References
- J. Zhang, A review of steel corrosion by liquid lead and leadebismuth, Corros. Sci. 51 (6) (2009) 1207-1227. https://doi.org/10.1016/j.corsci.2009.03.013
- J. Pacio, M. Daubner, F. Fellmoser, K. Litfin, T. Wetzel, Experimental study of heavy-liquid metal (LBE) flow and heat transfer along a hexagonal 19-rod bundle with wire spacers, Nucl. Eng. Des. 301 (2016) 111-127. https://doi.org/10.1016/j.nucengdes.2016.03.003
- J.L. Courouau, P. Trabuc, G. Laplanche, P. Deloffre, P. Taraud, M. Ollivier, R. Adriano, S. Trambaud, Impurities and oxygen control in lead alloys, J. Nucl. Mater. 301 (1) (2002) 53-59. https://doi.org/10.1016/S0022-3115(01)00726-7
- C. Fazio, V. Sobolev, A. Aerts, S. Gavrilov, K. Lambrinou, P. Schuurmans, A. Gessi, P. Agostini, A. Ciampichetti, L. Martinelli, Handbook on Lead-Bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-Hydraulics and Technologies-2015 Edition, Organisation for Economic Co-Operation and Development, 2015.
- J. Lim, G. Manfredi, A. Marien, J. Van den Bosch, Performance of potentiometric oxygen sensors with LSM-GDC composite electrode in liquid LBE at low temperatures, Sens. Actuators B Chem. 188 (2013) 1048-1054.
- L. Martinelli, F. Balbaud-Celerier, A. Terlain, S. Delpech, G. Santarini, J. Favergeon, G. Moulin, M. Tabarant, G. Picard, Oxidation mechanism of a Fe-9Cr-1Mo steel by liquid PbeBi eutectic alloy (Part I), Corros. Sci. 50 (9) (2008) 2523-2536. https://doi.org/10.1016/j.corsci.2008.06.050
-
L. Martinelli, F. Balbaud-Celerier, A. Terlain, S. Bosonnet, G. Picard, G. Santarini, Oxidation mechanism of an Fe-9Cr-1Mo steel by liquid Pb-Bi eutectic alloy at 470
$^{\circ}C$ (Part II), Corros. Sci. 50 (9) (2008) 2537-2548. https://doi.org/10.1016/j.corsci.2008.06.051 - L. Martinelli, F. Balbaud-Celerier, G. Picard, G. Santarini, Oxidation mechanism of a Fe-9Cr-1Mo steel by liquid Pb-Bi eutectic alloy (Part III), Corros. Sci. 50 (9) (2008) 2549-2559. https://doi.org/10.1016/j.corsci.2008.06.049
- I. Hwang, J. Lim, Structural Developments for Lead-Bismuth Cooled Fast Reactors, PEACER and PASCAR, 2010.
- A. Marino, J. Lim, S. Keijers, J. Deconinck, A. Aerts, Numerical modeling of oxygen mass transfer in a wire wrapped fuel assembly under flowing lead bismuth eutectic, J. Nucl. Mater. 506 (2018) 53-62.
- A.G. Churbanov, O. Iliev, V.F. Strizhov, P.N. Vabishchevich, Numerical simulation of oxidation processes in a cross-flow around tube bundles, Appl. Math. Model. 59 (2018) 251-271. https://doi.org/10.1016/j.apm.2018.01.047
- J. Xiong, S. Koshizuka, M. Sakai, Turbulence modeling for mass transfer enhancement by separation and reattachment with two-equation eddy-viscosity models, Nucl. Eng. Des. 241 (8) (2011) 3190-3200. https://doi.org/10.1016/j.nucengdes.2011.06.028
- J. Xiong, X. Cheng, Y. Yang, Numerical investigation on mass transfer enhancement downstream of an orifice, Int. J. Heat Mass Transf. 68 (2014) 366-374. https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.055
- M. van Reeuwijk, M. Hadziabdic, Modelling high Schmidt number turbulent mass transfer, Int. J. Heat Fluid Flow 51 (2015) 42-49. https://doi.org/10.1016/j.ijheatfluidflow.2014.10.025
- A. CFX-Solver, Theory Guide, Release ll, 2006.
- A. Marino, Numerical Modeling of Oxygen Mass Transfer in the MYRRHA System, 2015.
- M. Saito, H. Furuya, M. Sugisaki, Oxidation of SUS-316 stainless steel for fast breeder reactor fuel cladding under oxygen pressure controlled by Ni/NiO oxygen buffer, J. Nucl. Mater. 135 (1) (1985) 11-17. https://doi.org/10.1016/0022-3115(85)90432-5
-
J. Xiong, X. Cheng, Y. Yang, Numerical analysis on supercritical water heat transfer in a 2
$\times$ 2 rod bundle, Ann. Nucl. Energy 80 (2015) 123-134. https://doi.org/10.1016/j.anucene.2015.02.005 - A. stankovskiy, Thermal Power and Neutron Flux Maps of MYRRHA Subcritical Equilibrium Core Design Rev. 1.6, 2017. Internal report SCKCEN/22775186.
- V.H. Graber, M. Rieger, Experimentelle Untersuchung des Warmeubergangs an Flussigmetalle (NaK) in parallel durchstromten Rohrbündeln bei konstanter und exponentieller Warmeflussdichteverteilung, 1972.
- P.A. Ushakov, A.V. Zhukov, N.M. Matyukhin, Heat Transfer to Liquid Metals in Regular Arrays of Fuel Elements, 1978.
- K. Mikityuk, Heat Transfer to Liquid Metal: Review of Data and Correlations for Tube Bundles, 2009.
- X. Cheng, N.-i. Tak, Investigation on turbulent heat transfer to leadebismuth eutectic flows in circular tubes for nuclear applications, Nucl. Eng. Des. 236 (4) (2006) 385-393. https://doi.org/10.1016/j.nucengdes.2005.09.006