Structural Engineering and Mechanics

  • 제74권6호
  • /
  • Pages.771-787
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Uncertainties in blast simulations evaluated with Smoothed Particle Hydrodynamics method

  • Husek, Martin (Institute of Structural Mechanics, Faculty of Civil Engineering, Brno University of Technology) ;
  • Kala, Jiri (Institute of Structural Mechanics, Faculty of Civil Engineering, Brno University of Technology)
  • 투고 : 2019.11.18
  • 심사 : 2020.01.31
  • 발행 : 2020.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The paper provides an inside look into experimental measurements, followed by numerical simulations and their related uncertainties. The goal of the paper is to present findings related to blast loading and the handling of defects that are inherent in experiments. Very often it might seem that experiments are simplified reflections of real-life conditions. In most cases this is true, but there is a good reason for that. The more complex an experiment is, the larger the amount of uncertainties that can be expected. This especially applies when the blast loading of concrete is the subject of research. When simulations fail to reproduce the results of experimental measurements, it does not necessarily mean there is something wrong with the numerical model. The problem could be missing information. Put differently, the numerical simulation may lack information that seemed irrelevant with regard to the experiment. In the presented case, a reference simulation with a proven material model unexpectedly failed to replicate the results of an experiment where concrete slabs were exposed to blast loading. This resulted in a search for possible unknowns. When all of the uncertainties were examined, the missing information turned out to be the orientation of the charge to the concrete slab. Since the experiment was burdened with error, a sensitivity study had to take place so the influence of this factor could be better understood. The findings point to the fact that even the smallest defect during experiments must somehow be taken into account when designing numerical simulations. Otherwise, the simulations are not correlated to the experiments, but merely to some expectations.

키워드

과제정보

This outcome has been achieved with financial support from the project GACR 17-23578S "Damage assessment identification for reinforced concrete subjected to extreme loading" provided by the Czech Science Foundation.

