DOI QR코드

DOI QR Code

Behaviour and design of Grade 10.9 high-strength bolts under combined actions

  • Li, Dongxu (School of Civil Engineering, The University of Sydney) ;
  • Uy, Brian (School of Civil Engineering, The University of Sydney) ;
  • Wang, Jia (School of Civil Engineering, The University of Sydney) ;
  • Song, Yuchen (School of Civil Engineering, The University of Sydney)
  • 투고 : 2019.06.10
  • 심사 : 2020.02.13
  • 발행 : 2020.05.10

초록

The use of high-strength steel and concrete in the construction industry has been gaining increasing attention over the past few decades. With it comes the need to utilise high-strength structural bolts to ensure the design load to be transferred safely through joint regions, where the space is limited due to the reduced structural dimensions. However, research on the behaviour of high-strength structural bolts under various loading combinations is still insufficient. Most of the current design specifications concerning high-strength structural bolts were established based on a very limited set of experimental results. Moreover, as experimental programs normally include limited design parameters for investigation, finite element analysis has become one of the effective methods to assist the understanding of the behaviour of structural components. An accurate and simple full-range stress-strain model for high-strength structural bolts under different loading combinations was therefore developed, where the effects of bolt fracture was included. The ultimate strength capacities of various structural bolts obtained from the present experimental program were compared with the existing design provisions. Furthermore, design recommendations concerning the pure shear and tension, as well as combined shear and tension resistance of Grade 10.9 high-strength structural bolts were provided.

키워드

과제정보

The first author was financially supported by the Australian Research Council (ARC) under its Discovery Scheme (Project No: DP170100001).

