References
- Navas, C., Conde, A., Fernandez, B. J., Zubiri, F. and Damborenea, J., "Laser coatings to Improve Wear Resistance of Mould Steel," Surface and Coating Technology, Vol. 194, pp. 136-142, 2005. https://doi.org/10.1016/j.surfcoat.2004.05.002
- Telasang, G., Dutta, Majumdar, J., Padmanabham, G., Tak, M. and Manna, I., "Effect of Laser Parameters on Microstructure and Hardness of Laser Clad and Tempered AISI-H13 Tool Steel," Surface and Coating Technology, Vol. 258, pp. 1108-1118, 2014. https://doi.org/10.1016/j.surfcoat.2014.07.023
- Soeiro, J., Silva, C., Silva M. B. and Martins, P., "Revisiting the Formability Limits by Fracture in Sheet Metal Forming," Journal of Materials Processing Technology, Vol. 217, pp.184-192, 2015. https://doi.org/10.1016/j.jmatprotec.2014.11.009
- Lim, Y., An, T., Ko, S. and Kim, N., "Formability of Coated Vinyl on Sheet Metal during Deep Drawing Process," Journal of Materials Processing Technology, Vol. 227, pp. 178-189, 2016. https://doi.org/10.1016/j.jmatprotec.2015.08.016
- Ke, J., Liu, Y., Zhu, H. and Zhang, Z., "Formability of sheet metal flowing through drawbead-an experimental investigation," Journal of Materials Processing Technology, Vol. 254, pp. 283-293, 2018. https://doi.org/10.1016/j.jmatprotec.2017.11.051
- Suh, J., Victoria-Hernandez, J., Letzig, D., Golle, R. and Volk, W., "Effect of processing route on texture and cold formability of AZ31 Mg alloy sheets processed by ECAP," Materials Science and Engineering: A, Vol. 669, pp. 159-170, 2016. https://doi.org/10.1016/j.msea.2016.05.027
- Shao, Z., Li, N., Lin, J. and Dean, T., "Formability evaluation for sheet metals under hot stamping conditions by a novel biaxial testing system and a new materials model," International Journal of Mechanical Sciences, Vol. 120, pp. 149-158, 2017. https://doi.org/10.1016/j.ijmecsci.2016.11.022
- Gao, T., Liu, Y., Chen, P. and Wang, Z., "Analysis of bulging process of aluminum alloy by overlapping sheet metal and its formability," Transactions of Nonferrous Metals Society of China, Vol. 25, pp. 1050-1055, 2015. https://doi.org/10.1016/S1003-6326(15)63697-4
- Li, H. Z., Li, G. Y., Gao, G. Q., Zhang, W. S. and Wu, X., "A formability evaluation method for sheet metal forming with non-linear strain path change," International Journal of Material Forming, Vol. 11, pp. 199-211, 2018. https://doi.org/10.1007/s12289-017-1342-y
- Liu, J., Peng, Q., Liu, Y. and Wang, Z., “Viscous pressure bulging of aluminium alloy sheet at warm temperatures,” Journal of Mechanical Science and Technology, Vol. 21, No. 10, pp. 1505-1511, 2007. https://doi.org/10.1007/BF03177366
- Hussain, G., Hayat, N. and Lin, G., "Pyramid as test geometry to evaluate formability in incremental forming: Recent results," Journal of Mechanical Science and Technology, Vol. 26, pp. 2337-2345, 2012. https://doi.org/10.1007/s12206-012-0617-y
- Nguyen, D. T. and Kim, Y. S., "Improving formability of tube bending for a copper material using finite element simulation," Journal of Mechanical Science and Technology, Vol. 29, pp. 4205-4211, 2015. https://doi.org/10.1007/s12206-015-0915-2
- Kang, D. M., Hwang, J. K., El-Morsy, A. M. and Manabe, K., "A study on the formability of Magnesium Alloy in warm temperature," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 2, pp. 84-90, 2003.
- Kang, D. and Manabe, K., "Improvement on the Formability of Magnesium Alloy Sheet by Heating and Cooling Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, pp. 66-70, 2005.
- ASTM International (2008), "ASTM E 8/E 8M-08, Standard Test Methods for Tension Testing of Metallic Materials," -Retrieved 2016.
- Stamm, H., Holzwarth, U., Boerman, D. J., Dos Santos, Marques, F., Olciuni, A. and Zausch, R., "Effect of laser surface treatment on high cycle fatigue of AISI 316L Stainless steel," Fatigue & Fracture of Engineering Materials & Structures, Vol. 19, No. 8. pp. 985-995, 1996. https://doi.org/10.1111/j.1460-2695.1996.tb01034.x