DOI QR코드

DOI QR Code

Numerical and experimental study of the nested-eccentric-cylindrical shells damper

  • Reisi, Alireza (Department of Civil Engineering, Isfahan (Khorasgan) Branch, Islamic Azad University) ;
  • Mirdamadi, Hamid Reza (Department of Mechanical Engineering, Isfahan University of Technology) ;
  • Rahgozar, Mohammad Ali (Department of Civil Engineering and Transportation, University of Isfahan)
  • 투고 : 2019.09.16
  • 심사 : 2019.12.26
  • 발행 : 2020.05.25

초록

In this study, a new steel cylindrical shell configuration of the dissipative energy device is proposed to improve lateral ductility and to reduce the damage of the structures against seismic forces. Four nested-eccentric- cylindrical shells are used to constructing this device; therefore, this proposed device is named nested-eccentric-cylindrical shells damper (NECSD). The particular configuration of the nested-eccentric-cylindrical shells is applied to promote the mechanical characteristics, stability, and overall performance of the damper in cyclic loads. Shell-type components are performed as a combination of series and parallel non-linear springs into the in-plan plastic deformation. Numerical analysis with respect to dimensional variables are used to calculate the mechanical characteristics of the NECSD, and full-scale testing is conducted for verifying the numerical results. The parametric study shows the NECSD with thin shells were more flexible, while devices with thick shells were more capacious. The results from numerical and experimental studies indicate that the NECSD has a stable behavior in hysteretic loops with highly ductile performance, and can provide appropriate dissipated energy under cyclic loads.

