Computers and Concrete

  • 제25권6호
  • /
  • Pages.551-563
  • /
  • 2020
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Artificial neural network calculations for a receding contact problem

  • Yaylaci, Ecren Uzun (Department of Fisheries Technology Engineering, Karadeniz Technical University) ;
  • Yaylaci, Murat (Department of Civil Engineering, Recep Tayyip Erdogan University) ;
  • Olmez, Hasan (Department of Marine Engineering Operations, Karadeniz Technical University) ;
  • Birinci, Ahmet (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2020.03.12
  • 심사 : 2020.05.24
  • 발행 : 2020.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper investigates the artificial neural network (ANN) to predict the dimensionless parameters for the maximum contact pressures and contact areas of a contact problem. Firstly, the problem is formulated and solved theoretically by using Theory of Elasticity and Integral Transform Technique. Secondly, the contact problem has been extended based on the ANN. The multilayer perceptron (MLP) with three-layer was used to calculate the contact distances. External load, distance between the two quarter planes, layer heights and material properties were created by giving examples of different values were used at the training and test stages of ANN. Program code was rewritten in C++. Different types of network structures were used in the training process. The accuracy of the trained neural networks for the case was tested using 173 new data which were generated via theoretical solutions so as to determine the best network model. As a result, minimum deviation value (difference between theoretical and C++ ANN results) of was obtained for the network model. Theoretical results were compared with artificial neural network results and well agreements between them were achieved.