참고문헌

  1. Baker, E.L. (1991), "An explosives products thermodynamic equation of state appropriate for material acceleration and overdriven detonation: Theoretical background and formulation", Technical Report ARAED-TR-91013; U.S. Army Armament Research, Development and Engineering Center, USA.
  2. Barsotti, M.A. (2012), "Modeling mine blast with SPH", Proceedings of the 12th International LS-DYNA Users Conference, Detroit, USA, June.
  3. Barsotti, M., Sammarco, E. and Stevens, D. (2016), "Comparison of strategies for landmine modeling in LS-DYNA with sandy soil material model development", Proceedings of the 14th International LS-DYNA Users Conference, Detroit, USA, June.
  4. Benz, W. (1989), "Smoothed particle hydrodynamics: A review", NATO Workshop NATO Workshop, Les Arcs, France.
  5. Codina, R., Ambrosini D. and Borbon, F. (2016), "Experimental and numerical study of a RC member under a close-in blast", Eng. Struct., 127, 145-158. https://doi.org/10.1016/j.engstruct.2016.08.035.
  6. Colagrossi, A. and Landrini, M. (2003), "Numerical simulation of interfacial flows by smoothed particle hydrodynamics", J. Comput. Phys., 191(2), 448-475. https://doi.org/10.1016/S0021-9991(03)00324-3.
  7. Dynardo (2019), Methods for Multi-Disciplinary Optimization and Robustness Analysis, Dynardo GmbH, Weimar, Germany.
  8. Gomez-Gesteira, M., Rogers, B.D., Dalrymple, R. and Crespo, A.J.C. (2010), "State-of-the-art of classical SPH for free-surface flows", J. Hydraulic Res., 48, 6-27. https://doi.org/10.1080/00221686.2010.9641242.
  9. Gonzalez, A. (2010), "Measurement of areas on a sphere using fibonacci and latitude-longitude lattices", Math. Geosci., 42, 49-64. https://doi.org/10.1007/s11004-009-9257-x.
  10. Han-Gul, G. and Hyo-Gyoung, K. (2017), "A tensile criterion to minimize FE mesh-dependency in concrete beams under blast loading", Comput. Concrete, 20(1), 1-10. https://doi.org/10.12989/cac.2017.20.1.001.
  11. Hilding, D. (2016), "Methods for modelling air blast on structures in LS-DYNA", Proceedings of the Nordic LS-DYNA Users' Conference, Gothenburg, Sweden, June.
  12. Husek, M. and Kala J. (2016), "Improved element erosion function for concrete-like materials with the SPH method", Shock Vib., 2016, 1-13. http://dx.doi.org/10.1155/2016/4593749.
  13. Husek, M., Kala, J., Kral, P. and Hokes, F. (2016), "Concept and numerical simulations of a reactive anti-fragment armour layer", Proceedings of the 14th International Conference of Numerical Analysis and Applied Mathematics, Rhodes, Greece, September.
  14. Husek, M. and Kala, J. (2018), "Material structure generation of concrete and its further usage in numerical simulations", Struct. Eng. Mech., 68(3), 335-344. https://doi.org/10.12989/sem.2018.68.3.335.
  15. Chen, J.Y and Lien, F.S. (2018), "Simulations for soil explosion and its effects on structures using SPH method", J. Impact Eng., 112, 41-51. https://doi.org/10.1016/j.ijimpeng.2017.10.008.
  16. Jin-Won, N., In-Seok Y. and Seong-Tae Y. (2016), "Numerical evaluation of FRP composite retrofitted reinforced concrete wall subjected to blast load", Comput. Concrete, 17(2), 215-225. https://doi.org/10.12989/cac.2016.17.2.215.
  17. Jin, M., Haoa, Y. and Haoc, H. (2019), "Numerical study of fence type blast walls for blast load mitigation", J. Impact Eng., 131, 238-255. https://doi.org/10.1016/j.ijimpeng.2019.05.007.
  18. Jun, L. and Hong, H. (2014), "Numerical study of concrete spall damage to blast loads", J. Impact Eng., 68, 41-55. https://doi.org/10.1016/j.ijimpeng.2014.02.001.
  19. Kala, Z. and Vales, J. (2018), "Imperfection sensitivity analysis of steel columns at ultimate limit state", Arch. Civil Mech. Eng., 18(4), 1207-1218. https://doi.org/10.1016/j.acme.2018.01.009.
  20. Kralik, J. (2017), "Probability and sensitivity nonlinear analysis of the hermetic cover of main shut-off valve under extreme pressure and temperature", Civil Engineering Series, 17(1), 96-111.http://hdl.handle.net/10084/122558.
