References
- KOSHA, "Status of industrial accidents in 2019", pp. 22, April. 2020.
- Korean Association of Occupational Environmental Medicine, "A Study on the Actual Condition of Occupational Medical Use from Accident Occurrence of Musculoskeletal Diseases", pp. 2, Ministry of Employment and Labor, Feb, 2017.
- KOSHA, "Guidelines for investigating hazards of musculoskeletal burden work", pp. 28-31, Dec, 2018
- "Introduction of musculoskeletal disease prevention business", KOSHA, accessed Jun 10, 2020, http://www.kosha.or.kr/kosha/business/musculoskeletal_a_c.do
- K. T. Kim, "Development of an Apparatus to Measure Musculoskeletal Load for Construction Workers Using Accelerometers", JOURNAL OF THE ARCHITECTURAL INSTITUTE OF KOREA Structure & Construction 28(1), pp. 167-174, Jan, 2012. https://doi.org/10.5659/JAIK_SC.2012.28.1.167
- H. H. Kim, "Development of motion analysis device using inertial measurement device and trend of neck joint research", The Institute of Electronics and Information Engineers, The Magazine of the IEEE 43(12), pp. 57-64, Dec, 2016.
- J. H. Lim, J. H. Shim, H. Y. Jung, "IMU/UWB Sensor Fusion Using Moving Average Filter for Indoor Positioning of Mobile Robot", Journal of Institute of Control, Robotics and Systems 26(4), pp. 242-248, April, 2020. https://doi.org/10.5302/J.ICROS.2020.20.0019
- W. C. Jung, J. K. Lee, "IMU-based Position Estimation of Lower Limbs via a Combination of Kinematic Modeling with Minimal Utilization of Magnetometers", Journal of Institute of Control, Robotics and Systems 26(4), pp. 222-233, April, 2020. https://doi.org/10.5302/J.ICROS.2020.20.0006
- J. B. Ko, J. S. Yoon, C. K. Lee, T. M. Byeon, J. S. Hong, "A Study on the Determining the Optimal Location of IMU Sensors in Dynamic Balance Measurement by Comparing Absolute Percentage Error between the 3D Motion Capture System and IMU Sensor", Journal of the Ergonomics Society of Korea 38(6), pp. 419-434, Dec, 2019. https://doi.org/10.5143/JESK.2019.38.6.419
- J. K. Lee and E. J. Park, "Minimum-order Kalman filter with vector selector for accurate estimation of human body orientation," IEEE Transactions on Robotics, vol. 25, no. 5, pp. 1196-1201, Oct, 2009. https://doi.org/10.1109/TRO.2009.2017146
- G. Ligorio and A. M. Sabatini, "A novel Kalman filter for human motion tracking with an inertial-based dynamic inclinometer," IEEE Transactions on Biomedical Engineering, vol. 62, no. 8, pp. 2033-2043, 2015. https://doi.org/10.1109/TBME.2015.2411431
- M. S. Kim, S. K. Park, "Golf Swing Phase Estimation Using Single IMU Located on Different Body Parts", The Korean Society of Mechanical Engineers, pp. 1701-1702, Nov, 2019.
- S. J. Park, J. K. Park, J. H Choe," Development of a 2D Posture Measurement System to Evaluate Musculoskeletal Workload", Journal of the Ergonomics Society of Korea 24(3), pp. 43-52, Aug , 2005.
- J. H. Jo, J. N. Kim, J. J. Kim, W. S. Chong, "Development of real-time posture analysis monitoring system by measurement of knee joint angle in ADL", The HCI Society of Korea, pp. 643-646, Jan, 2018.
- Department of Labor, "Hazardous factors investigation method of musculoskeletal burden work", KOSHA, pp. 11-17, 2010.
- K. Y. Pyo, D. M. Lee, H. H. Cho, K. I. Kang, "Development of Measurement Method of Musculoskeletal Load for Construction Workers using Wearable Motion Recognition Sensor", Korea Institute of Building Construction, pp. 123-124, May, 2019.
- McAtamney, L., Corlett, E. N., RULA: a survey method for the investigation of work- related upper limb disorders, Applied Ergonomics, 24(2), 91-99, 1993. https://doi.org/10.1016/0003-6870(93)90080-S
- Kilbom, A., Assessment of physical exposure in relation to work-related musculos- keletal disorders - What information can be obtained from systematic observation?, Scandinavian Journal of Work, Environment & Health, 20, 30-45, 1994.
- H. S. Park, Y. K. Lee, S. H. Yim, "Prevention of the Musculoskeletal Disorders at Upper or Lower Extremities", Journal of the Ergonomics Society of Korea 29(4), pp. 455-463, Aug. 2010. https://doi.org/10.5143/JESK.2010.29.4.455