DOI QR코드

DOI QR Code

Ballasting plan optimization for operation of a 2D floating dry dock

  • Yoon, Kyungho (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Kim, Hyo-Jin (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Yeo, Seungkyun (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Hong, Younghwa (Institute of Industrial Technology, Samsung Heavy Industries) ;
  • Cha, Jihye (Institute of Industrial Technology, Samsung Heavy Industries) ;
  • Chung, Hyun (Department of Naval Architecture & Ocean Engineering, Chungnam National University)
  • 투고 : 2019.12.18
  • 심사 : 2019.12.26
  • 발행 : 2020.05.25

초록

A floating dry dock is an advanced structure that can provide a solution for dry dock space shortages. The critical point in floating dock operation is compensating the deflection caused by a heavy payload by adjusting the water level in the ballast system. An appropriate ballasting plan warrants safe and precise construction on a floating dock. Particularly, in the case of a 2D floating dock, ballasting plan evaluation is crucial due to complex deformation modes. In this paper, we developed a method to calculate the optimal ballasting plan for accurate and precise construction on a 2D floating dock. The finite element method was used for considering the flexibility of the floating dock as well as the construction blocks. Through a gradient-based optimization algorithm, the optimal ballasting plan for the given load condition was calculated in semi-real time (5 min). The present method was successfully used for the actual construction of an offshore structure on the 2D floating dock.

키워드

과제정보

We thank Professor Phill-Seung Lee at Korea Advanced Institute of Science and Technology (KAIST) for the valuable discussion and comments. This work was performed by the Samsung Heavy Industry (SHI)-KAIST research collaboration program. This work was also supported by the "Human Resources Program in Energy Technology" of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and granted financial resources from the Ministry of Trade, Industry & Energy, Republic of Korea (No. 20184030202000). This research was a part of the project titled 'Development of rapid response technology for oil spill prevention', funded by the Ministry of Oceans and Fisheries, Korea (No.2019044019).

