DOI QR코드

DOI QR Code

원격 측정 시스템 동시계측 성능시험 방법 제안

A Proposal of Simultaneous Acquisition Performance Test Method for Telemetry System

  • 박유광 (단암시스템즈(주) 기술연구소) ;
  • 이운문 (단암시스템즈(주) 기술연구소) ;
  • 김복기 (단암시스템즈(주) 기술연구소)
  • 투고 : 2020.04.27
  • 심사 : 2020.06.11
  • 발행 : 2020.06.30

초록

원격 측정 시스템의 신뢰성을 향상시키기 위해 실시간성을 보장하는 통신 방법 및 동기화된 여러 채널을 통한 일괄적인 계측을 수행하는 다양한 방법이 존재한다. 이러한 동기화된 시스템은 채널들의 동시계측 성능을 확인하기 위한 검증이 필요하다. 본 논문에서는 동시계측 성능 시험을 통해 원격 측정 시스템에서의 동기화된 채널 간 계측 시간의 차이를 측정하는 방법을 제안한다. 측정을 위해 모사 신호를 인가하고 채널의 샘플링 주기와 모사 신호의 주기의 차이를 시간 해상도라는 개념으로 정의하였다. 시간 해상도를 통해 채널 간의 계측 시차를 확인할 수 있는 원리를 설명한다. 또한 계측 시차가 발생할 수 있는 상황에서의 시뮬레이션을 통해 제안한 방법에 대한 검증을 진행하였다. 그리고 실제 원격 측정 시스템 내의 계측 시차를 식별하기 위한 절차가 기술된다.

There are communication methods that guarantees real-time and method of performing the simultaneous acquisition through the synchronized multi-channels to improve the reliability of the telemetry system. Such synchronized systems need to be verified to confirm the simultaneous measurement performance of channels. In this paper, we propose a method to measure the time difference between synchronized channels in a telemetry system through simultaneous acquisition performance test. The simulation signal is applied for measurement and the difference between the sampling period and the simulation signal period is defined as the concept of time resolution. The principle of checking the measurement time difference between channels through time resolution was explained. In addition, the proposed principle was verified through simulation in the situation when measurement time difference may occur. And a procedure for identifying a measurement time difference in an actual telemetry system is described.

키워드

참고문헌

  1. Y. Artyukh, I. Bilinskis, K. Sudars, and V. Vedin, "Multi-channel data acquisition from sensor systems," in Proceeding of the 10th International Conference "Digital Signal Processing and its Applications", Moscow: Russia, Vol. X-1, pp. 117-119, Mar 2008.
  2. Y. Lan, Y. Zhaoming, J. Jing, Z. Delin and T. Changwen, "A high-speed multi-channel data acquisition and processing system for coherent radar," in Proceeding of the Fourth International Conference on Signal Processing, Beijing: China, Vol. 2, pp. 1632-1635, Oct 1998.
  3. M. Meurer and R. Raulefs, "Enhancement of multichannel A/D conversion by a code division multiplex approach," in Proceeding of 2000 IEEE Sixth International Symposium on Spread Spectrum Techniques and Applications, Parsippany: NJ, Vol. 2, pp. 641-646, Sept 2000.
  4. S. Folea, M. Neagu, G. Mois and L. Miclea, "Multi-purpose sensor platform development," in Proceeding of 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, Cluj-Napoca: Romania, pp. 341-346, May 2012.
  5. M. George, Akash J B, A. Hussain and S. P. Sreelal, "A compact multichannel data acquisition and processing system for IoT applications," in Proceeding of 2015 International Conference on Advances in Computing, Communications and Informatics, Kochi: India, pp. 1263-1267, Aug 2015.
  6. M. Abdallah, O. Elkeelany, "Simultaneous multi-channel data acquisition and storing system," in Proceeding of International Conference on Computing, Engineering and Information, Fullerton: CA, pp. 233-236, Nov 2009.
  7. C. Rajasekaran, R. Jeyabharath and P. Veena, “FPGA SoC based multichannel data acquisition system with network control module,” Journal of Circuits and Systems, Vol. 8, No. 2, pp. 53-75, 2017. https://doi.org/10.4236/cs.2017.82004
  8. P. Chauhan, K. Jasani, D. Israni, A. Makwana, "Hardware design of an efficient high speed multi channel data acquisition using DDR," in Proceeding of 2nd International Conference for Convergence in Technology, Mumbai: India, pp. 265-270, April 2017.
  9. Grim, T. Evan, "Achieving high-accuracy time distribution in network-centric data acquisition and telemetry system with IEEE 1588," in Proceeding of International Telemetering Conference, San Diego: CA, Vol. 42, pp. 696-706, Oct 2006.
  10. T. Feng et al., "The implementation of distributed high-speed high-accuracy data acquisition system based on EtherCAT," in Proceeding of 2013 IEEE 8th Conference on Industrial Electronics and Applications, Melbourne: Australia, pp. 1649-1653, June 2013.