cleaning of Si wafer using $OF_2\;/\;NH_3 $remote plasma with low global warming potential", Journal of Physics D: Applied Physics, Vol. 51, 445201, 2018. https://doi.org/10.1088/1361-6463/aae182
  12. M.S. Lee, et al., "Removal of Interfacial Layer in HfO2 Gate Stack by Post-Gate Cleaning Using NF3/NH3 Dry Cleaning Technique", Solid State Phenomena, Vol. 219, pp. 11-15, 2015. https://doi.org/10.4028/www.scientific.net/SSP.219.11
  13. S. Park, et al., "SiGe surface morphogenesis during dry cleaning with NF3/H2O plasma", 2019 Electron Devices Technology and Manufacturing Conference (EDTM), pp. 348-350, 2019.
  14. H. Ogawa, et al., "Dry Cleaning Technology for Removal of Silicon Native Oxide Employing Hot $NH_3/NF_3$ Exposure", Japanes Journal of Applied Physics, Vol. 41, pp. 5349-5358, 2002. https://doi.org/10.1143/JJAP.41.5349
  15. S. Kang, et al., "Study on the Etching Selectivity of Oxide Films in Dry Cleaning Process with $NF_3$ and $H_2O$", Solid State Phenomena, Vol. 255, pp. 86-90, 2016. https://doi.org/10.4028/www.scientific.net/SSP.255.86