DOI QR코드

DOI QR Code

The Review of Studies on Safety and Health Management System of the Specialized Construction Company

전문건설업 안전보건경영시스템 동향연구

  • Kim, Se-hoon (The Graduate School of Construction Engineering, Chung-Ang University) ;
  • Kang, Hwi-jin (Dept. Sogang University ICT Convergence Research Institut)
  • 김세훈 (중앙대학교 건설대학원) ;
  • 강휘진 (서강대학교 ICT융합 재난연구소)
  • Received : 2019.12.06
  • Accepted : 2020.03.11
  • Published : 2020.03.31

Abstract

The introduction, construction, and operation of the safety and health management system of specialized construction companies have a problem incurred in the cost of introducing and operating the safety system. In addition, it is difficult to establish a virtuous cycle system to build a safety system, obtain a certification, and settle in a harsh environment that does not have technical personnel in construction safety. The purpose of this paper is to investigate and review the literature related to the safety and health management system of the construction industry and to analyze various research trends such as the actual situation. Through this, it is to find ways to improve the safety and health management system level of specialized construction companies that want to build and obtain the safety and health management system of the construction industry and specialized construction companies that are carrying out the post-assessment and extension examination after obtaining the certification.

전문건설 업체의 안전보건경영시스템 도입·구축·운용은 안전시스템 도입과 운영 과정에 소요되는 비용이 발생하는 문제가 있다. 그리고 건설 안전 분야 기술 인력을 보유하지 못한 열악한 환경에서 안전시스템 구축 및 인증 취득 및 정착으로의 선순환 체계 구축이 쉽지 않은 실정이다. 이 논문의 목적은 건설업 안전보건경영시스템 관련 문헌을 조사·검토하고 실태 등 다양한 연구 동향을 분석하는 데 있다. 이를 통하여 건설업 안전보건경영시스템 구축 및 인증을 취득하고자 하는 전문건설 업체와 인증 취득 후 사후심사 및 연장심사를 이행 중인 전문건설업체의 안전보건경영시스템 수준 향상을 위한 방안을 모색하는데 있다.

Keywords

References

  1. Ahn, H. K., Seo, H. C., Kim, J. H., and Kim, J. J. (2010). The Improvement Plan for The Kosha18001 System Introduction Enlargement of The Professional Construction Industry. Society of Visual Engineering Estimate Conference, 10(2): 145-148.
  2. Jang, B. J. (2005). A Study on the Application and Performance of an Occupational Health and Safety Management System in a Construction Company. Degree Thesis (Dr.). Myongji University Graduate School. 138p.
  3. Kim, M. Y. and Kang, K. S. (2017). Safety Culture and Suggestions for the KOSHA-18001 Implementation. Korea Safety Management Science Association Spring Conference. pp.23-31.
  4. Korea Mech. Const. Contractors Association (2012). KOSHA18001, OHSAS 18001 - Domestic Accreditation of Safety and Health Management Systems in Construction. KMCCA Journal. 262: 53-57.
  5. Korea Occupational Safety and Health Agency (2019). Safety and Health Management System 18001 Regulations for Certification of KOSHA. 2019.05.02. No.871.
  6. Korea Occupational Safety and Health Agency (2019). The Standards for Certification of the Safety and Health Management System KOSHA-MS. The Korea Occupational Safety and Health Agency.
  7. Lee, C. H. (2015). Safety Management Cafe. Korean Academic Information.
  8. Lee, J. S. (2015). A Study on Usability Improvement of KOSHA 18001 in Construction Industry. Degree Thesis (Dr.). Incheon University Graduate School. 149p.
  9. Lee, J. S., Lee, D. Y., and Oh, T. G. (2015). A Study on Usability Improvement of KOSHA 18001 Utilization in Construction Industry associated with the External Evaluator. Journal of the Korean Institute of Safety. 30(4): 135-141
  10. Lee, J. S., Lee, M. G., Lee, D. Y., and Oh, T. G. (2015). A Study on the Improvement of Effectiveness of KOSHA 18001 in Construction Industry. Journal of the Korea Institute of Safety. 30(3): 80-84.
  11. Oh, B. H., Choi, B. J., Han, M. H., Lim, H. T., and Cho, T. G. (2017). Accident Prevention Effect of Occupational Safety & Health Management System (KOSHA 18001) in the Construction Industry. Disaster Safety Paper. 1(1): 19-26.
  12. Park, D. J., Kang, B. H., and Kim, H. K. (2015). OHSAS Practices Analysis : A Case Study using Audit Results. Korean Management Science Review. 32(2): 79-89. https://doi.org/10.7737/KMSR.2015.32.2.079
  13. Park, H. C. (2013). A Study on the Improvement of Implementation and Enhancement of Effectiveness of Occupational Safety & Health Management System. Degree Thesis (Dr.). Incheon University Graduate School. 171p.
  14. Park, H. C. (2016). Impacts of Occupational Health and Safety Management on Business Performances. Degree Thesis (Dr.). Graduate School of Pusan National University. 186p.
  15. Park, K. T. and Sohn, K. S. (2004). A Study on the Application Instance of KOSHA 18001 to Construction Firms. Journal of the Korean Society of Safety. 19(4): 86-93.
  16. Seo, Y. H., Woo, I. S., Jang, C., and Hwang, M. H. (2015). Research on Effectiveness of Risk Assessment of Construction Industry by Self Administered Questionnaires. Journal of the Korea Risk Management Society. 26(3): 1-27.
  17. Shim, H. S. (2019). Impact of Human Factors on Safety and Health Performance in the Safety and Health Management System in Construction. Degree Thesis (Dr.). Graduate School of Myongji University. 145p.
  18. Sohn, I. M. (2012). Strategies of Occupational Health and Safety Management System using SWOT/AHP Analysis. Journal of the Korea Academy Industrial Cooperation Society. 13(7): 2895-2902. https://doi.org/10.5762/KAIS.2012.13.7.2895
  19. Sohn, I. M. and Kwak, H. Y. (2011). The Review of Studies on the Occupational Healths and Safety Management System. Korea Safety Management & Science Journal. 13(2): 19-30.
  20. Song, C. S. (2014). An Empirical Study on the Improvement of Safety and Health Management System for Specialty Construction. Degree Thesis (Dr.). Myongji University Graduate School. 122p.
  21. Song, C. S. and Kang, K. S. (2013). A Study on the Improvement of Safety and Health Management System for Professional Construction Companies. November at the Korea Society of Safety and Management Science. pp.341-366.
  22. Song, K. I. and Choi, B. K. (2019). Characteristics and Case Study of ISO 45001:2018 Occupational Health and Safety Management Systems. Journal of the Korean Institute of Plant Engineering. 24(1): 19-24.