한국ITS학회 논문지 (The Journal of The Korea Institute of Intelligent Transport Systems)

  • 제19권3호
  • /
  • Pages.137-147
  • /
  • 2020
  • /
  • 1738-0774(pISSN)
  • /
  • 2384-1729(eISSN)
한국ITS학회 (The Korea Institute of Intelligent Transport Systems)
권호 표지
DOI QR코드

DOI QR Code

5G 주파수 대역의 자동차 전장품 전자기파 내성 평가를 위한 3 ~ 5 GHz 광대역 특성의 인쇄형 bow-tie 안테나 개발

Development of Printed Bow-tie Antenna with 3 ~ 5 GHz Broadband Characteristics for Testing the Electromagnetic Immunity of Automotive Electrical Components in the 5G Frequency Band

  • 고호진 (한국자동차연구원 전자기파연구센터) ;
  • 최범진 (한국자동차연구원 전자기파연구센터) ;
  • 박기훈 (한국자동차연구원 전자기파연구센터) ;
  • 우종명 (충남대학교 전자전파정보통신공학과)
  • Ko, Ho-jin (Dept. of EMI/EMC R&D Center, Korea Automotive Technology Institute (KATECH)) ;
  • Choi, Beom-jin (Dept. of EMI/EMC R&D Center, Korea Automotive Technology Institute (KATECH)) ;
  • Park, Ki-hun (Dept. of EMI/EMC R&D Center, Korea Automotive Technology Institute (KATECH)) ;
  • Woo, Jong-myung (Dept. of Radio Science and Engineering, Univ. of Chungnam National)
  • 투고 : 2020.04.21
  • 심사 : 2020.05.26
  • 발행 : 2020.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 5G 이동통신 주파수 대역에서 자동차 전장품 전자기파 내성 평가를 위한 3 ~ 5 GHz 광대역 특성의 인쇄형 bow-tie 안테나를 제안하였다. 제안된 안테나는 2.75 ~ 6 GHz 주파수 대역에서 -10 dB 대역폭을 만족하였고, 공진 주파수 대역에서 S11 특성이 -16.2 dB 이하의 특성을 보이면서 방사 패턴은 broadside한 형태를 얻었다. 또한, 실제 5G 이동통신 주파수 대역에서의 전자기파 내성 평가를 수행함에 있어서도, 국제 표준에서 규제하는 VSWR 특성이 2.1 이하의 특성을 유지하면서도 기준 레벨인 1 W의 레벨을 문제없이 형성하였다. 이러한 결과를 통하여, 제안된 안테나는 5G 이동통신 주파수 대역에서 전자기파 내성 검증을 위한 평가용 안테나로 적용할 수 있음을 확인하였다.

This paper proposes printed bow-tie antennas with 3 ~ 5 GHz broadband characteristics were proposed for testing the electromagnetic immunity of automotive electrical components in the 5G frequency band. The antenna get -10 dB bandwidth in the 2.75 ~ 6 GHz frequency band and the broadside radiation pattern with S11 characteristic of -16.2 dB at resonant frequency. In testing electromagnetic immunity in the 5G mobile communication frequency band, the VSWR characteristic remained below 2.1, forming a level of 1 W as proposed by international standards. As a result, it is confirmed that the proposed antenna can be applied to antenna testing for electromagnetic immunity verification in the 5G mobile communication frequency band.

키워드

참고문헌

  1. Balanis C. A.(2005), Antenna Theory-Analysis and Design, John Willey & Sons Inc(New Jersey, USA), p.934.
  2. Frazier R. K.(2015a), "Impact of Mismatch Loss on Mobile Phone Simulation for Automotive Testing," 2015 IEEE Symposium on Electromagnetic Compatibility and Signal Integrity, p.1.
  3. Frazier R. K.(2015b), "Impact of Mismatch Loss on Mobile Phone Simulation for Automotive Testing," 2015 IEEE Symposium on Electromagnetic Compatibility and Signal Integrity, pp.1-5.
  4. Future Automotive Research Association, https://www.samsungsds.com/global/ko/support/insights/car_it_1.html, 2018.05.08.
  5. International Organization for Standardization(ISO)(2012a), Road vehicles-Component test method for electrical disturbances from narrowband radiated electromagnetic energy-Part 9: Portable transmitters, pp.1-54.
  6. International Organization for Standardization(ISO)(2012b), Road vehicles-Component test method for electrical disturbances from narrowband radiated electromagnetic energy-Part 9: Portable transmitters, pp.13-16.
  7. International Organization for Standardization(ISO)(2012c), Road vehicles-Component test method for electrical disturbances from narrowband radiated electromagnetic energy-Part 9: Portable transmitters, p.3
  8. International Organization for Standardization(ISO)(2012d), Road vehicles-Component test method for electrical disturbances from narrowband radiated electromagnetic energy-Part 9: Portable transmitters, pp.11-12.
  9. International Organization for Standardization(ISO)(2019), Road vehicles-Component test method for electrical disturbances from narrowband radiated electromagnetic energy-Part 2: Absorber-lined shielded enclosure, pp.1-44.