  21. Krejsa, M., Koubova, L., Flodr, J., Protivinsky, J., Thanh, Q.N. (2017), "Probabilistic prediction of fatigue damage based on linear fracture mechanics", Frattura ed Integrita Strutturale, 39(1), 143-159. https://doi.org/10.3221/IGF-ESIS.39.15.
  22. Kurtoglu, I., Salihoglu, B., Tasan, Y.C. and Tekin, G. (2013), "Validation of mine blast simulations with field tests", Proceedings of the 9th LS-DYNA Conference, Manchester, United Kingdom, June.
  23. Le Blanc, G., Adoum, M. and Lapoujade, V. (2005), "External blast load on structures - Empirical approach", Proceedings of the 5th European LS-DYNA Users Conference, Birmingham, UK, May.
  24. Lin, S.Ch., Li, D. and Yang, B. (2019), "Experimental study and numerical simulation on damage assessment of reinforced concrete beams", J. Impact Eng., 132, 1-15. https://doi.org/10.1016/j.ijimpeng.2019.103323.
  25. Liu, G.R. (2010), Meshfree Methods - Moving Beyond The Finite Element Method, CRC Press, Boca Raton, Florida, USA.
  26. Liu, G.R. and Liu M.B. (2003), Smoothed Particle Hydrodynamics: A Meshfree Particle Method, World Scientific Publishing Co. Pte. Ltd., Singapore.
  27. Liu, G.R. and Liu M.B. (2010), "Smoothed particle hydrodynamics (SPH): An overview and recent developments", Arch. Comput. Methods in Eng., 17, 25-76. https://doi.org/10.1007/s11831-010-9040-7.
  28. LSTC (2019a), LS-DYNA Theory Manual, Livermore Software Technology Corporation, Livermore, California, USA.
  29. LSTC (2019b), LS-DYNA Keyword User's Manual - Volume II: Material models, Livermore Software Technology Corporation, Livermore, California, USA.
  30. Luccioni, B., Araoz, G. (2011), "Erosion Criteria for Frictional Materials Under Blast Load", Mecanica Computacional, XXX(21), 1809-1831. https://cimec.org.ar/ojs/index.php/mc/article/view/3868.
  31. Luccioni, B., Isla, F., Codina, R., Ambrosini, D., Zerbino, R., Giaccio, G. and Torrijose, M.C. (2017), "Effect of steel fibers on static and blast response of high strength concrete", J. Impact Eng., 107, 23-37. https://doi.org/10.1016/j.ijimpeng.2017.04.027.
  32. Monaghan, J.J. (1992), "Smoothed particle hydrodynamics", Annual Review Astronomy Astrophys., 30, 543-574. https://doi.org/10.1146/annurev.aa.30.090192.002551.
  33. Most, T. and Will, J. (2008), "Metamodel of optimal prognosis - an automatic approach for variable reduction and optimal metamodel selection", Proceedings of the Weimarer Optimierungs- und Stochastiktage 5.0, Weimar, Germany, November.
  34. Murray, Y.D. (2007), "User's Manual for LS-DYNA Concrete Material Model 159", Report No. FHWA-HRT-05-062; U.S. Department of Transportation, Federal Highway Administration, McLean, Virginia.
  35. Murray, Y.D., Abu-Odeh, A. and Bligh, R. (2007), "Evaluation of Concrete Material Model 159", Report No. FHWA-HRT-05-063; U.S. Department of Transportation, Federal Highway Administration, McLean, Virginia.
  36. Rashad, M. and Yang, T.Y. (2019), "Improved nonlinear modelling approach of simply supported PC slab under free blast load using RHT model", Comput. Concrete, 23(2), 121-131. https://doi.org/10.12989/cac.2019.23.2.121.
  37. Rashad, M., Wahab, M.M.A. and Yang, T.Y. (2019), "Experimental and numerical investigation of RC sandwich panels with helical springs under free air blast loads", Steel Compos. Struct., 30, 217-230.https://doi.org/10.12989/scs.2019.30.3.217.
  38. Ruggiero, A., Bonora, N., Curiale, G., Muro, S.D, Iannitti, G., Marfia, S., Sacco, E., Scafati, E. and Testa, G. (2019) "Full scale experimental tests and numerical model validation of reinforced concrete slab subjected to direct contact explosion", J. Impact Eng., 132, 1-15. https://doi.org/10.1016/j.ijimpeng.2019.05.023.
  39. Shi, Y., Stewart, M.G. (2015), "Damage and risk assessment for reinforced concrete wall panels subjected to explosive blast loading", J. Impact Eng., 85, 5-19. https://doi.org/10.1016/j.ijimpeng.2015.06.003.
