Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Analytical Study on Flexural Behavior of Concrete Member using Heavyweight Waste Glass as Fine Aggregate

고밀도 폐유리를 잔골재로 사용한 RC 부재의 휨거동에 관한 해석적 연구

  • 차경문 (한국시설안전공단, 안전진단본부) ;
  • 최소영 (강릉원주대학교 방재연구소) ;
  • 김일순 (강릉원주대학교 토목공학과) ;
  • 양은익 (강릉원주대학교 토목공학과)
  • Received : 2019.12.18
  • Accepted : 2020.01.30
  • Published : 2020.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

It were found that the heavyweight waste glass can be used as a construction materials including concrete from previous experimental studies. In this study, in order to evaluate the structural behavior of RC members using heavyweight waste glass as fine aggregate, a flexural behavior test was performed. And then, its results were compared with those obtained from non-linear finite element model analysis. From the results, when the heavyweight waste glass as fine aggregate in RC member, the area of compressive crushing and the number of cracks increased, however, the mean of cracking spacing decreased. Also it had reduced the ductility at high loading stage. For this reason, the same analysis method about the RC member using natural sand as fine aggregate did not predict the initial stiffness, yield load and maximum load on the flexural behavior of the RC members using heavyweight waste glass as fine aggregate. On the other hand, when it is analytically implemented the reduction of neutral axis depth due to developed compression crushing, the results of non-linear finite element analysis could be predicted the experimental results, relatively well.

고밀도 폐유리가 콘크리트를 포함하는 건설 재료로 사용 가능함이 밝혀짐에 따라 본 연구에서는 고밀도 폐유리를 잔골재로 적용한 RC 부재의 구조적 거동을 평가하고자 휨거동 실험을 수행하고 그 결과를 비선형 유한요소해석 결과와 비교 검토하였다. 그 결과, 고밀도 폐유리를 잔골재로 사용하게 되면, 균열 개수가 감소하고 균열 간격 및 압괴 면적이 증가하였다. 또한, 고밀도 폐유리를 잔골재로 대체한 부재는 높은 처짐 단계에서 연성이 감소되었다. 이러한 이유로 천연골재를 사용한 부재와 동일한 방법의 해석 기법은 고밀도 폐유리를 잔골재로 대체한 부재의 휨거동에 대한 초기강성, 항복하중 및 최대하중을 제대로 예측하지 못하는 것으로 나타났으나, 압괴 진전에 따른 중립축 깊이가 감소하는 것을 해석적으로 구현하게 되면, 비선형 유한요소 해석 결과가 실험결과를 비교적 잘 예측하는 것으로 나타났다.

Keywords

References

  1. Cha, K. M. (2017), Characteristics of Flexural Behavior of Reinforced Concrete Members Recycled Heavy weight Industrial Waste Glass as Fine Aggregate (Masters dissertation). Graduate School of Gangneung-Wonjun National University, Gangneung, Korea (in Korean).
  2. Choi, Y. S., Jang. Y. H., Choi, S. Y., Kim, I. S. & Yang, E. I. (2014). Analytical Study on Structural Behavior of Surface Damaged Concrete Member by Calcium Leaching Degradation. Journal of the Korea Institute for Structural Maintenance and Inspection, 18(4), 22-32 (in Korean). https://doi.org/10.11112/jksmi.2014.18.4.022
  3. Choi, S. Y., Choi, Y. S., Won, M. S., & Yang, E. I. (2015). Evaluation on the Applicability of Heavy Weight Waste Glass as Fine Aggregate of Shielding Concrete. Journal of the Korea Institute for Structural Maintenance and Inspection, 19(4), 101-108 (in Korean). https://doi.org/10.11112/jksmi.2015.19.4.101
  4. Choi, S. Y., Choi, Y. S., & Yang, E. I. (2017). Effects of Heavy Weight Waste Glass Recycled as Fine Aggregate on the Mechanical Properties of Mortar Specimens. Annals of Nuclear Energy, 99, 372-382. https://doi.org/10.1016/j.anucene.2016.09.035
  5. Choi, S. Y., Choi, Y. S., & Yang, E. I. (2018). Characteristics of volume change and heavy metal leaching in mortar specimens recycled heavyweight waste glass as fine aggregate. Construction and Building Materials, 165, 424-433 https://doi.org/10.1016/j.conbuildmat.2018.01.050
  6. Choi, S. Y., Kim, I. S., Choi, Y. S., & Yang, E. I. (2019). A study on the applicability of heavyweight waste glass and steel slag as aggregate in heavyweight concrete, Journal of the Korea Institute for Structural Maintenance and Inspection, 23(2), 107-115 (in Korean).
  7. Kang, B. S (2005). Crack Behavior of RC Structures under High Cycle Loading, Journal of the Korean Society for Railway, 8(6) 495-499 (in Korean)
  8. Kim, I. S., Choi, S. Y., & Yang, E. I. (2018). Evaluation of durability of concrete substituted heavyweight waste glass as fine aggregate. Construction and Building Materials, 184, 269-277 https://doi.org/10.1016/j.conbuildmat.2018.06.221
  9. Kim, K. C., Yang. I. H., Joh, C. B. (2016). Material Proeprties and Structural Characteristics on Flexure of Steel Fiber-Reinforced Ultra-High-Performance Concrete. Journal of the Korea Concrete, 28(2), 177-185 (in Korean). https://doi.org/10.4334/JKCI.2016.28.2.177
  10. Kim, Y. M., Choi, S. Y., Kim, I. S., & Yang, E. I. (2018). A study on the Mechanical Properties of Concrete using Electronic Waste as Fine Aggregate. Journal of the Korea Institute for Structural Maintenance and Inspection, 22(2), 90-97 (in Korean). https://doi.org/10.11112/JKSMI.2018.22.2.090
  11. Lee, J. and Fenves, G. L.(1998) Plastic-Damage Model for Cyclic Loading of Concrete Structures, Journal of Engineering Mechanics, 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  12. Lubliner, J., Oliver, J., Oller, S., Onate, E. (1989), A Plastic-Damage Model for Concrete, International Journal of Solids and Structures, 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4
  13. Mehta. P. K. (2014), Concrete structures, properties and materials, 4th Edition, Prentice-Hall, Inc., Englewood cliffs, New jersey, 256-264.
  14. Ministry of Land Infrastructure and Transport of Korea (2014), The fifth aggregate demand and aggregate supply (in Korean).
  15. Seo, H. S., Kim, J. S., Kwon., M. H. (2018). PST Member Behavior Analysis Based on Three-Dimensional Finite Element Analysis According to Load Combination and Thickness of Grouting Layer. Journal of the Korea Institute for Structural Maintenance and Inspection, 22(6), 53-62 (in Korean). https://doi.org/10.11112/JKSMI.2018.22.6.053