DOI QR코드

DOI QR Code

Research on prefabricated concrete beam-column joint with high strength bolt-end plate

  • Shufeng, Li (School of Traffic and Transportation of Xu'chang University) ;
  • Di, Zhao (School of Traffic and Transportation of Xu'chang University) ;
  • Qingning, Li (School of Civil Engineering of Xi'an University of Architecture and Technology) ;
  • Huajing, Zhao (School of Science of Xi'an University of Architecture and Technology) ;
  • Jiaolei, Zhang (School of Civil Engineering of Xi'an University of Architecture and Technology) ;
  • Dawei, Yuan (School of Civil Engineering of Xi'an University of Architecture and Technology)
  • 투고 : 2019.10.28
  • 심사 : 2019.12.14
  • 발행 : 2020.05.10

초록

Many prefabricated concrete frame joints have been proposed, and most of them showed good seismic performance. However, there are still some limitations in the proposed fabricated joints. For example, for prefabricated prestressed concrete joints, prefabricated beams and prefabricated columns are assembled as a whole by the pre-stressed steel bar and steel strand in the beams, which brings some troubles to the construction, and the reinforcement in the core area of the joints is complex, and the mechanical mechanism is not clear. Based on the current research results, a new type of fabricated joint of prestressed concrete beams and confined concrete columns is proposed. To study the seismic performance of the joint, the quasi-static test is carried out. The test results show that the nodes exhibit good ductility and energy dissipation. According to the experimental fitting method and the "fixed point pointing" law, the resilience model of this kind of nodes is established, and compared with the experimental results, the two agree well, which can provides a certain reference for elasto-plastic seismic response analysis of this type of structure. Besides, based on the analysis of the factors affecting the shear capacity of the node core area, the formula of shear capacity of the core area of the node is proposed, and the theoretical values of the formula are consistent with the experimental value.

