참고문헌
- H.-J. Lee and M.-S. Kim, Behavior of the Surface Precipitation of Manganese Oxides during Hot-dip Galvanizing, J. Korean Inst. Surf. Eng., 48(1) (2015) 27-32. https://doi.org/10.5695/JKISE.2015.48.1.027
- M.-H. Hong, G.-S. Hwang, and J.-H. Chung, Surface Treatment: Microstructure of Surface Defects Observed on Continuous Hot - dip Galvanized and Galvannealed Coating Steels, J. Kor. Inst. Met. & Mater., 40(1) (2002) 83-92.
- T.-S. Shin, Cost Comparisons between the Hot-dip Galvanizing and the Paintion for Structural Steel, Journal of the Architectural and urban Institute, 1 (2002) 93-100.
-
Adachi Hirohiko, Tsukada Masaru and Satoko Chikatoshi, Discrete Variational
$X{\alpha}$ Cluster Calculations. I. Application to Metal Clusters, Journal of the Physical Society of Japan, 45(3) (1978) 875-883. https://doi.org/10.1143/JPSJ.45.875 - C.-D. Lee, S.-S. Choi, C.-S. Kang and K.-S. Shin, Effects of Solidification Rate on Microstructure and Mechanical Properties of AZ91D Magnesium Alloy, Korean journal of metals and materials, 38(9) (2000) 1225-1232.
- M. M. Avedesian and H. Baker, ASM International, Materials Park OH, (1999) 7.
- Seifert K, Hafner J, Furthmuller J and Kresse G, The influence of generalized gradient corrections to the LDA on predictions of structural phase stability: the Peierls distortion in As and Sb., Journal of physics, an Institute of Physics journal. Condensed matter. 7(19) (1995) 3683-3692. https://doi.org/10.1088/0953-8984/7/19/002
- J. Furthmuller, P. Kackell, F. Bechstedt, and G. Kresse, Extreme softening of Vanderbilt pseudopotentials: General rules and case studies of first-row and d-electron elements, Physical review. B, Condensed matter and materials physics, 61(7) (2000) 4576-4587. https://doi.org/10.1103/PhysRevB.61.4576
- R. Ninomiya, H. Yukawa, M. Morinaga and K. Kubota, An electronic approach to the prediction of the mechanical properties of magnesium alloys Journal of Alloys and Compounds, 215(1/2) (1994) 315-323. https://doi.org/10.1016/0925-8388(94)90860-5
- Allred, A. L, Electronegativity values from thermochemical data, Journal of inorganic and nuclear chemistry, 17(3/4) (1961) 215-221. https://doi.org/10.1016/0022-1902(61)80142-5
- U.-T. Jeon and Y.-S. Park, A study on the effects of N, Mo and Ni additions on the characteristics of passive film and the improvement of corrosion resistance of Fe-Cr martensitic stainless steel, The Korean Institute of Surface Engineering, 1997, 5 (1997) 61-62.
- J.-H. Lee, S.-K. Hwang, M.-H. Kim, S.-I. Kwun, Improvement of Zr-base Alloy for Nuclear Reactor Core Materials Application by Mo Addition, Korean journal of metals and materials, 38(6) (2000) 745-751.
- M. Morinaga and S. Kamado, An electronic approach to the prediction of the mechanical properties of aluminium alloys, Modelling and simulation in materials science and engineering, 1(2) (1993) 151-164. https://doi.org/10.1088/0965-0393/1/2/004
-
M.-S. Baek, D.-J. Yoon and B.-I. Kim, A Study on the Properties of Design for the Biomaterial Ti-Ag-Zr Alloys Using DV-X
${\alpha}$ Molecular Orbital Method, Korean journal of materials research., 24(4) (2014) 175-179. https://doi.org/10.3740/MRSK.2014.24.4.175 - M.-S. Baek, B.-S. Kang, K.-C. Baek, B.-I. Kim and D.-J. Yoon, Design of Nickel Alloys Using the Theoretical Values Calculated from the Electronic State Energies, Korean journal of materials research., 25(11) (2015) 642-646. https://doi.org/10.3740/MRSK.2015.25.11.642
- D.-S. Bae and S.-B. Won, Effects of Si Addition on Grain Size Refinement in Ferrite-Martensite Duplex Steels, Korean Journal of Metals and Materials, 25(10) (1987) 675-686.
- S.-M. Lee and C.-Y. Kang, Effect of Microstructure on the Damping Capacity of 12Cr Martensitic Heat-resisting Steel, Journal of the Korean Society for Power System Engineering, 14(2) (2010) 78-83.
- C.-H. Lee, Effect of Microstructures on Cleavage Fracture Strength in Bainitic and Martensitic Steels, Journal of the Korean Society for Heat Treatment, 27(3) (2014) 133-140. https://doi.org/10.12656/jksht.2014.27.3.133
- M.-G. Kim and J.-K. Ji, Effects of the Type of Martensite on Fatigue Limit of Ferrite-Martensitic Steel, Journal of industrial technology, 20(B) (2000) 87-94.
- K.-T. Oh, H.-M. Sim, C.-J. Hwang, K.-N. Kim, Propertise of TiAg alloy for dental application, J.Korean Soc. Dent. Mater, 29(3) (2002) 221.
- Fontana, Mars Guy., Corrosion Engineering, p.576, McGraw-Hill Book Company, (1987) 59-65.
- J.-H. Han, K.-H. Lee, M.-C. Shin, Corrosio Characteristics of Titaniym Alloys for Medical Implant, Analytical sci. Technol.. 9(2) (1996) 192.