키워드

참고문헌

  1. Adamus-Bialek, W., Lechowicz, L., Kubiak-Szeligowska, A.B., Wawszczak, M., Kaminska, E. and Charapek, M.A. (2017), "New look at the drug-resistance investigation of uropathogenic E. Coli strains", Molec. Biol. Report., 44, 191-202. htt://doi.org/10.1007/s11033-017-4099-y.
  2. Aleksendrica, D. and Barton, D.C. (2009), "Neural network prediction of disc brake performance", Tribol. Int., 42(7), 1074-1080. https://doi.org/10.1016/j.triboint.2009.03.005.
  3. Arani, K.S., Zandi, Y., Pham, B.T., Muazu, M.A., Katebi, J., Mohammadhassani, M., Khalafi, S., Mohamad, E.T., Wakil, K. and Khorami, M. (2019), "Computational optimized finite element modeling of mechanical interaction of concrete with fiber reinforced polymer", Comput. Concrete, 23(1), 61-68. https://doi.org/10.12989/cac.2019.23.1.061.
  4. Ashteyat, A.M. and Ismeik, M. (2018), "Predicting residual compressive strength of self-compacted concrete under various temperatures and relative humidity conditions by artificial neural networks", Comput. Concrete, 21(1), 47-54. https://doi.org/10.12989/cac.2018.21.1.047.
  5. Asteris, P.G., Apostolopoulou, M., Skentou, A.D. and Moropoulou, A. (2019), "Application of artificial neural networks for the prediction of the compressive strength of cement-based mortars", Comput. Concrete, 24(4), 329-345. https://doi.org/10.12989/cac.2019.24.4.329.
  6. Asteris, P.G., Armaghani, D.J., Hatzigeorgiou, G.D., Karayannis, C.G. and Pilakoutas, K. (2019), "Predicting the shear strength of reinforced concrete beams using Artificial Neural Networks", Comput. Concrete, 24(5), 469-488. https://doi.org/10.12989/cac.2019.24.5.469.
  7. Behforouz, B., Memarzadeh, P., Eftekhar, M. and Fathi, F. (2019), "Regression and ANN models for durability and mechanical characteristics of waste ceramic powder high performance sustainable concrete", Comput. Concrete, 25(2), 119-132. https://doi.org/10.12989/cac.2020.25.2.119.
  8. Cakiroglu, E., Comez, I. and Erdol, R. (2005), "Application of artificial neural network to double receding contact problem with a rigid stamp", Struct. Eng. Mech., 21, 205-220. https://doi.org/10.12989/sem.2005.21.2.205.
  9. Camoes, A. and Martins, F.F. (2017), "Compressive strength prediction of CFRP confined concrete using data mining techniques", Comput. Concrete, 19(3), 233-241. https://doi.org/10.12989/cac.2017.19.3.233.
  10. Chandrashekhara, K., Okafor, A.C. and Jiang, Y.P. (1998), "Estimation of contact force on composite plates using impact-induced strain and neural networks", Compos. Part B-Eng., 29, 363-370. https://doi.org/10.1016/S1359-8368(98)00003-1.
  11. Chitgar, A.G. and Berenjian, J. (2019), "Elman ANNs along with two different sets of inputs for predicting the properties of SCCs", Comput. Concrete, 24(5), 399-412. https://doi.org/10.12989/cac.2019.24.5.399.
  12. Dawson, C.W. and Wilby, R. (1998), "An artificial neural network approach to rainfall-runoff modelling", Hydrolog. Sci. J., 43(1), 47-66. https://doi.org/10.1080/02626669809492102.
  13. Dehbozorgi, L. and Forokhi, F. (2010), "Effective feature selection for short-term earthquake prediction using Neuro-Fuzzy classifier". a, 2, 165-169. https://doi.org/10.1109/IITA-GRS.2010.5602504
  14. Erdem, R.T., Kantar, E., Gucuyen, E. and Anil, O. (2013), "Estimation of compression strength of polypropylene fibre reinforced concrete using artificial neural networks", Comput. Concrete, 12(5), 613-625. https://doi.org/10.12989/cac.2013.12.5.613.
  15. Erdogan, F., Gupta, G.D. and Cook, T.S. (1973), "Numerical solution of singular integral equations, in methods of analysis and solution of crack problems", Noordhoff, Groningen, Netherlands.
  16. Garzon-Roca, J., Adam, J.M., Sandoval, C. and Roca, P. (2013), "Estimation of the axial behaviour of masonry walls based on artificial neural networks", Comput. Struct., 125, 145-152. https://doi.org/10.1016/j.compstruc.2013.05.006.
  17. Gazder, U., Al-Amoudi, O.S.B., Khan, S.M.S. and Maslehuddin, M. (2017), "Predicting compressive strength of bended cement concrete with ANNs", Comput. Concrete, 20(6), 627-634. https://doi.org/10.12989/cac.2017.20.6.627.
  18. Hanna, A., Ural, D. and Saygili, G. (2007), "Evaluation of liquefaction potential of soil deposits using artificial neural networks". Eng. Comput., 24, 5-16. https://doi.org/10.1108/02644400710718547.
  19. Hasancebi, O. and Dumlupinar, T. (2013), "Linear and nonlinear model updating of reinforced concrete T-beam bridges using artificial neural networks", Comput. Struct., 119, 1-11. https://doi.org/10.1016/j.compstruc.2012.12.017.
  20. Hattori, G. and Serpa, A.L. (2015), "Contact stiffness estimation in ANSYS using simplified models and artificial neural networks", Finite Elem. Anal. Des., 97, 43-53. https://doi.org/10.1016/j.finel.2015.01.003.
  21. Hodhod, O.A., Said, T.E. and Ataya, A.M. (2018), "Prediction of creep in concrete using genetic programming hybridized with ANN", Comput. Concrete, 21(5), 513-523. https://doi.org/10.12989/cac.2018.21.5.513.
  22. Kavzoglu, T. (2001), "An investigation of the design and use of feedforward artificial neural networks in the classification of remotely sensed images", PhD Thesis, School of Geography, University of Nottingham
  23. Keskin, R.S.O. and Arslan, G. (2013), "Predicting diagonal cracking strength of RC slender beams without stirrups using ANNs", Comput. Concrete, 12(5), 697-715. https://doi.org/10.12989/cac.2013.12.5.697.
  24. Kong, L., Chen, X. and Du, Y. (2016), "Evaluation of the effect of aggregate on concrete permeability using grey correlation analysis and ANN", Comput. Concrete, 17(5), 613-628. https://doi.org/10.12989/cac.2016.17.5.613.
