Structural Monitoring and Maintenance

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Damage identification of structures by reduction of dynamic matrices using the modified modal strain energy method

  • Arefi, Shahin Lale (Department of Civil Engineering, University of Mohaghegh Ardabili) ;
  • Gholizad, Amin (Department of Civil Engineering, University of Mohaghegh Ardabili)
  • Received : 2019.09.19
  • Accepted : 2020.05.25
  • Published : 2020.06.25
⟨ Previous Next ⟩

Abstract

Damage detection of structures is one of the most important topics in structural health monitoring. In practice, the response is not available at all structural degrees of freedom, and due to the installation of sensors at some degrees of freedom, responses exist only in limited number of degrees of freedom. This paper is investigated the damage detection of structures by applying two approaches, AllDOF and Dynamic Condensation Method (DCM), based on the Modified Modal Strain Energy Method (MMSEBI). In the AllDOF method, mode shapes in all degrees of freedom is available, but in the DCM the mode shapes only in some degrees of freedom are available. Therefore by methods like the DCM, mode shapes are obtained in slave degrees of freedom. So, in the first step, the responses at slave degrees of freedom extracted using the responses at master degrees of freedom. Then, using the reconstructed mode shape and obtaining the modified modal strain energy, the damages are detected. Two standard examples are used in different damage cases to evaluate the accuracy of the mentioned method. The results showed the capability of the DCM is acceptable for low mode shapes to detect the damage in structures. By increasing the number of modes, the AllDOF method identifies the locations of the damage more accurately.

