DOI QR코드

DOI QR Code

Large amplitude free vibrations of FGM shallow curved tubes in thermal environment

  • Babaei, Hadi (Department of Mechanical Engineering, South Tehran Branch, Islamic Azad University) ;
  • Kiani, Yaser (Faculty of Engineering, Shahrekord University) ;
  • Eslami, M. Reza (Mechanical Engineering Department, Amirkabir University of Technology)
  • Received : 2019.09.06
  • Accepted : 2020.01.23
  • Published : 2020.06.25

Abstract

In the current investigation, large amplitude free vibration behavior of shallow curved pipes (tubes) made of functionally graded materials is investigated. Properties of the tube are distributed across the radius of the tube and are obtained by means of a power law function. It is also assumed that all thermo-mechanical properties are temperature dependent. The governing equations of the tube are obtained using a higher order shear deformation tube theory, where the traction free boundary conditions are satisfied on the top and bottom surfaces of the tube. The von Kármán type of geometrical non-linearity is included into the formulation to consider the large displacements and small strains. Uniform temperature elevation of the tube is also included into the formulation. For the case of tubes which are simply supported in flexure and axially immovable, the governing equations are solved using the two-step perturbation technique. Closed form expressions are provided to obtain the small and large amplitude fundamental natural frequencies of the FGM shallow curved tubes in thermal environment. Numerical results are given to explore the effects of thermal environment, radius ratio, and length to thickness ratio of the tube on the fundamental linear and non-linear frequencies.

Keywords

Acknowledgement

The research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.

