DOI QR코드

DOI QR Code

The effect of gravity and hydrostatic initial stress with variable thermal conductivity on a magneto-fiber-reinforced

  • Said, Samia M. (Department of Mathematics, Faculty of Science, Zagazig University) ;
  • Othman, Mohamed I.A. (Department of Mathematics, Faculty of Science, Zagazig University)
  • 투고 : 2017.06.29
  • 심사 : 2019.11.27
  • 발행 : 2020.05.10

초록

The present paper is concerned at investigating the effect of hydrostatic initial stress, gravity and magnetic field in fiber-reinforced thermoelastic solid, with variable thermal conductivity. The formulation of the problem applied in the context of the three-phase-lag model, Green-Naghdi theory with energy dissipation, as well as coupled theory. The exact expressions of the considered variables by using state-space approaches are obtained. Comparisons are performed in the absence and presence of the magnetic field as well as gravity. Also, a comparison was made in the three theories in the absence and presence of variable thermal conductivity as well as hydrostatic initial stress. The study finds applications in composite engineering, geology, seismology, control system and acoustics, exploration of valuable materials beneath the earth's surface.

키워드

과제정보

The research described in this paper was not financially supported by the Natural Science Foundation.

참고문헌

  1. Abbas, I.A. (2014a), "Three-phase lag model on thermoelastic interaction in an unbounded fiber-reinforced anisotropic medium with a cylindrical cavity", J. Comput. Theor. Nanosci., 11(4), 987-992. https://doi.org/10.1166/jctn.2014.3454
  2. Abbas, I.A. (2014b), "Eigenvalue approach for an unbounded medium with a spherical cavity based upon two-temperature generalized thermoelastic theory", J. Mech. Sci. Tech., 28(10), 4193-4198. https://doi.org/ 10.1007/s12206-014-0932-6
  3. Abbas, I.A., Abd-alla, A.N. and Othman, M.I.A. (2011), "Generalized magneto-thermoelasticity in a fibre-reinforced anisotropic half-space", Int. J. Thermophys., 32(5), 1071-1085. https://doi.org/10.1007/s10765-011-0957-3
  4. Abbas, I.A. and Othman, M.I.A. (2012), "Generalized thermoelastic interaction in a fibre-reinforced anisotropic half-space under hydrostatic initial stress", J. Vib. Control, 18(2), 175-182. https://doi.org/ 10.1177/1077546311402529
  5. Abbas, I.A. and Youssef, H.M. (2013), "Two-temperature generalized thermoelasticity under ramp-type heating by finite element method", Meccanica, 48(2), 331-339. https://doi.org/10.1007/s11012-012-9604-8
  6. Ahmad, F. and Khan, A. (2001), "Effect of rotation on wave propagation in a transversely isotropic medium", Math. Prob. Eng., 7(2), 147-154. http://dx.doi.org/10.1155/S1024123X01001582
  7. Belfield, A.J., Rogers, T.G. and Spencer, A.J.M. (1983), "Stress in elastic plates reinforced by fibre lying in concentric circles", J. Mech. Phys. Solids, 31, 25-54. https://doi.org/10.1016/0022-5096(83)90018-2.
  8. England, A.H. and Rogers, T.G. (1973), "Plane crack problems for ideal fibre-reinforced materials", Q. J. Mech. Appl. Math., 26, 303-320. https://doi.org/doi.org/10.1093/qjmam/26.3.303.
  9. Green, A.E. and Lindsay, K.A. (1972), "Thermoelasticity", J. Elast. 2, 1-7. https://doi.org/10.1007/BF00045689.
  10. Green, A.E. and Naghdi, P.M. (1991), "A re-examination of the basic postulate of thermo-mechanics", Proc. Roy. Soc., London. 432, 171-194. https://doi.org/10.1098/rspa.1991.0012.
  11. Green, A.E. and Naghdi, P.M. (1992), "On undamped heat waves in an elastic solid", J. Therm. Stress., 15, 253-264. https://doi.org/10.1080/01495739208946136.
  12. Green, A.E. and Naghdi, P.M. (1993), "Thermoelasticity without energy dissipation", J. Elast. 31, 189-208. https://doi.org/10.1007/BF00044969.
  13. Hetnarski, R.B. and Ignaczak, J. (1999), "Generalized thermo-elasticity", J. Therm. Stress, 22, 451-476. https://doi.org/10.1080/014957399280832.
  14. Lord, H.W. and Shulman Y. (1967), "A generalized dynamical theory of thermoelasticity", J. Mech. Phys. Solid, 15, 299-309. https://doi.org/10.1016/0022-5096(67)90024-5
  15. Marin, M., Baleanu, D. and Vlase, S. (2017), "Effect of Micro-temperatures for micropolar thermoelastic bodies", Struct. Eng. Mech., 61(3), 381-387. https://doi.org/https://doi.org/10.12989/sem.2017.61.3.381
