References
- W.D. Rhodes, et al., Export Control Guide: Loose Parts Monitoring Systems for Nuclear Power Plants, Oak Ridge National Laboratory, 2012. ORNL/TM-2012/601.
- C.W. Mayo, et al., Loose-Parts Monitoring System Improvements, Electric Power Research Institute, 1988. EPRI NP-5743.
- J. Yang, et al., Detection method of loose parts in nuclear reactor based on eigenvector algorithm, Prog. Nucl. Energy 91 (2016) 250-255. https://doi.org/10.1016/j.pnucene.2016.03.020
- S.H. Shin, Mass estimation of impacting objects against a structure using an artificial neural network without consideration of background noise, Nucl. Eng. Technol. 43 (4) (2011) 343-354. https://doi.org/10.5516/NET.2011.43.4.343
- J.S. Kim, et al., Development of automatic algorithm for localizing loose parts with a steam generator, Nucl. Eng. Des. 219 (2002) 269-276. https://doi.org/10.1016/S0029-5493(02)00281-9
- B.J. Olma, Source location and mass estimation in loose parts monitoring of LWR's, Prog. Nucl. Energy 15 (1985) 583-594. https://doi.org/10.1016/0149-1970(85)90086-1
- S.M. Ziola, Source location in thin plates using cross-correlation, Naval Postgraduate School, Ph. D. Thesis, 1991, pp. 3-8.
- T. Tsunoda, et al., Studies on the loose Part Evaluation technique, Prog. Nucl. Energy 15 (1985) 569-579. https://doi.org/10.1016/0149-1970(85)90084-8
- C.W. Mayo, Loose-Part Mass and energy estimation, Prog. Nucl. Energy 34 (3) (1999) 263-282. https://doi.org/10.1016/S0149-1970(98)00010-9
- S.H. Shin, et al., Markov chain-based mass estimation method for loose Part Monitoring system and its performance, Nucl. Eng. Technol. 49 (2017) 1555-1562. https://doi.org/10.1016/j.net.2017.05.005
- S. Moon, et al., FEA-based metal sphere map for mass estimation of simulated loose part in reactor coolant system, Prog. Nucl. Energy 106 (2018) 357-366. https://doi.org/10.1016/j.pnucene.2018.03.008
- S. Moon, et al., Plate bending wave propagation behavior under metal sphere impact loading, J. Mech. Sci. Technol. 32 (3) (2018) 1117-1124. https://doi.org/10.1007/s12206-018-0214-9
- J. Liska, et al., Localization of loose Part Impacts on the general 3D surface of the nuclear power plant coolant circuit components, Prog. Nucl. Energy 99 (2017) 140-146. https://doi.org/10.1016/j.pnucene.2017.05.004
- Dassault, ABAQUS Version 6.14. User's Manual, Dassault Systems Simulia, 2018.
- C.W. Mayo, Loose-Part Signal properties, Prog. Nucl. Energy 28 (4) (1994) 347-357. https://doi.org/10.1016/0149-1970(94)90011-6
- J.H. Park, An Impact Source Localization Using WignereVille Distribution on Nuclear Power Plant Pressure Boundary Structures, Korea Advanced Institute of Science and Technology, Ph. D. Thesis, 2006.
- H. Sun, et al., Simultaneous identification of structural parameters and dynamic input with incomplete output-only measurements, Struct. Control Health Monit. 21 (6) (2014) 868-889. https://doi.org/10.1002/stc.1619
- H. Sun, et al., A sweeping window method for detection of flaws using an explicit dynamic XFEM and absorbing boundary layers, Int. J. Numer. Methods Eng. 105 (2016) 1014-1040. https://doi.org/10.1002/nme.5006
Cited by
- Impact parameter prediction of a simulated metallic loose part using convolutional neural network vol.53, pp.4, 2021, https://doi.org/10.1016/j.net.2020.10.009
- FEA-Based Ultrasonic Focusing Method in Anisotropic Media for Phased Array Systems vol.11, pp.19, 2021, https://doi.org/10.3390/app11198888