  25. Krenk, S. (1975), "On quadrate formulas for singular integral-equations of 1st and 2nd kind", Quart. Appl. Math., 33, 225-232. https://doi.org/10.1090/qam/448967
  26. Le Cun, Y., Denker, J.S. and Solla, S.A. (1990), "Optimal brain damage", Adv. Neur. Inform. Proc. Syst., 2, 598-605.
  27. Lin, H.M., Chang, S.K., Wu, J.H. and Juang, C.H. (2009), "Neural network-based model for assessing failure potential of highway slopes in the Alishan, Taiwan Area: Pre-and post-earthquake investigation", Eng. Geol., 104(3-4), 280-289. https://doi.org/10.1016/j.enggeo.2008.11.007.
  28. Lingam, A. and Karthikeyan, J. (2007), "Prediction of compressive strength for HPC mixes containing different blends using ANN", Comput. Concrete, 13(5), 581-592. https://doi.org/10.12989/cac.2014.13.5.581.
  29. Mohebbi, A., Shekarchi, M., Mahoutian, M. and Mohebbi, S. (2011), "Modeling the effects of additives on rheological properties of fresh self-consolidating cement paste using artificial neural network", Comput. Concrete, 8(3), 279-292. https://doi.org/10.12989/cac.2011.8.3.279.
  30. Ni, H.G. and Wang, J.Z. (2000), "Prediction of compressive strength of concrete by neural networks", Cement Concrete Res., 30, 1245-1250. https://doi.org/10.1016/S0008-8846(00)00345-8.
  31. Ongpeng, J., Soberano, M., Oreta, A. and Hirose, S. (2017), "Artificial neural network model using ultrasonic test results to predict compressive stress in concrete", Comput. Concrete, 19(1), 59-68. https://doi.org/10.12989/cac.2017.19.1.059.
  32. Ozsahin, T.S., Birinci, A. and Cakiroglu, A.O. (2004), "Prediction of contact areas between an elastic layer and two elastic circular punches with neural networks", Struct. Eng. Mech., 18, 441-459. https://doi.org/10.12989/sem.2004.18.4.441.
  33. Ozturk, M., Cansiz, O.F., Sevim, U.K. and Bankir, M.B. (2018), "MLR & ANN approaches for prediction of compressive strength of alkali activated EAFS", Comput. Concrete, 21(5), 559-567. https://doi.org/10.12989/cac.2018.21.5.559.
  34. Rapettoa, M.P., Almqvista, A., Larssona, R. and Lugt, P.M. (2009), "On the influence of surface roughness on real area of contact in normal, dry, friction free, rough contact by using a neural network", Wear, 266(5-6), 592-595. https://doi.org/10.1016/j.wear.2008.04.059.
  35. Saha, P., Prasad, M.L.V and Kumar, P.R. (2017), "Predicting strength of SCC using artificial neural network and multivariable regression analysis", Comput. Concrete, 20(1), 31-38. https://doi.org/10.12989/cac.2017.20.1.031.
  36. Sanad, A. and Saka, M.P. (2001), "Prediction of ultimate smear shear strength of reinforced-concrete deep beams using neural networks", J. Struct. Eng., ASCE, 127, 818-828. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(818).
  37. Serafinska, A., Graf, W. and Kaliske, M. (2018), "Artificial neural networks-based friction law for elastomeric materials applied in finite element sliding contact simulations", Complexity-Complex Algorithms for Data-Driven Model Learning in Science and Engineering, 1-15. https://doi.org/10.1155/2018/4396758.
  38. Shebani, A. and Iwnicki, S. (2018), "Prediction of wheel and rail wear under different contact conditions using artificial neural networks", Wear, 406-407, 173-184. https://doi.org/10.1016/j.wear.2018.01.007.
  39. Shirkhania, A., Davarniab, D. and Azar, B.F. (2019), "Prediction of bond strength between concrete and rebar under corrosion using ANN", Comput. Concrete, 23(4), 273-279. https://doi.org/10.12989/cac.2019.23.4.273.
  40. Sipos, T.K., Sigmund, V. and Hadzima-Nyarko, M. (2013), "Earthquake performance of infilled frames using neural networks and experimental database", Eng. Struct., 51, 113-127. https://doi.org/10.1016/j.engstruct.2012.12.038.
  41. Tang, C.W., Lin, Y. and Kuo, S.F. (2007), "Investigation on correlation between pulse velocity and compressive strength of concrete using ANNs", Comput. Concrete, 4(6), 477-497. https://doi.org/10.12989/cac.2007.4.6.477.
  42. Topcu, I.B., Boga, A.R. and Hocaoglu, F.O. (2009), "Modeling corrosion currents of reinforced concrete using ANN", Auto. Constr., 18, 145-152. https://doi.org/10.1016/j.autcon.2008.07.004.
  43. Vanluchene, R.D. and Sun, R. (1990), "Neural networks in structural engineering", Comput. Aid. Civil Infrastr. Eng., 5, 207-215. https://doi.org/10.1111/j.1467-8667.1990.tb00377.x.
  44. Xiaoqiang, R., Wujun, C., Gongyi, F. and Shilin, D. (2005), "Neural network model for solving elastoplastic contact problem", Chin. J. Appl. Mech., 1.
  45. Yan, H., Jiang, Y., Zheng, J., Peng, C. and Li, Q. (2006), "A multilayer perceptron based medical decision support system for heart disease diagnosis", Exp. Syst. Appl., 30(2), 272-281. https://doi.org/10.1016/j.eswa.2005.07.022.
  46. Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter plane", Struct. Eng. Mech., 48, 241-255. https://doi.org/10.12989/sem.2013.48.2.241.
  47. Zurada, J.M. (1992), Introduction to Artificial Neural Systems, West Publishing Company, St. Paul.

피인용 문헌

  1. Influences of porosity distributions and boundary conditions on mechanical bending response of functionally graded plates resting on Pasternak foundation vol.38, pp.1, 2020, https://doi.org/10.12989/scs.2021.38.1.001
  2. Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM vol.27, pp.3, 2020, https://doi.org/10.12989/cac.2021.27.3.199
  3. An efficient higher order shear deformation theory for free vibration analysis of functionally graded shells vol.40, pp.2, 2020, https://doi.org/10.12989/scs.2021.40.2.307
  4. Z shape joints under uniaxial compression vol.12, pp.2, 2020, https://doi.org/10.12989/acc.2021.12.2.105