참고문헌

  1. American Bureau of Shipping (2009), Rules for Building and Classing Steel Floating Dry Docks, American Bureau of Shipping, TX, U.S.A.
  2. Bathe, K.J. (2014), Finite Element Procedures, Second Edition, Watertown, Prentice Hall, New Jersey, U.S.A.
  3. China Classification Society (2009), Rules for Classification of Floating Docks, Beijing, China.
  4. Det Norske Veritas (2012), Rules for Classification of Floating Docks, Hovik, Norway.
  5. Germanischer Lloyd (1993), "Rules for Classification and Construction Floating Docks", London, United Kingdom.
  6. Jun, H., Yoon, K. and Lee, P.S. (2018), "The MITC3+ shell element enriched in membrane displacements by interpolation covers", Comput. Methods Appl. Mech. Engrg., 337, 458-480. https://doi.org/10.1016/j.cma.2018.04.007.
  7. Kim, H.J., Yoon, K. and Lee, P.S. (2020), "Continuum mechanics based beam elements for linear and nonlinear analyses of multi-layered composite beams with interlayer slips", Compos. Struct., 235, 111740. https://doi.org/10.1016/j.compstruct.2019.111740.
  8. Ko, Y., Lee, PS. and Bathe, K.J. (2016), "The MITC4+ Shell element and its performance", Comput. Struct., 169, 57-68. https://doi.org/10.1016/j.compstruc.2016.03.002.
  9. Ko, Y., Lee, Y., Lee, P.S. and Bathe, K.J. (2017), "Performance of the MITC3+ and MITC4+ shell elements in widely-used benchmark problems", Comput. Struct., 193, 187-206. https://doi.org/10.1016/j.compstruc.2017.08.003.
  10. Korotaev, V.V., Pantiushin, A.V., Serikova, M.G. and Anisimov, A.G. (2016), "Deflection measuring system for floating dry docks", Ocean Eng., 117, 39-44. https://doi.org/10.1016/j.oceaneng.2016.03.012.
  11. Kurniawan, A. and Ma, G. (2009), "Optimization of ballast plan in launch jacker load-out", Struct. Multidisc. Optim., 38, 267-288. https://doi.org/10.1007/10.1007/s00158-008-0287-7.
  12. Lee, C. and Lee, P.S. (2019), "The strain-smoothed MITC3+ shell finite element", Comput. Struct., 223. https://doi.org/10.1016/j.compstruc.2019.07.005.
  13. Lee, Y.G., Lee, P.S. and Bathe, K.J. (2014), "The MITC3+ shell element and its performance", Comput. Struct., 138, 12-23. https://doi.org/10.1016/j.compstruc.2014.02.005
  14. Lee, Y.G., Yoon, K. and Lee, P.S. (2012), "Improving the MITC3 shell finite element by using the Hellinger-Reissner principle", Comput. Struct., 110-111, 93-106. https://doi.org/10.1016/j.compstruc.2012.07.004.
  15. Lee, P.S. and Bathe, K.J. (2002), "On the asymptotic behavior of shell structures and the evaluation in finite element solutions", Comput. Struct., 80, 235-255. https://doi.org/10.1016/S0045-7949(02)00009-3.
  16. Lee, P.S. and Bathe, K.J. (2004), "Development of MITC isotropic triangular shell finite elements", Comput. Struct., 82, 945-962. https://doi.org/10.1016/j.compstruc.2004.02.004.
  17. Lee, P.S. and Bathe, K.J. (2005), "Insight into finite element shell discretizations by use of the 'basic shell mathematical model'", Comput. Struct., 83, 69-90. https://doi.org/10.1016/j.compstruc.2004.07.005.
  18. Lee, P.S. and Bathe, K.J. (2010), "The quadratic MITC plate and MITC shell elements in plate bending", Adv. Eng. Software, 41, 712-28. https://doi.org/10.1016/j.advengsoft.2009.12.011
  19. Park, K.C., Felippa, C.A. and Rebel, G. (2002), "A simple algorithm for localized construction of non-matching structural interfaces", Int. J. Numer. Methods Eng., 53, 2117-2142. https://doi.org/10.1002/nme.374.
  20. Rao, S.S. (2009), Engineering Optimization: Theory and Practice, Fourth Ed., Wiley, New York, U.S.A. https://doi.org/10.1007/s00158-008-0287-7.
  21. Russian Maritime Register of Shipping (2014), "Rules for Technical Supervision during Construction of Ships and Manufacture of Materials and Products for Ships", Part V Technical Supervision During Construction of Ship, Russian Maritime Register of Shipping, Saint-Petersburg, Russia.
  22. Shan, X.L., Yu, Q. and Tian, J. (2009), "Risk management of mooring operation of floating dock", J. Tianjin Univ., 4, 398-409. https://doi.org/10.3969/j.issn.1008-4339.2002.04.028
  23. Smith, D. and LeVezu, A. (2012), "Floating dock deflection management systems", US Patent 8,155,812, April 10. https://www.google.com/patents/US8155812.
  24. Wang, G.G. and Shan, S. (2006), "Review of metamodeling techniques in support of engineering design optimization", J. Mech. Des., 129, 370-380. https://doi.org/10.1115/1.2429697.
  25. Yang, G., Liang, H. and Wu, C. (2013), "Deflection and inclination measuring system for floating dock based on wireless networks", Ocean Eng., 69,1-8. https://doi.org/10.1016/j.oceaneng.2013.05.014.
  26. Yoon, J.S., Cho, S.P., Jiwinangun, R.G. and Lee, P.S. (2014), "Hydroelastic analysis of floating plates with multiple hinge connections in regular waves", Mar. Struct., 36, 65-87. https://doi.org/10.1016/j.marstruc.2014.02.002.
  27. Yoon, K., Lee, Y.G. and Lee, P.S. (2012), "A continuum mechanics based beam finite element with warping displacements and its modeling capabilities", Struct. Eng. Mech., 43, 411-437. https://doi.org/10.12989/sem.2012.43.4.411.
  28. Yoon, K. and Lee, P.S. (2014a), "Nonlinear performance of continuum mechanics based beam elements focusing on large twisting behaviors", Comput. Methods Appl. Mech. Engrg., 281, 106-130. https://doi.org/10.1016/j.cma.2014.07.023.
  29. Yoon, K. and Lee, P.S. (2014b), "Modeling the warping displacement fields for discontinuously varying arbitrary cross-section beams", Comput. Struct., 131, 56-69. https://doi.org/10.1016/j.compstruc.2013.10.013.
  30. Yoon, K., Lee, P.S. and Kim, D.N. (2015), "Geometrically nonlinear finite element analysis of functionally graded 3D beams considering warping effects", Compos. Struct., 132, 1231-1247. https://doi.org/10.1016/j.compstruct.2015.07.024.
  31. Yoon, K., Lee, P.S. and Kim, D.N. (2017a), "An efficient warping model for elastoplastic torsional analysis of composite beams", Compos. Struct., 178, 37-49. https://doi.org/10.1016/j.compstruct.2017.07.041.
  32. Yoon, K., Kim, D.N. and Lee, P.S. (2017b), "Nonlinear torsional analysis of 3D composite beams using the extended St. Venant solutions", Struct. Eng. Mech., 62, 33-42. https://doi.org/10.12989/sem.2017.62.1.033.