Keywords

References

  1. Ashory, M.R., Ghasemi-Ghalebahman, A. and Kokabi, M.J. (2018), "An efficient modal strain energy-based damage detection for laminated composite plates", Adv. Compos. Mater., 1-16.
  2. Avitabile, P., Nonis, C. and Obando, S. (2014), "System model modes developed from expansion of uncoupled component dynamic data", Strojniski vestnik - J. Mech. Eng., 60(5), 287-297. https://doi.org/10.5545/sv-jme.2014.1829
  3. Dinh-Cong, D., Vo-Duy, T., Ho-Huu, V., Dang-Trung, H. and Nguyen-Thoi, T. (2017), "An efficient multi-stage optimization approach for damage detection in plate structures", Adv. Eng. Softw., 112, 76-87. https://doi.org/10.1016/j.advengsoft.2017.06.015
  4. Ge, M. and Lui, E.M. (2005), "Structural damage identification using system dynamic properties", Comput. Struct., 83, 2185-2196. https://doi.org/10.1016/j.compstruc.2005.05.002
  5. Ghannadi, P. and Kourehli, S.S. (2018), "Investigation of the accuracy of different finite element model reduction techniques", Struct. Monit. Maint., 5(3), 417-428. https://doi.org/10.12989/SMM.2018.5.3.417
  6. Gomes, H.M. and Silva, N.R.S. (2008), "Some comparisons for damage detection on structures using genetic algorithms and modal sensitivity method", Appl. Math. Model., 32, 2216-2232. https://doi.org/10.1016/j.apm.2007.07.002
  7. Hu, H. and Wu, C. (2009), "Development of scanning damage index for the damage detection of plate structures using modal strain energy method", Mech. Syst. Sig. Pr., 23(2), 274-287. https://doi.org/10.1016/j.ymssp.2008.05.001
  8. Kim, J.T., Ryu, Y.S., Cho, H.M. and Stubbs, N. (2003), "Damage identification in beam-type structures: frequency-based method vs mode-shape-based method", Eng. Struct., 25, 57-67. https://doi.org/10.1016/S0141-0296(02)00118-9
  9. Kourehli, S.S. (2017), "Damage diagnosis of structures using modal data and static response", Period. Polytech., Civ. Eng., 61(1), 135-145. https://doi.org/10.3311/PPme.9922
  10. Lale Arefi, S. and Gholizad, A. (2020), "Damage detection of truss structures by reduction of degrees of freedom using the SEREP method", The Baltic J. Road and Bridge Eng., 15(1), 1-22. https://doi.org/10.7250/bjrbe.2020-15.459
  11. Lale Arefi, S., Gholizad, A. and Seyedpoor, S.M., (2020). "A modified index for damage detection of structures using improved reduction system method", Smart Struct. Syst., 25(1), 1-25. https://doi.org/10.12989/sss.2020.25.1.001
  12. Lee, K.S., Han, S.W. and Geem, Z.W. (2011), "Discrete size and discrete-continuous configuration optimization methods for truss structures using the harmony search algorithm", Int. J. Optim. Civ. Eng., 1, 107-126.
  13. Li, Y., Wang, S., Zhang, M. and Zheng, C. (2016), "An improved modal strain energy method for damage detection in offshore platform structures", J. Mar. Sci. Appl., 15(2), 182-192. https://doi.org/10.1007/s11804-016-1350-1
  14. Liu, F., Li, H., Li, W. and Wang, B. (2014), "Experimental study of improved modal strain energy method for damage localization in jacket-type offshore wind turbines", Renew. Energy., 72, 174-181. https://doi.org/10.1016/j.renene.2014.07.007
  15. Mario, P. (1984), "Dynamic Condensation". AIAA J., 22(5), 724-727. https://doi.org/10.2514/3.48498
  16. Moradipour, P., Chan, Tommy H.T. and Gallage, C. (2015), "An improved modal strain energy method for structural damage detection, 2D simulation", Struct. Eng. Mech., 54(1), 105-119. https://doi.org/10.12989/sem.2015.54.1.105
  17. Pradeep, K.R., Nageswara Rao, B., Srinivasan S.M. and Balasubramaniam, K. (2014), "Modal strain energy change ratio for damage identification in honeycomb sandwich structures", Canadian J. Basic Appl. Sci., 02(01), 10-24.
  18. Seyedpoor, S.M. (2012), "A two stage method for structural damage detection using modal strain energy based index and particle swarm optimization", Int. J. Non-linear Mech., 47(1), 1-8. https://doi.org/10.1016/j.ijnonlinmec.2011.07.011
  19. Shi, Z., Law, S. S. and Zhang, L. (2000), "Structural damage detection from modal strain energy change", J. Eng. Mech., 126(12), 1216-1223. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1216)
  20. Sohn, H., Farrar, C.R., Hemez, F.M. and Czarnecki, J.J. (2002), "Review of structural health monitoring literature 1996-2001". Los Alamos National Laboratory Report, 1-7.
  21. Stubbs, N., Kim, J.T. and Topole, K. (1992), "An efficient and robust algorithm for damage localization in offshore platforms", Proceedings of the 10th ASCE Structures Congress, USA.
  22. Wang, J.Y. and Ni, Y.Q. (2015), "Refinement of damage identification capability of neural network techniques in application to a suspension bridge", Struct. Monit. Maint., 2(1), 77-93. https://doi.org/10.12989/smm.2015.2.1.077
  23. Xu, D., Cheng, X., Huang, S. and Jiang, M. (2010), "Identifying technology for structural damage based on the impedance analysis of piezoelectric sensor", Constr. Build. Mater., 24(12), 2522-2527. https://doi.org/10.1016/j.conbuildmat.2010.06.004
  24. Yang, B. (2005), Stress, Strain, and Structural Dynamics, An Interactive Handbook of Formulas, Solutions, and MATLAB Toolboxes, 1st Ed., Elsevier academic press, California, USA.
  25. Zare Hosseinzadeh, A., Razzaghi, S.A.S. and Ghodrati Amiri, G.h. (2019), "An iterated IRS technique for cross-sectional damage modelling and identification in beams using limited sensors measurement", Inverse Probl. Sci. En., 27(8), 1145-1169. https://doi.org/10.1080/17415977.2018.1503259