Smart Structures and Systems

  • 제25권5호
  • /
  • Pages.559-567
  • /
  • 2020
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Multiple model switching adaptive control for vibration control of cantilever beam with varying load using MFC actuators and sensors

  • Gao, Zhiyuan (School of Mechatronic Engineering and Automation, Shanghai University) ;
  • Huang, Jiaqi (School of Mechatronic Engineering and Automation, Shanghai University) ;
  • Miao, Zhonghua (School of Mechatronic Engineering and Automation, Shanghai University) ;
  • Zhu, Xiaojin (School of Mechatronic Engineering and Automation, Shanghai University)
  • 투고 : 2019.07.19
  • 심사 : 2019.12.24
  • 발행 : 2020.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Vibration at the tip of various flexible manipulators may affect their operation accuracy and work efficiency. To suppress such vibrations, the feasibility of using MFC actuators and sensors is investigated in this paper. Considering the convergence of the famous filtered-x least mean square (FXLMS) algorithm could not be guaranteed while it is employed for vibration suppression of plants with varying secondary path, this paper proposes a new multiple model switching adaptive control algorithm to implement the real time active vibration suppression tests with a new multiple switching strategy. The new switching strategy is based on a cost function with reconstructed error signal and disturbance signal instead of the error signal from the error sensor. And from a robustness perspective, a new variable step-size sign algorithm (VSSA) based FXLMS algorithm is proposed to improve the convergence rate. A cantilever beam with varying tip mass is employed as flexible manipulator model. MFC layers are attached on both sides of it as sensors and actuators. A co-simulation platform was built using ADAMS and MATLAB to test the feasibility of the proposed algorithms. And an experimental platform was constructed to verify the effectiveness of MFC actuators and sensors and the real-time vibration control performance. Simulation and experiment results show that the proposed FXLMS algorithm based multiple model adaptive control approach has good convergence performance under varying load conditions for the flexible cantilever beam, and the proposed FX-VSSA-LMS algorithm based multiple model adaptive control algorithm has the best vibration suppression performance.

키워드

과제정보

The research described in this paper was financially supported by the National Natural Science Foundation of China (Grant Nos. 51575328, 61503232), "Chen Guang" project supported by Shanghai Municipal Education Commission and Shanghai Education Development Foundation (No. 15CG44).

참고문헌

  1. Ardekani, I.T. and Abdulla, W.H. (2010), "Theoretical convergence analysis of FxLMS algorithm", Signal Process., 90(12), 3046-3055. https://doi.org/10.1016/j.sigpro.2010.05.009
  2. Deraemaeker, A. and Nasser, H. (2010), "Numerical evaluation of the equivalent properties of Macro Fiber Composite (MFC) transducers using periodic homogenization", Int. J. Solids Struct., 47(24), 3272-3285. https://doi.org/10.1016/j.ijsolstr.2010.08.006
  3. Gomathi, K. and Saravanan, V. (2016), "Variable step size for improving convergence of FxLMS algorithm", Procedia Technol., 25, 420-426. https://doi.org/10.1016/j.protcy.2016.08.127
  4. Gripp, J. and Rade, D. (2018), "Vibration and noise control using shunted piezoelectric transducers: a review", Mech. Syst. Signal Process., 112, 359-383. https://doi.org/10.1016/j.ymssp.2018.04.041
  5. Huang, Q., Zhu, X., Gao, Z., Gao, S. and Jiang, E. (2013), "Analysis and implementation of improved multi-input multi-output filtered-X least mean square algorithm for active structural vibration control", Struct. Control Health Monitor., 20(11), 1351-1365. https://doi.org/10.1002/stc.1541
  6. Huang, Q., Chen, S., Huang, M. and Guo, Z. (2017), "Adaptive active noise suppression using multiple model switching strategy", Shock Vib. https://doi.org/10.1155/2017/7289076
  7. Kiang, C.T., Spowage, A. and Yoong, C.K. (2015), "Review of control and sensor system of flexible manipulator", J. Intel. Robot. Syst., 77(1), 187-213. https://doi.org/10.1007/s10846-014-0071-4
  8. Leniowska, L. and Mazan, D. (2015), "MFC sensors and actuators in active vibration control of the circular plate", Arch. Acoust., 40(2), 257-265. https://doi.org/10.1515/aoa-2015-0028
  9. Leva, A. and Piroddi, L. (2011), "FPGA-based implementation of high-speed active noise and vibration controllers", Control Eng. Practice, 19(8), 798-808. https://doi.org/10.1016/j.conengprac.2011.04.006
  10. Li, Y.P., Lee, T.S. and Wu, B.F. (2014), "A variable step-size sign algorithm for channel estimation", Signal Processing, 102, 304-312. https://doi.org/10.1016/j.sigpro.2014.03.030
  11. Ma, C., Zhang, X., Xie, S. and Luo, Y. (2015), "Active linear quadratic Gaussian control of the vibration of a flexible beam with a time-varying mass", Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 229(6), 475-484. https://doi.org/10.1177/0959651815573898
  12. Morgan, D.R. (2013), "History, applications, and subsequent development of the FXLMS Algorithm [DSP History]", IEEE Signal Process. Magaz., 30(3), 172-176. https://doi.org/10.1109/MSP.2013.2242394
  13. Niu, W., Zou, C., Li, B. and Wang, W. (2019), "Adaptive vibration suppression of time-varying structures with enhanced FxLMS algorithm", Mech. Syst. Signal Process., 118, 93-107. https://doi.org/10.1016/j.ymssp.2018.08.009
  14. Pandey, A. and Arockiarajan, A. (2017), "Fatigue study on the sensor performance of macro fiber composite (MFC): Theoretical and experimental approach", Compos. Struct., 174, 301-318. https://doi.org/10.1016/j.compstruct.2017.04.066
  15. Pu, Y., Zhou, H. and Meng, Z. (2019), "Multi-channel adaptive active vibration control of piezoelectric smart plate with online secondary path modelling using PZT patches", Mech. Syst. Signal Process., 120, 166-179. https://doi.org/10.1016/j.ymssp.2018.10.019
  16. Song, G., Sethi, V. and Li, H.N. (2006), "Vibration control of civil structures using piezoceramic smart materials: A review", Eng. Struct., 28(11), 1513-1524. https://doi.org/10.1016/j.engstruct.2006.02.002
  17. Tu, J., Zhang, J., Zhu, Q., Liu, F. and Luo, W. (2018), "The actuation equation of macro-fiber composite coupled plate and its active control over the vibration of plate and shell", Struct. Monitor. Mainten., 5(2), 297-311. https://doi.org/10.12989/smm.2018.5.2.297
  18. Zhang, S.Q., Chen, M., Zhao, G.Z., Wang, Z.X., Schmidt, R. and Qin, X.S. (2017), "Modeling techniques for active shape and vibration control of macro-fiber composite laminated structures", Smart Struct. Syst., Int. J., 19(6), 633-641. https://doi.org/10.12989/sss.2017.19.6.633
  19. Zhao, J., Xu, J., Lo, X.D. and Tian, J. (2007), "An adaptive active noise control algorithm using multiple models", J. Vib. Eng., 20(6), 549-555. https://doi.org/doi:10.3969/j.issn.1004-4523.2007.06.001
  20. Zhao, Z.L., Qiu, Z.C. and Zhang, X.M. (2016), "Vibration control of a pneumatic driven piezoelectric flexible manipulator using self-organizing map based multiple models", Mech. Syst. Signal Process., 70, 345-372. https://doi.org/10.1016/j.ymssp.2015.09.041