Steel and Composite Structures

  • 제36권1호
  • /
  • Pages.17-29
  • /
  • 2020
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic behavior of steel cabinets considering nonlinear connections and site-response effects

  • Tran, Thanh-Tuan (Institute of Offshore Wind Energy, Kunsan National University) ;
  • Nguyen, Phu-Cuong (Faculty of Civil Engineering, Ho Chi Minh City Open University) ;
  • So, Gihwan (Innose Tech Company) ;
  • Kim, Dookie (Department of Civil and Environmental Engineering, Kongju National University)
  • 투고 : 2019.04.26
  • 심사 : 2020.05.30
  • 발행 : 2020.07.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents experimental and numerical studies on the seismic responses of the steel cabinet facility considering the nonlinear behavior of connections and site-response effects. Three finite element (FE) models with differences of type and number of connections between steel plates and frame members have been developed to demonstrate adequately dynamic responses of structures. The screw connections with the bilinear force-deformation relationship are proposed to represent the inelastic behavior of the cabinet. The experiment is carried out to provide a verification with improved FE models. It shows that the natural frequencies of the cabinet are sensitive to the plate and frame connectors. The screw connections reduce the free vibration compared to the weld one, with decreased values of 2.82% and 4.87% corresponding to front-to-back and side-to-side directions. Additionally, the seismic responses are investigated for various geological configurations. Input time histories are generated so that their response spectrums are compatible with a required response spectrum via the time-domain spectral matching. The results indicate that both site effects and nonlinear behavior of connections affect greatly on the seismic response of structures.

키워드

과제정보

This work was supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (No. 20171510101960).