  40. Schwer, L. (2010), "A Brief Introduction to coupling load blast enhanced with multi-material ALE: The best of both worlds for air blast simulation", Proceedings of the 9th LS-DYNA Forum, Bamberg, Germany, October.
  41. Schwer, L., Teng, H. and Souli, M. (2015), "LS-DYNA air blast techniques: Comparison with experiments for close-in charges", Proceedings of the 10th European LS-DYNA Conference, Wurzburg, Germany, June.
  42. Slavik, T.P. (2009), "A coupling of empirical explosive blast loads to ALE air domains in LS-DYNA", Proceedings of the 7th European LS-DYNA Conference, Salzburg, Austria, May.
  43. Sohn, J.M., Kim, S.J., Seong, D.J., Kim, B.J., Ha, Y.Ch., Seo, J.K. and Paik, J.K. (2014), "Structural impact response characteristics of an explosion- resistant profiled blast walls in arctic conditions", Struct. Eng. Mech., 51(5), 755-771. https://doi.org/10.12989/sem.2014.51.5.755
  44. Toussaint, G. and Bouamoul, A. (2010), "Comparison of ALE and SPH methods for simulating mine blast effects on structures", Technical Report TR 2010-326; Defence Research and Development Canada, Valcartier, Canada.
  45. Toussaint, G. and Durocher, R. (2008), "Finite element simulation using SPH particles as loading on typical light armoured vehicles", Proceedings of the 10th International LS-DYNA Users Conference, Detroit, USA, June.
  46. Trajkovski, J. (2017), "Comparison of MM-ALE and SPH methods for modelling blast wave reflections of flat and shaped surfaces", Proceedings of the 11th European LS-DYNA Conference, Salzburg, Austria, May.
  47. Tuan N. and Priyan M. (2009), "Modelling the dynamic response and failure modes of reinforced concrete structures subjected to blast and impact loading", Struct. Eng. Mech., 32(2), 269-282. https://doi.org/10.12989/sem.2009.32.2.269
  48. US Army (1986), "Fundamentals of protective design for conventional weapons", Technical Manual TM 5-855-1; Headquarters, Department of the Army, USA.
  49. US Army (1990), "Structures to resist the effects of accidental explosions", Technical Manual TM 5-1300; Departments of the Army, the Navy, and the Air Force, USA.
  50. Will, J. and Eckardt, S. (2017), "Optimization of Hydrocarbon Production from Unconventional Shale Reservoirs using Numerical Modelling", J. Petroleum Technol., 4, 14-23. http://dx.doi.org/10.15377/2409-787X.2017.04.01.3
  51. Will, J., Eckardt, S. and Ranjan, A. (2017), "Numerical Simulation of Hydraulic Fracturing Process in an Enhanced Geothermal Reservoir using a Continuum Homogenized Approach", Procedia Engineering of Symposium of the International Society for Rock Mechanics of the EUROCK 2017, Ostrava, Czech Republic, July. https://doi.org/10.1016/j.proeng.2017.05.249
  52. Wua, Z., Zhangb, P., Fana, L. and Liua, Q. (2019), "Debris characteristics and scattering pattern analysis of reinforced concrete slabs subjected to internal blast loads - A numerical study", J. Impact Eng., 131, 1-16. https://doi.org/10.1016/j.ijimpeng.2019.04.024
  53. Xiao, W., Andrae, M., Gebbeken, N. (2019), "Experimental and numerical investigations on the shock wave attenuation performance of blast walls with a canopy on top", J. Impact Eng., 131, 123-139. https://doi.org/10.1016/j.ijimpeng.2019.05.009
  54. Yreux, E. (2018), "Fluid flow modeling with SPH in LS-DYNA", Proceedings of the 15th International LS-DYNA Users Conference, Detroit, USA, June.
  55. Yun, S.H., Jeon, H.K. and Park, T. (2013), "Parallel blast simulation of nonlinear dynamics for concrete retrofitted with steel plate using multi-solver coupling", J. Impact Eng., 60, 10-23. https://doi.org/10.1016/j.ijimpeng.2013.04.001
  56. Yuan, S., Hao, H. and Zong, Z. (2017), "A study of RC bridge columns under contact explosion", J. Impact Eng., 109, 378-390. https://doi.org/10.1016/j.ijimpeng.2017.07.017
  57. Zhan, L., Li, Ch., Qin, F., Wensu Ch., Hong, H., Rong, Z. and Kang, Z. (2019), "Experimental and numerical study on CFRP strip strengthened clay brick masonry walls subjected to vented gas explosions", J. Impact Eng., 129, 66-79. https://doi.org/10.1016/j.ijimpeng.2019.02.013