References
- Choi, Y. C., Choi, J. S., and Cho, Y. W., (2011), Biomimetic Functional Materials: Find a Solution from Mother Nature, Polymer Science and Technology, The Polymer Society of Korea, Vol. 22, No. 5, pp.460-466.
- Her, K. A., and Kim, C. K., (2010), A study on the Compositional method of Architectural applied of Biomimicry, Proceedings of the Korean Institute of Interior Design, Korean Institute of Interior Design, Vol. 12, No. 1, pp. 132-135.
- Kim, B. Y., (2015), Fabrication of bio-inspired composites that mimic structure of nacre and its characterization, Master's thesis, Hanyang University, pp.5-6.
- Haupt, K., and Mosbach, K., (2000), Molecularly Imprinted Polymers and Their Use in Biomimetic Sensors, Chem, Rev., Vol.100, pp. 2495-2504. https://doi.org/10.1021/cr990099w
- Sarikaya, M., (1994), An introduction to biomimetics: A structural viewpoint, Micro. Res. Tech., Vol.27, pp. 360-375. https://doi.org/10.1002/jemt.1070270503
- Kakisawa, H., and Sumitomo, T., (2011),The toughening mechanism of nacre and structural materials inspired by nacre, Sci. Technol. Adv. Mater., Vol.12, No.6, 064710. https://doi.org/10.1088/1468-6996/12/6/064710
- Kim, J. K., Kim, J. S., Ha, G. J., and Kim, Y. Y., (2007), Tensile and Fiber Dispersion Performance of ECC Produced with Slag Particles, Cement and Concrete Research, Vol. 37, No. 7, pp. 1096-1105. https://doi.org/10.1016/j.cemconres.2007.04.006
- Choi, J. I., Park, S., Bang, B. Y., and Kim, Y. Y., (2018), Tensile Properties of Polyethylene Fiber-Reinforced Highly Ductile Composite with Compressive Strength of 100 MPa Class, Journal of the Korea Concrete institute, Korea Concrete institute, Vol. 30, No. 5, pp. 497-503. https://doi.org/10.4334/JKCI.2018.30.5.497
- Japan Society of Civil Engineers (2008): Recommendations for Design and Construction of High Performance Fiber Reinforced Cement Composites with multiple fine cracks (HPFRCC), Concrete Engineering Series, Vol. Concrete L.
- Kwon, K. S., Bang, J. W., and Kim, Y. Y., (2018), Flexural performance of Multi-layered Fiber-reinforced Cement Composites with Diverse Interface Shape, Journal of the Korea Concrete institute, Korea Concrete institute, Vol. 30, No. 4, pp. 429-435. https://doi.org/10.4334/JKCI.2018.30.4.429
- Nelson, P. K., Li, V. C., and Kamada, C., (2002), Fracture toughness of microfiber reinforced cement composites, Journal of Materials in Civil Engineering, American Society of Civil Engineers, Vol.98, No.5, pp. 384-391. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:5(384)
- Lee, B.Y., Han, B.C., Cho, C.G., and Kim, Y.Y., (2012), Flexural Performance and Fiber Distribution of an Extruded DFRCC Panel, Computers and Concrete, Vol. 10, No. 2, pp. 105-119. https://doi.org/10.12989/cac.2012.10.2.105
- Hyun, J.H., Lee, B.Y., and Kim, Y.Y., (2018), Composite Properties and Micromechanical Analysis of Highly Ductile Cement Composite Incorporating Limestone Powder, Applied Sciences, Vol.8, Issue 2, 151; doi:10.3390/app8020151, 10 pages.
- Shin, K. J., Lee, S.C., and Kim, Y.Y., (2019), High Ductile Fiber Reinforced Concrete with Micro Fibers, Journal of the Korea Institute for Structural Maintenance and Inspection, Korea Institute for Structural Maintenance and Inspection, Vol. 23, No. 2, pp. 92-98.
- Soltan, D. G., Ranande, R., and Li, V. C., (2014), A Bio-inspired Cementitious for High Energy Absorption in Infrastructural Applications, Blucher Material Science Proceedings, MM&FGM 2014, Vol. 1, No. 1.