키워드

참고문헌

  1. AISC (American Institute of Steel Construction) (2016), Prequalified connections for special and intermediate steel moment frames for seismic applications. ANSI/AISC 358-16, Chicago, IL.
  2. CECS:2013 (2013), Technical specification for frame structure of confined RC columns and composite beams.
  3. Chen, W.W. and Li, S.C (2014), "Study on restoring force model of steel-concrete composite joints with extended end-plate connections", World Earthquake Engineering., 30(1), 105-113.
  4. Cheng, P., Miao, X.Y. and Xu, J.W. (2015), "Experimental study on a new type of column-to-beam joints in assembled reinforced concrete frame structures", Industrial Construct., 45(12), 94-98. https://doi.org/10.13204/j.gyjz201512017
  5. Dai, J.Z. (2012), "Experimental Study on Seismic Behaviour of Prefabricated Reinforced Concrete Column to Steel Beam Hybrid Joints", Huaqiao University, Quanzhou, China.
  6. Fan, L. (2010), "Investigation on behavior factor of jointed precast concrete frame structures", Civil Eng. J., 43, 131-136. https://doi.org/10.15951/j.tmgcxb.2010.s2.035
  7. GB50017-2017(2017), Code for design of steel structures.
  8. Guan, D.Z., Guo, Z.X., Yang, H. and Yang, S. (2018), "Restoring force model of precast beam-column connections incorporating beams with grooves and anchored bottom longitudinal bars", J. Southeast University, 48(05), 44-50. https://doi.org/CNKI:SUN:DNDX.0.2018-05-007
  9. He, Y.B. Huang, P., Guo, J., Zhou, H.B., Li, Y. and Li, Y. (2012), "Experimental study on seismic behavior of steel-reinforced concrete square column and steel beam joint with bolted end-plate", J. Building Struct., 33(7), 116-125. https://doi.org/10.14006/j.jzjgxb.2012.07.014
  10. Jiang, H.T., Li, Q.N., Jiang, W.S. and Zhang, D.Y. (2016), "Study on seismic performance of connection joint between prefabricated prestressed concrete beams and high strength reinforcement-confined concrete columns", Steel Compos. Struct., 21(2), 343-356. https://doi.org/10.12989/scs.2016.21.2.343.
  11. Kupfer, H.B. (1969), "Nonlinear behavior of concrete under biaxial stress", J. Eng. Mech. Division ASCE., 99(8), 853-866. https://doi.org/10.14359/7388
  12. Li, X.M., Gao, R.D. and Xu, Q.F. (2013), "Experimental study on high ductile joints for precast RC frame", J. Central South University (Science and Technology)., 44(8), 3453-3463.
  13. Liao, X.D., Hu, X., Ma, R.Q. and Xue,W.C.(2016), "Experimental studies on seismic performance of monolithic precast prestressed concrete frame interior connectionsunder high axial compression ratio", J. Build. Struct., 37(10), 82-89. https://doi.org/10.14006/j.jzjgxb.2016.10.010
  14. Liu, R.R. (2015), "Experimental Study on Seismic Performance of Prestressed Assembling Frame Model of Intermediate Node Structure", Hebei United University, Tangshan, China.
  15. Ma, G.W. (2014), "Study on the combination of nodes connected composite beams and CCSHRC column bolted end plate", Xi'an University of Architecture and Technology, Xi'an, China.
  16. Men, J.J., Li H.J., Wang, X.D., Guan R.R.and Guo, Z.F. (2014), "Research on shear bearing capacity of reinforced concrete column-steel beam composite joint", Build. Struct., 44(6), 74-78. https://doi.org/10.19701/j.jzjg.2014.06.018
  17. Mohammad, Y., Amir, Ti. and Seyed, M.Z. (2016), "Experimental and numerical evaluation of proposed precast concrete connections", Struct. Concrete., 17(6), 959-971. https://doi.org/10.1002/suco.201500168
  18. Parastesh, H., Hajirasouliha, I. and Ramezani, R. (2014), "A new ductile moment-resisting moment-resisting connection for precast concrete frames in seismic regions: An experimental Investigation", Eng. Struct., 70, 144-157. https://doi.org/10.1016/j.engstruct.2014.04.001
  19. Peng, Z. Dai S.B. Liu J.X. and Zhang, Y.C. (2016), "Experimental Research on Seismic Performance of Extended-end-plate Connecting Joint Between T-shaped Concrete-filled Steel Tubular Composite Column and Reinforced Concrete Beam", J. Sichuan University (Engineering Science Edition)., 48(8), 70-77. https://doi.org/10.15961/j.jsuese.2016.04.010
  20. Rattapon, K. and Chayanon, H. (2018), "Seismic performance of interior precast concrete beam-column connections with T-section steel inserts under cyclic loading", Earthq. Eng. Eng. Vib.., 17(2), 355-369. https://doi.org/10.1007/s11803-018-0446-9
  21. Tartaglia R., D'Aniello M. and Rassati G.A. (2019), "Proposal of AISC-compliant seismic design criteria for ductile partially-restrained end-plate bolted joints", J. Construct. Steel Res.., 159, 364-383. https://doi.org/10.1016/j.jcsr.2019.05.006
  22. Tartaglia R., D'Aniello M., Rassati G.A., Swanson J.A. and Landolfo R. (2018), "Full strength extended stiffened end-plate joints: AISC vs recent European design criteria", Eng. Struct., 159, 155-171. https://doi.org/10.1016/j.engstruct.2017.12.053
  23. Tartaglia R., D'Aniello M., Zimbru M. and Landolfo R. (2018), "Finite element simulations on the ultimate response of extended stiffened end-plate joints", Steel Compos. Struct., 27(6), 727-745. https://doi.org/10.12989/scs.2018.27.6.727
  24. Wang, L., Yan, S.J., Zheng, Y. and Zhang C.L. (2014), "Tests on seismic behavior of joints in steel frame with steel-concrete composite beams", J. Harbin Institute of Technol.., 46(4), 1-6. https://doi.org/10.11918/j.issn.0367-6234.2014.04.001
  25. Wu, L.Y. and Chung, L.L. (2005), "Seismic behavior of bolted beam-to-column connections for concrete filled steel tube", J. Construct. Steel Res., 61(10), 1387-1410. https://doi.org/10.1016/j.jcsr.2005.03.007.
  26. Yu, J.B. and Guo, Z.X. (2017), "Experimental study on new precast frame connections under low cyclic loading", Earthq. Eng. Eng. Dynam., 37(05), 141-147. https://doi.org/CNKI:SUN:DGGC.0.2017-05-016/
  27. Zeng, L. (2008), "Research on seismic behaviors and design method of steel reinforced high strength and high performance concrete frame joints", Xi'an University of Architecture and Technology, Xi'an, China. https://doi.org/10.7666/d.d196369.
  28. Zenunovic, D. and Folic R. (2012), "Models for behavior analysis of monolithic wall and precast or monolithic floor slab connections", Eng. Struct., 40, 466-478. https://doi.org/10.1016/j.engstruct.2012.03.007.
  29. Zhang, X.H., Ma, G.W., Ma, H.W. and Jiang, W.S. (2014), "Experiment on End Plate Bolted Connection Node of SC beam and CCSHRC Column", J. Architect. Civil Eng., 31(2), 51-56. https://doi.org/10.3969/j.issn.1673-2049.2014.02.010.

피인용 문헌

  1. Flexural analysis of transverse joints of prefabricated T-girder bridge superstructure vol.77, pp.1, 2020, https://doi.org/10.12989/sem.2021.77.1.089
  2. Flow-based seismic resilience assessment of urban water transmission networks vol.79, pp.4, 2020, https://doi.org/10.12989/sem.2021.79.4.517