키워드

참고문헌

  1. ABAQUS Finite Element Analysis Program (2013), "Version 6.13-1", User's Manual.
  2. Abbasnia, R., Vetr, M.G., Ahmadi, R. and Kafi, M.A. (2008), "Experimental and analytical investigation on the steel ring ductility", Sharif J. Sci. Technol., 52, 41-48.
  3. Andalib, Z., Kafi, M.A., Ali Kheyroddin, A., Bazzaz, M. and Momenzadeh, S.B. (2018), "Numerical evaluation of ductility and energy absorption of steel rings constructed from plates", Eng. Struct., 169, 94-106. https://doi.org/10.1016/j.engstruct.2018.05.034.
  4. APL Specification 5L (2000), "American Petroleum Institute, USA.
  5. ATC-24 (1992), "Guidelines for seismic testing of components of steel structures", Applied Technology Council (ATC), Washington D.C., U.S.A.
  6. Bergman, D.M. and Goel, S.C. (1987), "Evaluation of cyclic testing of steel plate devices for added damping and stiffness", Report No. UMCE87-10. Ann Arbor (MI, USA): The University of Michigan, U.S.A.
  7. Castaldo, P. (2014), "Integrated Seismic Design of Structure and Control Systems", Springer, Berlin/Heidelberg, Germany.
  8. Cheraghi, A and Zahrai, S.M. (2016), "Innovative multi-level control system with concentric pipes to reduce seismic response of braced steel frames", J. Constr. Steel Res., 127, 120-137. https://doi.org/10.1016/j.jcsr.2016.07.024.
  9. Chopra, A.K. (1995), "Dynamics of structures: theory and applications to earthquake engineering", Englewood Cliffs (NJ), U.S.A.
  10. Deng, K., Pan, P., Su, Y. and Xue, Y. (2015), "Shape optimization of U-shaped damper for improving its bi-directional performance under cyclic loading", Eng. Struct., 93, 27-35. https://doi.org/10.1016/j.engstruct.2015.03.006.
  11. FEMA 356 (2000), "Prestandard and commentary for the seismic rehabilitation of buildings", Federal Emergency Management Agency (FEMA), Washington D.C., U.S.A.
  12. FEMA 461 (2007), "Interim protocols for determining seismic performance characteristics of structural and nonstructural components", Federal Emergency Management Agency, Washington D.C., U.S.A.
  13. GOST (ГОСТ) 8733 (1976), "Seamless cold and warm deformed pipes", GOST Standards of the Russian Federation, Russia.
  14. Kim, J., Kim, M. and Nour Eldin, M. (2017), "Optimal distribution of steel plate slit dampers for seismic retrofit of structures", Steel Comp. Struct., 4, 473-484. https://doi.org/10.12989/scs.2017.25.4.473.
  15. Liang, Z., Lee, G.C., Dargush, G.F. and Song, J. (2011), "Structural Damping Applications in Seismic Response Modification", CRC Press, Boca Raton, Florida, U.S.A.
  16. Maleki, S. and Bagheri, S. (2010), "Pipe damper, Part I: Experimental and analytical study", J. Constr. Steel Res., 66, 1088-1095. https://doi.org/10.1016/j.jcsr.2010.03.010.
  17. Maleki, S. and Mahjoubi, S. (2013), "Dual-pipe damper", J. Constr. Steel Res, 85, 81-91. https://doi.org/10.1016/j.jcsr.2013.03.004.
  18. Nakagawa, S., Kihara, H., Torii, S., Nakata, Y., Fukuda, K., Iwata, M. and Fujisawa, K. (1996), "Hysteretic behavior of low yield strength steel panel shear wall", 11th World Conference on Earthquake Engineering, Mexico, 171-178.
  19. Plevris, V., Kremmyda, G. and Fahjan, Y. (2017), "Performance-based seismic design of concrete structures and infrastructures", IGI Global, U.S.A.
  20. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), "Displacement based seismic design of structures", IUSS Press, Italy.
  21. Ricky, W.K.C. and Faris, A. (2008), "Experimental study of steel slit damper for passive energy dissipation", Eng. Struct., 30, 1058-1066. https://doi.org/10.1016/j.engstruct.2007.07.005.
  22. Soong, T.T. and Dargush, G.F. (1997), "Passive energy dissipation system in structural engineering", John Wiley and Sons, New York, U.S.A.
  23. Soong, T.T. and Spencer Jr, B.F. (2002), "Supplemental energy dissipation: state-of-the-art and state of-the-practice", Eng. Struct., 24(3), 243-259. https://doi.org/10.1016/S0141-0296(01)00092-X.
  24. Suzuki, K. and Watanabe, A. (2000), "Experimental study of U-shaped steel damper", Summary of technical papers of annual meeting, Architectural Institute of Japan, B-2.
  25. Tagawa, H., Yamanishi, T., Takaki, A. and Chan, R.W.K., (2016), "Cyclic behavior of seesaw energy dissipation system with steel slit dampers", J. Constr. Steel Res., 117, 24-34. https://doi.org/10.1016/j.jcsr.2015.09.014.
  26. Tsai, K., Chen, H., Hong, C. and Su, Y. (1993), "Design of steel triangular plate energy absorbers for seismic-resistant construction", Earthq. Spectra, 9(3), 505-528. https://doi.org/10.1193/1.1585727.
  27. Ventsel, E. and Krauthammer, T. (2001), "Thin Plates and Shells: Theory, Analysis, and Applications", Marcel Dekker, New York, U.S.A.
  28. Vodenitcharova, T. and Ansourian, P. (1998), "Hydrostatic, wind and non-uniform lateral pressure solutions for containment vessels", Thin-Walled Struct., 31, 221-236. https://doi.org/10.1016/S0263-8231(98)00008-1.
  29. Xia, C. Hanson, R. (1992), "Influence of ADAS element parameters on building seismic response", J. Struct. Eng. 118(7) 1903-1918. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:7(1903).
  30. Zahrai, S.M. and Cheraghi, A. (2017), "Improving cyclic behavior of multi-level pipe damper using infill or slit diaphragm inside inner pipe", Struct. Eng. Mech., 64(2), 195-204. https://doi.org/10.12989/sem.2017.64.2.195.
  31. Zhang, C., Aoki, T., Zhang, Q. and Wu, M. (2015), "The performance of low-yield-strength steel shear-panel damper with without buckling", Mat. Struct., 48, 1233-1242. https://doi.org/10.1617/s11527-013-0228-9.