Structural Engineering and Mechanics

  • 제74권5호
  • /
  • Pages.671-678
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Glass powder admixture effect on the dynamic properties of concrete, multi-excitation method

  • Kadik, Abdenour (Laboratory of Applied Mechanic (LMA), University of Science and Technology of Oran) ;
  • Boutchicha, Djilali (Laboratory of Applied Mechanic (LMA), University of Science and Technology of Oran) ;
  • Bali, Abderrahim (Laboratory of civil engineering and environment material (LMGCE), Polytechnic School of Algeria) ;
  • Cherrak, Messaouda (Laboratory of civil engineering and environment material (LMGCE), Polytechnic School of Algeria)
  • 투고 : 2018.11.20
  • 심사 : 2020.01.23
  • 발행 : 2020.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this work, the dynamic properties of a high performance concrete containing glass powder (GP) was studied. The GP is a new cementitious material obtained by recycling waste glass presenting pozzolanic activity. This eco-friendly material was incorporated in concrete mixes by replacing 20 and 30% of cement. The mechanical properties of building materials highly affect the response of the structure under dynamic actions. First, the resonant vibration frequencies were measured on concrete plate with free boundary conditions after 14, 28 and 90 curing days by using an alternative vibration monitoring technique. This technique measures the average frequencies of several excitations done at different points of the plate. This approach takes into account the heterogeneity of a material like concrete. So, the results should be more precise and reliable. For measuring the bending and torsion resonant frequencies, as well as the damping ratio. The dynamic properties of material such as dynamic elastic modulus and dynamic shear modulus were determined by modelling the plate on the finite element software ANSYS. Also, the instantaneous aroused frequency method and ultrasound method were used to determine the dynamic elastic modulus for comparison purpose, with the results obtained from vibration monitoring technique.

키워드

과제정보

I would like to express my gratitude to Professor SEREIR Zouaoui, Director of the Laboratory of Composite Structures and Innovative Materials at Oran University (USTO-MB) in Algeria, for having made available to me computer resources for numerical simulations with ANSYS.

