References
- H.R. Habibi Bajguirani, C. Servant, G. Cizeron, TEM investigation of precipitation phenomena occurring in PH 15-5 alloy, Acta Metall. Mater. 41 (1993) 1613-1623. https://doi.org/10.1016/0956-7151(93)90270-3
- H. Dong, M. Esfandiari, X.Y. Li, On the microstructure and phase identification of plasma nitrided 17-4PH precipitation hardening stainless steel, Surf. Coatings Technol. 202 (2008) 2969- 2975. https://doi.org/10.1016/j.surfcoat.2007.10.036
- Hamidreza Riazi, Fakhreddin Ashrafizadeh, Sayed Rahman Hosseini, Reza Ghomashchi, Rong Liu, Characterization of simuitaneous aged and plasma nitride 17-4PH stainless steel, Mater. Charact. 133 (2017) 33-43. https://doi.org/10.1016/j.matchar.2017.09.019
- T. Bell, Y. Sun, A. Suhadi, Environmental and technical aspects of plasma nitrocarburizing, Vacuum. 59 (2000) 14-23. https://doi.org/10.1016/S0042-207X(00)00250-5
- N. Mingolo, A.P. Tschiptschin, C.E. Pinedo, On the formation of expanded austenite during plasma nitriding of an AISI 316L austenitic stainless steel, Surf. Coatings Technol. 201 (2006) 4215-4218. https://doi.org/10.1016/j.surfcoat.2006.08.060
- I. Lee, The Effects of Processing Parameters on Surface Hardening Layer Characteristics of Low Temperature Plasma Nitriding of 316L Austenitic Stainless Steel, J. Korean Inst. Surf. Eng. 52 (2019) 194-202.
- R.L. Liu, M.F. Yan, Improvement of wear and corrosion resistances of 17-4PH stainless steel by plasma nitrocarburizing, Mater. Des. 31 (2010) 2355-2359. https://doi.org/10.1016/j.matdes.2009.11.069
- M.F. Yan, R.L. Liu, Influence of process time on microstructure and properties of 17-4PH steel plasma nitrocarburized with rare earths addition at low temperature, Appl. Surf. Sci. 256 (2010) 6065-6071. https://doi.org/10.1016/j.apsusc.2010.03.121
- A. Barua, H. Kim, I. Lee, Effect of the Amount of CH4 gas on the Characteristics of Surface Layers of Low Temperature Plasma Nitrided Martensitic Precipitation-Hardening Stainless Steel, Surf. Coat. Technol. (2016).
- S. Kim, J.. Yoo, J. Priest, M.. Fewell, Characteristics of martensitic stainless steel nitrided in a low-pressure RF plasma, Surf. Coatings Technol. 163-164 (2003) 380-385. https://doi.org/10.1016/S0257-8972(02)00631-X
- J.R.G. da Silva, R.B. McLellan, Diffusion of carbon and nitrogen in B.C.C. iron, Mater. Sci. Eng. 26 (1976) 83-87. https://doi.org/10.1016/0025-5416(76)90229-9
- C. Li, T. Bell, Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel, Corros. Sci. 46 (2004) 1527-1547. https://doi.org/10.1016/j.corsci.2003.09.015
- H. Baba, T. Kodama, Y. Katada, Role of nitrogen on the corrosion behavior of austenitic stainless steels, Corros. Sci. 44 (2002) 2393-2407. https://doi.org/10.1016/S0010-938X(02)00040-9