References

  1. Arefi, M. (2015), "The effect of different functionalities of fgm and FGPM layers on free vibration analysis of the FG circular plates integrated with piezoelectric layers", Smart Struct. Syst., Int. J., 15(5), 1345-1362. https://doi.org/10.12989/sss.2015.15.5.1345
  2. Babaei, H., Kiani, Y. and Eslami, M.R. (2018a), "Application of two-steps perturbation technique to geometrically nonlinear analysis of long FGM cylindrical panels on elastic foundation under thermal load", J. Therm. Stress., 41(7), 847-865. https://doi.org/10.1080/01495739.2017.1421054
  3. Babaei, H., Kiani, Y. and Eslami, M.R. (2018b), "Geometrically nonlinear analysis of shear deformable FGM shallow pinned arches on nonlinear elastic foundation under mechanical and thermal loads", Acta Mech., 229(7), 3123-3141. https://doi.org/10.1007/s00707-018-2134-2
  4. Babaei, H., Kiani, Y. and Eslami, M.R. (2018c), "Geometrically nonlinear analysis of functionally graded shallow curved tubes in thermal environment", Thin-wall. Struct., 132, 48-57. https://doi.org/10.1016/j.tws.2018.08.008
  5. Babaei, H., Kiani, Y. and Eslami, M.R. (2019a), "Thermal buckling and post-buckling analysis of geometrically imperfect FGM clamped tubes on nonlinear elastic foundation", Appl. Math. Model., 71, 12-30. https://doi.org/10.1016/j.apm.2019.02.009
  6. Babaei, H., Kiani, Y. and Eslami, M.R. (2019b), "Buckling and post-buckling analysis of geometrically imperfect FGM pin-ended tubes surrounded by nonlinear elastic medium under compressive and thermal loads", Int. J. Struct. Stabil. Dyn., 19(7), 1950089. https://doi.org/10.1142/S0219455419500895
  7. Babaei, H., Kiani, Y. and Eslami, M.R. (2019c), "Large amplitude free vibrations of long FGM cylindrical panels on nonlinear elastic foundation based on physical neutral surface", Compos. Struct., 220, 888-898. https://doi.org/10.1016/j.compstruct.2019.03.064
  8. Babaei, H., Kiani, Y. and Eslami, M.R. (2019d), "Large amplitude free vibration analysis of shear deformable FGM shallow arches on nonlinear elastic foundation", Thin-wall. Struct., 144, 106237. https://doi.org/10.1016/j.tws.2019.106237
  9. Babaei, H., Kiani, Y. and Eslami, M.R. (2019e), "Thermally induced large deflection analysis of shear deformable FGM shallow curved tubes using perturbation method", ZAMM- J. App. Math. Mech., 99(2), Article No. e201800148. https://doi.org/10.1002/zamm.201800148
  10. Babaei, H., Kiani, Y. and Eslami, M.R. (2019f), "Thermomechanical nonlinear In-plane analysis of fix-ended FGM shallow arches on nonlinear elastic foundation using twostep perturbation technique", Int. J. Mech. Mater. Des., 15(2), 225-244. https://doi.org/10.1007/s10999-018-9420-y
  11. Chen, Y.Z. (2018), "Transfer matrix method for solution of FGMs thick-walled cylinder with arbitrary inhomogeneous elastic response", Smart Struct. Syst., Int. J., 21(4), 469-477. https://doi.org/10.12989/sss.2018.21.4.469
  12. Chen, Y., Fu, Y., Zhong, J. and Li, Y. (2017), "Nonlinear dynamic responses of functionally graded tubes subjected to moving load based on a refined beam model", Nonlinear Dyn., 88(2), 1441-1452. https://doi.org/10.1007/s11071-016-3321-0
  13. Duc, N.D. (2013), "Nonlinear dynamic response of imperfect eccentrically stiffened FGM double curved shallow shells on elastic foundation", Compos. Struct., 102, 306-314. https://doi.org/10.1016/j.compstruct.2012.11.017
  14. Duc, N.D. (2016), "Nonlinear thermal dynamic analysis of eccentrically stiffened S-FGM circular cylindrical shells surrounded on elastic foundations using the Reddy's third-order shear deformation shell theory", Eur. J. Mech. A-Solid, 58, 10-30. https://doi.org/10.1016/j.euromechsol.2016.01.004
  15. Duc, N.D. (2018), "Nonlinear thermo-electro-mechanical dynamic response of shear deformable piezoelectric Sigmoid functionally graded sandwich circular cylindrical shells on elastic foundations", J. Sandw. Struct. Mater., 20(3), 351-378. https://doi.org/10.1177/1099636216653266