참고문헌

  1. ASTM C215 (2002), Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, ASTM, PA, USA.
  2. ASTM C 469(2000), Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, Annual Book of ASTM Standards, PA, USA.
  3. Bahr, O., Schaumann, P., Bollen, B. and Bracke, J. (2013), "Young's modulus and Poisson's ratio of concrete at high temperatures: Experimental investigations", Mater. Design, 45, 421-429. https://doi.org/10.1016/j.matdes.2012.07.070
  4. Bilondi, M.P, Marandi, S.M. and Ghasemi, F., "Effect of recycled glass powder on the asphalt concrete modification", Struct. Eng. Mech., 59, 373-385. https://doi.org/10.1016/j.matdes.2012.07.070.
  5. Boumiz, A., Vernet, C. and Tenoudji F.C. (1996), "Mechanical properties of cement pastes and mortars at early ages: evolution with time and degree of hydration", Adv. Cement Based Mater., 3, 94-106. https://doi.org/10.1016/S1065-7355(96)90042-5.
  6. Cheng, K., and Timoshenko, S. (1965). Textbook of Mechanical Vibrational Science, Technical Industry Press, Beijing.
  7. DIN 1048 (1991), Prufung von Beton, Empfehlungen und Hinweise als Erganzung zu, Deutscher Ausschauss fur Stahlbeton, Berlin (in German).
  8. Emiroglu, M., Yildiz, S., Kelestemur, M.H. (2015), "A study on dynamic modulus of self-consolidating rubberized concrete", Struct. Eng. Mech., 15(5), 795-805. https://doi.org/10.12989/cac.2015.15.5.795.
  9. Giner, V.T, Ivorra, S., Baeza, F.J., Zornoza, E., Ferrer, B. (2011), "Silica fume admixture effect on the dynamic properties of concrete", Construct. Build. Mater., 25, 3272-3277. https://doi.org/10.1016/j.conbuildmat.2011.03.014.
  10. Kamali, M. and Ghahremaninezhad, A. (2015), "Effect of glass powders on the mechanical and durability properties of cementitious materials", Construct. Build. Mater., 10, 407-416. https://doi.org/10.1016/j.conbuildmat.2015.06.010.
  11. Laldji, S. and Tagnit-Hamou, A. (2007), "Glass frit for concrete structures: a new, alternative cementitious material", Can. J. Civ. Eng., 34, 793-802. https://doi.org/10.1139/l06-168.
  12. Lu, X., Sun, Q., Feng, W. and Tian, J. (2013), "Evaluation of dynamic modulus of elasticity of concrete using impact-echo method", Construct. Build. Mater., 47, 231-239. https://doi.org/10.1016/j.conbuildmat.2013.04.043.
  13. MEHTA, P.K. (1986), Concrete Structure Properties and Materials, Englewood Cliffs, New Jersey.
  14. NA442/2013 "Ciment - composition, specification et criteres de conformite des ciments courants", Institut Algerien de Normalisation (IANOR), 21.
  15. NF EN 12390 (2012), "Essai pour le beton durci - Partie 3: resistance a la compression des eprouvettes", Association Francaise de normalisation (AFNOR).
  16. NF EN 14651 (2007), "Methode d'essai du beton de fibres metalliques - Mesurage de la resistance a la traction par flexion (limite de proportionnalite (LOP), resistance residuelle)", Association Francaise de normalisation (AFNOR).
  17. Ou, J.P., Liu, T.J. and Li, J.H. (2006), "Analysis of the damping behavior and microstructure of cement matrix with silane-treated silica fume", J. Wuhan Univ. Technol. Mater. Sci., 21(2), 1-5. https://doi.org/10.1007/BF02840826.
  18. Ou, J.P., Liu, T.J., Li, J.L., (2008), "Dynamic and seismic property experiments of high damping concrete and its frame models", J. Wuhan Univ. Technol. Mater. Sci. Ed., 23(2), 1-6. https://doi.org/10.1007/s11595-006-1001-5
  19. Pessiki, S.P. and Carino, N.J. (1988), "Setting time and strength to concrete using the impact-echo method", ACI Materials J., 85, 389-399.
  20. Prassianakis, I.N. (1977), "Moduli of elasticity evaluation using ultrasound", Insight, 39, 425-429.
  21. Prassianakis, I.N. (2004), "Ultrasonic testing of non-metallic materials: concrete and marble", Theoretical Appl. Fracture Mech., 42, 191-198. https://doi.org/10.1016/j.tafmec.2004.08.007
  22. PN-EN ISO 12680-1(2008), "Methods of test for refractory products -- Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration", ISO.
  23. Schwarz, N., Cam, H and Neithalath, N. (2008), "Influence of fine glass powder on the durability characteristics of concrete and its comparison to fly ash", Cement Concrete Compos., 30, 486-496. https://doi.org/10.1016/j.cemconcomp.2008.02.001
  24. Shayan, A. (2002), "Value-added utilisation of waste glass in concrete", IABSE Symposium Melbourne, Melbourne, September.
  25. Shayane, A. and Xu, A. (2004), "Value-added utilisation of waste glass in concrete", Cement Concrete Res., 34, 81-89. https://doi.org/10.1016/S0008-8846(03)00251-5.
  26. Shi, C., Wu, Y., Riefler, C. and Wang, H. (2005), "Characteristics and pozzolanic reactivity of glass powders", Cement Concrete Res., 35, 987-993. https://doi.org/10.1016/j.cemconres.2004.05.015.
  27. Soliman, N.A. and Tagnit-Hamou, A. (2016), "Development of ultra-high- performance concrete using glass powder - Towards ecofriendly concrete", Construct. Build. Mater., 125, 600-612. https://doi.org/10.1016/j.conbuildmat.2016.08.073.
  28. Swamy, N. and Rigby G. (1971), "Dynamic properties of hardened paste, mortar and concrete", Mater Struct., 4(1), 13-40. https://doi.org/10.1007/BF02473927.
  29. Wang, Z., Gao, Z., Wang, Y., Cao, Y., Wang, G., Liu, B. and Wang, Z., (2015), "A new dynamic testing method for elastic, shear modulus and Poisson's ratio of concrete", Construct. Build. Mater., 100, 129-135. https://doi.org/10.1016/j.conbuildmat.2015.09.060.
  30. Xu, Y. and Chung, D.D.L, "Effect of carbon fibers on the vibration-reduction ability of cement", Cem. Concr. Res., 29, 1107-1109. https://doi.org/10.1016/S0008-8846(99)00078-2.
  31. Yaogang, T., Shuaifeng, S., Kan, J. and Shuguang, H. (2015), "Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion", Construct. Build. Mater., 93, 1151-1156. https://doi.org/10.1016/j.conbuildmat.2015.05.015.
  32. Wang, Z., Wang, Z., Wang, B. J., Wang, Y., Liu, B., Rao, X., Wel, P. and Yang, Y. (2014), "Dynamic testing and Evaluation of Modulus od Elasticity (MOE) of SPF Dimensional Lumber", BioResources, 9(3), 3869-3882.
  33. Zidol, A., Tognonvi, M.T. and Tagnit-Hamou, A. (2017), "Effect of Glass Powder on Concrete Sustainability", New J. Glass Ceramics, 7, 34-47. https://doi.org/10.4236/njgc.2017.72004

피인용 문헌

  1. A Novel Method of Crushing Glass Aggregates to Reduce the Alkali-Silica Reaction vol.25, pp.12, 2020, https://doi.org/10.1007/s12205-021-2341-6