  16. Marin, M. and Craciun, E.M. (2017), "Uniqueness results for a boundary value problem in dipolar thermoelasticity to model composite materials", Compos. Part B Eng., 126, 27-37. https://doi.org/10.1016/j.compositesb.2017.05.063
  17. Marin, M. and Florea, O. (2014), "On temporal behaviour of solutions in thermoelasticity of porous micro-polr bodies", An. St. Univ. Ovidius Constanta, 22(1), 169-188. https://doi.org/ 10.2478/auom-2014-0014
  18. Marin, M. and Nicaise, S. (2016), "Existence and stability results for thermoelastic dipolar bodies with double porosity", Continuum Mech. Thermodynamics, 28(6), 1645-1657. https://doi.org/10.1007/s00161-016-0503-4
  19. Montanaro, A. (1999), "On singular surface in isotropic linear thermoelasticity with initial stress", J. Acoustical Society America, 106, 1586-1588. https://doi.org/ 10.1121/1.427154.
  20. Noda, N. (1986), Thermal Stresses in Materials with Temperature- Dependent Properties, Thermal Stresses I, R.B. Hetnarski (Editor), North-Holland, Amsterdam.
  21. Othman, M.I.A. and Abbas, I.A. (2011), "Effect of rotation on plane waves at the free surface of a fibre-reinforced thermoelastic half-space using the finite element method", Meccanica, 46(2), 413-421. https://doi.org/10.1007/s11012-010-9322-z
  22. Othman, M.I.A. and Abbas, I.A. (2012), "Generalized thermo-elasticity of thermal-shock problem in a non-homogeneous isotropic hollow cylinder with energy dissipation", Int. J. Thermophys., 33(5), 913-923. https://doi.org/10.1007/s10765-012-1202-4
  23. Othman, M.I.A. and Said, S.M. (2012), "The effect of mechanical force on generalized thermoelasticity in a fiber-reinforced under three theories", Int. J. Thermophys., 33(6), 1082-1099. https://doi.org/10.1007/s10765-012-1203-3
  24. Othman, M.I.A., Abouelregal, A.E. and Said, S.M. (2019), "The effect of variabile thermal conductivity on an infinite fiber-reinforced thick plate under initial stress", J. Mech. Materials Struct., 14(2), 277-293. https://doi.org/10.2140/jomms.2019.14.277.
  25. Othman, M.I.A. and Said, S.M. (2014), "2-D problem of magneto-thermoelasticity fiber-reinforced medium under temperature-dependent properties with three-phase-lag theory", Meccanica, 49(5), 1225-1243. https://doi.org/ 10.1007/s11012-014-9879-z
  26. Othman, M.I.A. and Atwa, S.Y. (2014), "Effect of rotation on a fiber-reinforced thermoelastic under Green-Naghdi theory and influence of gravity", Meccanica, 49(1), 23-36. https://doi.org/10.1007/s11012-013-9748-1
  27. Othman, M.I.A. and Said, S.M. (2015), "The effect of rotation on a fibre-reinforced medium under generalized magneto-thermo-elasticity with internal heat source", Mech. Adv. Materials Struct., 22(3), 168-183. https://doi.org/10.1080/15376494.2012.725508
  28. Othman, M.I.A., Sarkar, N. and Said, S.M. (2013), "Effect of hydrostatic initial stress and gravity field on a fiber-reinforced thermoelastic medium with fractional derivative heat transfer", Multi. Model. Materials Struct., 9(3), 410-426. https://doi.org/10.1108/MMMS-11-2012-0026
  29. Pipkin, A.C. (1973), In Finite Deformations of Ideal Fiber-Reinforced Composites, Edited by G.P. Sendeckyi. Academic Press, New York.
  30. Quintanilla, R. and Racke, R. (2008), "A note on stability in three-phase-lag heat conduction", Int. J. Heat Mass Transfer, 51, 24- 29. https://doi.org/10.1016/j.ijheatmasstransfer.2007.04.045
  31. Roy Choudhuri, S.K. (1984), "Electro-magneto-thermoelastic plane waves in rotating media with thermal relaxation", Int. J. Eng. Sci., 22(5), 519-530. https://doi.org/10.1016/0020-7225(84)90054-5
  32. Said, S.M. and Othman, M.I.A. (2016), "Wave Propagation in a two-temperature fiber-reinforced magneto-thermoelastic medium with three-phase-lag model", Struct. Eng. Mech., 57(2), 201-220. http://dx.doi.org/10.12989/sem.2016.57.2.201
  33. Zenkour, A.M. and Abbas, I.A. (2014), "A generalized thermo- elasticity problem of an annular cylinder with temperature-dependent density and material properties", Int. J. Mech. Sci., 84, 54-60. https://doi.org/10.1016/j.ijmecsci.2014.03.016
  34. Zorammuana, C. and Singh, S.S. (2015), "SH-wave at a plane interface between homogeneous and inhomogeneous fibre-reinforced elastic half-spaces", Ind. J. Materials Sci., 2015, 1-8. http://dx.doi.org/10.1155/2015/532939