  16. Duc, N.D. and Cong, P.H. (2018), "Nonlinear dynamic response and vibration of sandwich composite plates with negative Poisson's ratio in auxetic honeycombs", J. Sandw. Struct. Mater., 20(6), 692-717. https://doi.org/10.1177/1099636216674729
  17. Duc, N.D., Bich, D.H. and Cong, P.H. (2016), "Nonlinear thermal dynamic response of shear deformable FGM plates on elastic foundations", J. Therm, Stresses, 39(3), 278-297. https://doi.org/10.1080/01495739.2015.1125194
  18. Duc, N.D., Nguyen, P.D. and Khoa N.D. (2017), "Nonlinear dynamic analysis and vibration of eccentrically stiffened S-FGM elliptical cylindrical shells surrounded on elastic foundations in thermal environments", Thin Wall. Struct., 117, 178-189. https://doi.org/10.1016/j.tws.2017.04.013
  19. Duc, N.D., Quang, V.D., Nguyen, P.D. and Chien T.M. (2018), "Nonlinear dynamic response of FGM porous plates on elastic foundation subjected to thermal and mechanical loads using the first order shear deformation theory", J. Appl. Computat. Mech., 4(4), 245-259. https://doi.org/10.22055/jacm.2018.23219.1151
  20. Duc, N.D., Hadavinia, H., Quan, T.Q. and Khoa, N.D. (2019), "Free vibration and nonlinear dynamic response of imperfect nanocomposite FG-CNTRC double curved shallow shells in thermal environment", Eur. J. Mech. A-Solid, 75, 355-366. https://doi.org/10.1016/j.euromechsol.2019.01.024
  21. Eslami, M.R. (2018), Buckling and Postbuckling of Beams, Plates, and Shells, Springer, Switzerland.
  22. Fariborz, J. and Batra, R.C. (2019), "Free vibration of bi-directional functionally graded material circular beam using shear deformation theory employing logarithmic function of radius", Compos. Struct., 210, 217-230. https://doi.org/10.1016/j.compstruct.2018.11.036
  23. Fu, Y., Zhong, J., Shao, X. and Chen, Y. (2015), "Thermal postbuckling analysis of functionally graded tubes based on a refined beam model", Int. J. Mech. Sci., 96-97, 58-64. https://doi.org/10.1016/j.ijmecsci.2015.03.019
  24. Hetnarski, R.B. and Eslami, M.R. (2019), Thermal Stresses, Advanced Theory and Applications, (2th Edition), Springer, Switzerland.
  25. Hosseini, S.A.H. and Rahmani, O. (2016), "Free vibration of shallow and deep curved FG nanobeam via nonlocal Timoshenko curved beam model", Appl. Phy. A, 122, 169-178. https://doi.org/10.1007/s00339-016-9696-4
  26. Huang, Y. and Li, X.F. (2010a), "Buckling of functionally graded circular columns including shear deformation", Mater. Des., 31(7), 3159-3166. https://doi.org/10.1016/j.matdes.2010.02.032
  27. Huang, Y. and Li, X.F. (2010b), "Bending and vibration of circular cylindrical beams with arbitrary radial nonhomogeneity", Int. J. Mech. Sci., 52(4), 595-601. https://doi.org/10.1016/j.ijmecsci.2009.12.008
  28. Jun, L., Guangwei, R., Jin, P., Xiaobin, L. and Weiguo, W. (2014), "Free vibration analysis of a laminated shallow curved beam based on Trigonometric shear deformation theory", Mech. Based Des. Struct., 42(1), 111-129. https://doi.org/10.1080/15397734.2013.846224
  29. Keibolahi, A., Kiani, Y. and Eslami, M.R. (2018), "Dynamic snap-through of shallow arches under thermal shock", Aerosp. Sci. Tech., 77, 545-554. https://doi.org/10.1016/j.ast.2018.04.003
  30. Malekzadeh, P., Atashi, M.M. and Karami, G. (2009), "In-plane free vibration of functionally graded circular arches with temperature-dependent properties under thermal environment", J. Sound. Vib., 326(3-5), 837-851. https://doi.org/10.1016/j.jsv.2009.05.016
  31. Malekzadeh, P., Golbahar Haghighi, M.R. and Atashi, M.M. (2010), "Out-of-plane free vibration of functionally graded circular curved beams in thermal environment", Compos. Struct., 92(2), 541-552. https://doi.org/10.1016/j.compstruct.2009.08.040
  32. Piovan, M.T., Domini, S. and Ramirez, J.M. (2012), "In-plane and out-of-plane dynamics and buckling of functionally graded circular curved beams", Compos. Struct., 94(11), 3194-3206. https://doi.org/10.1016/j.compstruct.2012.04.032