참고문헌

  1. Abrahamson, N.A. (1992), "Non-stationary spectral matching", Seismol. Res. Lett., 63(1), 30.
  2. AISI (2007), North American Standard for Cold-formed Steel Framing-General Provisions, S100-07, American Iron and Steel Institute, USA.
  3. Boore, D.M., Joyner, W.B. and Fumal, T.E. (1997), "Equations for estimating horizontal response spectra and peak acceleration from western North American earthquakes: A summary of recent work", Seismol. Res. Lett., 68(1), 128-153. https://doi.org/10.1785/gssrl.68.1.128.
  4. Cai, Y. and Young, B. (2019), "Experimental investigation of carbon steel and stainless steel bolted connections at different strain rates", Steel Compos. Struct., 30(6), 551-565. https://doi.org/10.12989/scs.2019.30.6.551.
  5. Cao, A.T., Tran, T.T., Nguyen, T.H.X. and Kim, D. (2020), "Simplified approach for seismic risk assessment of cabinet facility in nuclear power plants based on cumulative absolute velocity". Nuclear Technol., 206(5), 743-757. 10.1080/00295450.2019.1696643.
  6. Chiou, B.J. and Youngs, R.R. (2008), "An NGA model for the average horizontal component of peak ground motion and response spectra", Earthq. Spectra, 24(1), 173-215. https://doi.org/10.1193/1.2894832
  7. Cho, S.G., Kim, D. and Chaudhary, S. (2011), "A simplified model for nonlinear seismic response analysis of equipment cabinets in nuclear power plants", Nuclear Eng. Design, 241(8), 2750-2757. https://doi.org/10.1016/j.nucengdes.2011.06.026
  8. Choi, Y. and Stewart, J.P. (2005), "Nonlinear site amplification as function of 30 m shear wave velocity", Earthq. Spectra, 21(1), 1-30. https://doi.org/10.1193/1.1856535.
  9. Cvetanovska, J., Sesov, V., Gjorgiev, I. and Edip, K. (2012)," The role of local site conditions in the seismic assessment of historical monuments", Proceedings of the 15th World Conference on Earthquake Engineering 2012 (15WCEE), Portugal.
  10. Fatahi, B., Tabatabaiefar, H.R. and Samali, B. (2014), "Soil-structure interaction vs Site effect for seismic design of tall buildings on soft soil", Geomech. Eng., 6(3), 293-320. https://doi.org/10.12989/gae.2014.6.3.293.
  11. Goodno, B.J., Gould, N.C., Caldwell, P. and Gould, P.L. (2011), "Effects of the January 2010 Haitian earthquake on selected electrical equipment", Earthq. Spectra, 27(1), 251-276. https://doi.org/10.1193/1.3636415.
  12. Gorgun, H. (2018), "An experimental study of the behaviour of double sided bolted billet connections in precast concrete frames", Steel Compos. Struct., 29(5), 603-622. https://doi.org/10.12989/scs.2018.29.5.603.
  13. Hashash, Y.M., Groholski, D.R., Phillips, C.A., Park, D. and Musgrove, M. (2012), "DEEPSOIL 5.1. User Manual and Tutorial, 107".
  14. Hokmabadi, A.S., Fatahi, B. and Samali, B. (2014), "Assessment of soil-pile-structure interaction influencing seismic response of mid-rise buildings sitting on floating pile foundations", Comput. Geotechnics, 55, 172-186. https://doi.org/10.1016/j.compgeo.2013.08.011.
  15. Idriss, I.M. and Sun, J.I. (1992), "A Computer program for conducting equivalent linear seismic response analysis of horizontally layered soil deposits. Users manual for SHAKE91".
  16. IEEE Standard 693 (2005), IEEE Recommended Practice for Seismic Design of Substations, The Institute of Electrical and Electronics Engineers, IEEE.
  17. Kobayashi, H., Seo, K. and Midorikawa, S. (1986), "Estimated strong ground motions in the Mexico City earthquake: the Mexico earthquakes 1985, factors involved and lessons learned". New York: American Society of Civil Engineers.
  18. Kottke, A.R. and Rathje, E.M. (2008), "Technical manual for Strata", University of California, Berkeley.
  19. Lilhanand, K. and Tseng, W.S. (1988), "Development and application of realistic earthquake time histories compatible with multiple-damping design spectra", Proceedings of the 9th world conference on earthquake engineering, August.
  20. Llambias, J.M., Sevant, C.J. and Shepherd, D.J. (1989), "Nonlinear response of electrical cubicles for fragility estimation", Transactions of the 10th international conference on structural mechanics in reactor technology, Los Angeles, CA (USA).
  21. Nguyen, P.C. and Kim, S.E. (2013), "Nonlinear elastic dynamic analysis of space steel frames with semi-rigid connections", J. Constr. Steel Res., 84, 72-81. https://doi.org/10.1016/j.jcsr.2013.02.004.
  22. Nguyen, P.C. and Kim, S.E. (2016), "Advanced analysis for planar steel frames with semi-rigid connections using plastic-zone method", Steel Compos. Struct., 21(5), 1121-1144. https://doi.org/10.12989/scs.2016.21.5.1121.
  23. Nguyen, P.C. and Kim, S.E. (2017), "Investigating effects of various base restraints on the nonlinear inelastic static and seismic responses of steel frames", Int. J. Nonlinear Mech., 89, 151-167. https://doi.org/10.1016/j.ijnonlinmec.2016.12.011.
