한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제19권3호
  • /
  • Pages.8-13
  • /
  • 2020
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

탄소섬유 강화 복합재 가공용 드릴 공구 개발 및 홀 가공성 평가

Development of a Drill Tool for CFRP Machining and Evaluation of Drilling Processing

  • 투고 : 2019.12.24
  • 심사 : 2020.01.14
  • 발행 : 2020.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Carbon fiber-reinforced plastics (CFRPs) are extremely strong and light fiber-reinforced plastics containing carbon fibers. CFRPs can be expensive to produce, but are commonly used wherever high strength-to-weight ratio and rigidity are required, such as in the aerospace, automotive, and ship superstructure industries. In CFRP drilling, the tool performance greatly varies depending on the tool shapes, cutting conditions, and diamond coating. This study developed a new type of tungsten carbide drill with multi-blade edges to evaluate the surface quality of CFRP materials according to the coating thickness of diamond-coated drills. Experiments on tool wear, surface roughness, and burr formation were conducted. The bore exit quality of a 12 mμ -coated drill was better than that of a 6 mμ -coated drill. The superior effects of the 12 mμ -coated drill and the good surface quality of CFRP were also demonstrated.

키워드

참고문헌

  1. Geier, N. and Szalay, T., "Optimisation of Process Parameters for the Orbital and Conventional Drilling of Uni-directional Carbon Fibre-reinforced Polymers (UD-CFRP)," Measurement, Vol. 110, pp. 319-334, 2017. https://doi.org/10.1016/j.measurement.2017.07.007
  2. Ashrafi, S. A., Miller, P. W., Wandro, K. M., and Kim, D., "Characterization and Effects of Fiber Pull-Outs in Hole Quality of Carbon Fiber-Reinforced Plastics Composite," Materials, Vol. 9, No. 10, ma9100828, 2016.
  3. Jia, Z., Fu, R., Niu, B, Qian, B., Bai, Y., and Wang, F., "Novel Drill Structure for Damage Reduction in Drilling CFRP Composites," International Journal of Machine Tools & Manufacture, Vol. 110, pp. 55-65, 2016. https://doi.org/10.1016/j.ijmachtools.2016.08.006
  4. Kwon, D.-J., Wang, Z.-J., Gu, G.-Y., and Park, J -M., "Comparison of Optimum Drilling Conditions of Aircraft CFRP Composites using CVD Diamond and PCD Drills," Composites Research, Vol. 24, No. 4, pp. 23-28, 2011. https://doi.org/10.7234/kscm.2011.24.4.023
  5. Park, D. S. and Jeong, Y. H., “Study on Tool Wear and Cutting Forces by Tool Properties in CFRP Drilling,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 4, pp. 83-88, 2017. https://doi.org/10.14775/ksmpe.2017.16.4.083
  6. Voss, R., Henerichs, M. and Kuster, F., "Comparison of conventional drilling and orbital Drilling in Machining Carbon Fibre Reinforced Plastics," CIRP Annals - Manufacturing Technology, Vol. 65, pp. 137-140, 2016. https://doi.org/10.1016/j.cirp.2016.04.001
  7. Cho, J. H., Yang, D. H., Sa, M. W., and Lee, J. C., “A study on the Wear Characteristics of End Mill for CFRP Processing according to the Tool Materials and Coating Types,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 1, pp. 72-77, 2019. https://doi.org/10.14775/ksmpe.2019.18.1.072