  33. Rahmani, O., Hosseini, S.A.H., Ghoytasi, I. and Golmohammadi, H. (2018), "Free vibration of deep curved FG nano-beam based on modified couple stress theory", Steel Compos. Struct., Int. J., 26(5), 607-620. https://doi.org/10.12989/scs.2018.26.5.607
  34. Shafiei, N. and She, G.L. (2018), "On vibration of functionally graded nanotubes in thermal environment", Int. J. Eng. Sci., 133, 84-98. https://doi.org/10.1016/j.ijengsci.2018.08.004
  35. She, G.L., Yuan, F.G. and Ren, Y.R. (2017), "Nonlinear analysis of bending, thermal buckling and post-buckling for functionally graded tubes by using a refined beam theory", Compos. Struct., 165, 74-82. https://doi.org/10.1016/j.compstruct.2017.01.013
  36. She, G.L., Yuan, F.G., Ren, Y.R., Liu, H.B. and Xiao, W.S. (2018a), "Nonlinear bending and vibration analysis of functionally graded porous tubes via a nonlocal strain gradient theory", Compos. Struct., 203, 614-623. https://doi.org/10.1016/j.compstruct.2018.07.063
  37. She, G.L., Ren, Y.R., Yuan, F.G. and Xiao, W.S. (2018b), "On vibrations of porous nanotubes", Int. J. Eng. Sci., 125, 23-35. https://doi.org/10.1016/j.ijengsci.2017.12.009
  38. She, G.L., Ren, Y.R., Yuan, F.G. (2019), "Hygro-thermal wave propagation in functionally graded double-layered nanotubes systems", Steel Compos. Struct., Int. J., 31(6), 641-653. https://doi.org/10.12989/scs.2019.31.6.641
  39. Shen, H.S. (2009), Functionally Graded Materials Nonlinear Analysis of Plates and Shells, CRC Press, Boca Raton, FL, USA. https://doi.org/10.1201/9781420092578
  40. Shen, H.S. (2011), "A novel technique for nonlinear analysis of beams on two-parameter elastic foundations", Int. J. Struct. Stab. Dyn. 11(6), 999-1014. https://doi.org/10.1142/S0219455411004440
  41. Shen, H.S. (2013), A Two-Step Perturbation Method in Nonlinear Analysis of Beams, Plates and Shells, Wiley & Sons, Singapore.
  42. Shen, H.S. and Wang, Z.X. (2014a), "Nonlinear Analysis of shear deformable FGM beams resting on elastic foundations in thermal environments", Int. J. Mech. Sci., 81, 195-206. https://doi.org/10.1016/j.ijmecsci.2014.02.020
  43. Shen, H.S. and Wang, H. (2014b), "Nonlinear vibration of shear deformable FGM cylindrical panels resting on elastic foundation in thermal environment", Compos. Part B, 60, 167-177. https://doi.org/10.1016/j.compositesb.2013.12.051
  44. Thai, H.T. and Vo, T.P. (2012), "Bending and free vibration of functionally graded beams using various higher-order shear deformation beam theories", Int. J. Mech. Sci., 62(1), 57-66. https://doi.org/10.1016/j.ijmecsci.2012.05.014
  45. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2019), "Refined shear deformation theories for laminated composite arches and beams with variable thickness: Natural frequency analysis", Engin. Anal. Boundary Elem., 100, 24-47. https://doi.org/10.1016/j.enganabound.2017.07.029
  46. Wu, C.P. and Li, H.Y. (2012), "Exact solutions of free vibration of rotating multilayered fgm cylinders", Smart Struct. Syst., Int. J., 9(2), 105-125. https://doi.org/10.12989/sss.2012.9.2.105
  47. Wu, C.P. and Liu, W.L. (2013), "3D buckling analysis of FGM sandwich plates under bi-axial compressive loads", Smart Struct. Syst., Int. J., 13(1), 111-135. https://doi.org/10.12989/sss.2014.13.1.111
  48. Zhang, D.G. (2014), "Thermal post-buckling and nonlinear vibration analysis of FGM beams based on physical neutral surface and high order shear deformation theory", Meccanica, 49(2), 283-293. https://doi.org/10.1007/s11012-013-9793-9
  49. Zhang, P. and Fu, Y. (2013), "A higher-order beam model for tubes", Eur. J. Mech. A/Solids, 38, 12-19. https://doi.org/10.1016/j.euromechsol.2012.09.009
  50. Zhong, J., Fu, Y., Wan, D. and Li, Y. (2016), "Nonlinear bending and vibration of functionally graded tubes resting on elastic foundations in thermal environment based on a refined beam model", Appl. Math. Model., 40(17-18), 7601-7614. https://doi.org/10.1016/j.apm.2016.03.031

Cited by

  1. Buckling analysis of functionally graded plates using HSDT in conjunction with the stress function method vol.27, pp.1, 2020, https://doi.org/10.12989/cac.2021.27.1.073