  24. Nguyen, P.C. and Kim, S.E. (2018), "A new improved fiber plastic hinge method accounting for lateral-torsional buckling of 3D steel frames", Thin-Wall. Struct., 127, 666-675. https://doi.org/10.1016/j.tws.2017.12.031.
  25. Nguyen, P.C., Doan, N.T.N., Ngo-Huu, C. and Kim, S.E. (2014), "Nonlinear inelastic response history analysis of steel frame structures using plastic-zone method", Thin-Wall. Struct., 85, 220-233. https://doi.org/10.1016/j.tws.2014.09.002.
  26. Pekoz, T. (1990), "Design of cold-formed steel screw connections", Proceedings of the 10th International Specialty Conference on Cold-formed Steel Structures, St Louis, Missouri, U.S.A., October 23-24.
  27. Pham, H.S. and Moen, C.D. (2015), "Stiffness and Strength of Single Shear Cold-Formed Steel Screw-Fastened Connections" Report No. CE/VPI-ST-15-07; Virginia Polytechnic Institute and State University.
  28. Psarropoulos, P.N. (2009), "Local site effects and seismic response of bridges". In Coupled Site and Soil-Structure Interaction Effects with Application to Seismic Risk Mitigation (pp. 77-88). Springer, Dordrecht.
  29. Rashad, M., Wahab, M. and Yang, T.Y. (2019), "Experimental and numerical investigation of RC sandwich panels with helical springs under free air blast loads", Steel Compos. Struct., 30(3), 217-230. https://doi.org/10.12989/scs.2019.30.3.217.
  30. Rustogi, S. and Gupta, A. (2004), Modeling the dynamic behavior of electrical cabinets and control panels: experimental and analytical results", J. Struct. Eng., 130(3), 511-519. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(511).
  31. Ryan, T., Broderick, B.M., Hunt, A., Goggins, J. and Salawdeh, S. (2017), "Recommendations for numerical modelling of concentrically braced steel frames with gusset plate connections subjected to earthquake ground motion", J. Struct. Integrity Maint., 2(3), 168-180. https://doi.org/10.1080/24705314.2017.1354154.
  32. Salman, K., Tran, T.T. and Kim, D. (2019), "Grouping effect on the seismic response of cabinet facility considering primary-secondary structure interaction". Nuclear Eng. Technol., 52(6), 1318-1326. https://doi.org/10.1016/j.net.2019.11.024.
  33. Salman, K., Tran, T.T. and Kim, D. (2020), "Seismic capacity evaluation of NPP electrical cabinet facility considering grouping effects", J. Nuclear Sci. Technol., 1-13. 10.1080/00223131.2020.1724206.
  34. Schnabel, P.B. (1972), "SHAKE: A computer program for earthquake response analysis of horizontally layered sites", EERC Report 72-12; University of California, Berkeley.
  35. Seed, H.B. (1970), "Soil moduli and damping factors for dynamic response analysis", Technical Report 197109; Earthquake Engineering Research Center.
  36. Stafford, J.R. (1975), "Finite element predictions of the dynamic response of power plant control cabinets". In Structural Design of Nuclear Plant Facilities (pp. 266-280), New York, USA, December.
  37. Thomas, J. and Sandeep, T.N. (2018), "Experimental study on circular CFST short columns with intermittently welded stiffeners", Steel Compos. Struct., 29(5), 659-667. https://doi.org/10.12989/scs.2018.29.5.659.
  38. Tran, T.T. and Kim, D. (2019), "Uncertainty quantification for nonlinear seismic analysis of cabinet facility in nuclear power plants". Nuclear Eng. Design, 355, 110309. https://doi.org/10.1016/j.nucengdes.2019.110309
  39. Tran, T.T., Han, S.R. and Kim, D. (2018), "Effect of probabilistic variation in soil properties and profile of site response', Soils Foundations, 58(6), 1339-1349. https://doi.org/10.1016/j.sandf.2018.07.006.
  40. Tran, T.T., Nguyen, P.C., Han, S.R. and Kim, D. (2020a), "Stochastic Site Response Analysis in Consideration with Various Probability Distributions of Geotechnical Properties", In CIGOS 2019, Innovation for Sustainable Infrastructure (pp. 901-906), Ha Noi, Viet Nam.
  41. Tran, T.T., Salman, K., Han, S.R. and Kim, D. (2020b), "Probabilistic models for uncertainty quantification of soil properties on site response analysis", ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 10.1061/AJRUA6.0001079. (in press)
  42. Tyapin, A.G. (2016), "Damping in the platform models for soil-structure interaction problems: Rayleigh damping options and limitations in modal analysis", J. Struct. Integrity Maint., 1(3), 114-123. https://doi.org/10.1080/24705314.2016.1211237.
  43. Vucetic, M. and Dobry, R. (1991), "Effect of soil plasticity on cyclic response", J. Geotech. Eng., 117(1), 89-107. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:1(89).
  44. Zeynalian, M., Shelley, A. and Ronagh, H.R. (2016), "An experimental study into the capacity of cold-formed steel truss connections", J. Constr. Steel Res., 127, 176-186. https://doi.org/10.1016/j.jcsr.2016.08.001.
  45. Zwick, K. and LaBoube, R.A. (2002), "Self-drilling screw connections subject to combined shear and tension", Research Report RP02-4; American Iron and Steel Institute.