참고문헌

  1. Amrine, J.J. and Swanson, J.A. (2004), "Effects of variable pretension on the behavior of bolted connections with prying," Engineering Journal, American Institute of Steel Construction, 3rd Quarter, 2004.
  2. ANSI/AISC 360-16 (2016), Specification for structural steel buildings. Chicago: AISC.
  3. ASTM Standard F606 (2016), Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets, ASTM International, West Conshohocken, PA, 2003 https://doi.org/DOI: 10.1520/F0606_F0606M-16.
  4. AS 1391 (2007), Metallic materials-Tensile testing at ambient temperature. Standards Australia.
  5. AS 1275 (1985), Metric screw threads for fasteners. Standards Australia.
  6. Bao, Y. and Wierzbicki, T. (2004), "On fracture locus in the equivalent strain and stress triaxiality space", Int. J. Mech. Sci., 46, 81-98. https://doi.org/10.1016/j.ijmecsci.2004.02.006
  7. Cai, Y. and Young, B. (2019), "Experimental investigation of carbon steel and stainless steel bolted connections at different strain rates", Steel Compos. Struct., 30(6), 551-565. https://doi.org/10.12989/scs.2019.30.6.551.
  8. Chesson, E., Faustino, N.L. and Munse, W.H. (1965), "Highstrength bolts subjected to tension and shear", J. Struct. Div. ASCE, 91(5), 155-180.
  9. Coelho, A.M.G., Bijlaard, F. and Simoes da Silva, L. (2004), "Experimental assessment of the ductility of extended end plate connections", Eng. Struct., 26(9), 1185-1206. https://doi.org/10.1016/j.engstruct.2000.09.001.
  10. Coelho, A.M.G. and Bijlaard, F. (2007), "Experimental behaviour of high strength steel end-plate connections", J. Constr. Steel Res., 63: 1228-1240. https://doi.org/10.1016/j.jcsr.2006.11.010.
  11. D'Anello, M., Cassiano, D. and Landolfo, R. (2016), "Monotonic and cyclic inelastic tensile response of European preloadablegr10.9 bolt assemblies", J. Constr. Steel Res., 124: 77-90. https://doi.org/10.1016/j.jcsr.2016.05.017
  12. D'Anello, M., Cassiano, D. and Landolfo, R. (2017), "Simplified criteria for finite element modelling of European preloadable bolts", Steel Compos. Struct., 24(6), 643-658. https://doi.org/10.12989/scs.2017.24.6.643.
  13. Ding, F.X., Yin, G.A., Wang, H.B., Wang, L. and Guo, Q. (2017), "Behavior of headed shear stud connectors subjected to cyclic loading", Steel Compos. Struct., 25(6), 705-716. https://doi.org/10.12989/scs.2017.25.6.705.
  14. Du, Y., Chen, Z., Liew, J.Y.R. and Xiong, M.X. (2017), "Rectangular concrete-filled steel tubular beam-columns using high-strength steel: Experiments and design", J. Constr. Steel. Res., 131, 1-18. https://doi.org/10.1016/j.jcsr.2016.12.016.
  15. Ebrahimi, S., Zahrai, S.M. and Mirghaderi, S.R. (2019), "Numerical study on force transfer mechanism in through gusset plates of SCBFs with HSS columns & beams", Steel Compos. Struct., 31(6), 541-558. https://doi.org/10.12989/scs.2019.31.6.541.
  16. EI-Lobody, E. and Lam, D. (2002), "Modelling of headed stud in steel-precast composite beams", Steel Compos. Struct., 2(5): 355-378. https://doi: 10.12989/scs.2002.2.5.355.
  17. Eurocode 3 (2005), Design of Steel Structures, Part 1.8: Design of joints. BS EN 1993-1-8, (London, UK; 2005).
  18. European Committee for Standardization (CEN) (2005), EN 14399-3-High Strength Structural Bolting for Preloading-Part 3: System HR-Hexagon Bolt and Nut Assemblies.
  19. Francavilla, A., Latour, M., Piluso, V. and Rizzano, G. (2016), "Bolted T-stubs: A refined model for flange and bolt fracture modes", Steel Compos. Struct., 20(2), 267-293. https://doi.org/10.12989/scs.2016.20.2.267.
  20. Grimsmo, E.L., Aalberg, A., Langseth, M. and Clausen, A.H. (2016), "Failure modes of bolt and nut assemblies under tensile loading", J. Constr. Steel. Res., 126, 15-25. https://doi.org/10.1016/j.jcsr.2016.06.023.
  21. Guo, H., Liang, G., Li, Y. and Liu, Y. (2017), "Q690 high strength steel T-stub tensile behavior Experimental research and theoretical analysis", J. Constr. Steel Res., 139, 473-483. https://doi.org/10.1016/j.jcsr.2017.10.007.
  22. Hedayat, A.A., Afzadi, E.A. and Iranpour, A. (2017), "Prediction of the bolt fracture in shear using finite element method", Structures, 12, 188-210. https://doi.org/10.1016/j.istruc.2017.09.005.
  23. Hou, Z., Xia, H. and Zhang, Y. (2012), "Dynamic analysis and shear connector damage identification of steel-concrete composite beams", Steel Compos. Struct., 13(4), 327-341. https://doi.org/10.12989/scs.2012.13.4.327
  24. Hu, Y., Shen, L., Nie, S., Yang, B. and Sha, W. (2016), "FE simulation and experimental tests of high-strength structural bolts under tension", J. Constr. Steel Res., 126, 174-186. https://doi.org/10.1016/j.jcsr.2016.07.021.
  25. Huang, Z., Huang, X., Li, W., Mei, L. and Liew, J.Y.R. (2019), "Experimental behavior of VHSC encased composite stub column under compression and end moment", Steel Compos. Struct., 31(1), 69-83. https://doi.org/10.12989/scs.2019.31.1.069.
  26. ISO (2009), ISO Mechanical properties of fasteners made of carbon steel and alloy steel, Part 1: Bolts, screws and studs with specified property classes-Coarse thread and fine pitch thread.
  27. Kawohl, A.K. and Lange, J. (2016), "Tests on 10.9 bolts under combined tension and shear", Acta Polytechnica, 56(2), 112-117. https://doi.org/10.14311/asfe.2015.050.
  28. Ketabdari, H., Daryan, A.S. and Hassani, N. (2019), "Predicting post-fire mechanical properties of grade 8.8 and 10.9 steel bolts", J. Constr. Steel. Res., 162, 105735. https://doi.org/10.1016/j.jcsr.2019.105735.
  29. Lange, J. and Gonzalez, F. (2012), "Behavior of high-strength grade 10.9 bolts under fire conditions", Struct. Eng. Int., 4, 470-475. https://doi.org/10.2749/101686612X13363929517451
  30. Li, D., Uy, B. and Wang, J. (2019), "Behaviour and design of high-strength steel beam-to-column joints", Steel Compos. Struct., 31(3), 303-317. https://doi.org/10.12989/scs.2019.31.3.303.
  31. Li, D., Uy, B., Patel, V. and Aslani, F. (2016), "Analysis and design of demountable embedded steel column base connections", Steel Compos. Struct., 22(2), 429-448. https://doi.org/10.12989/scs.2016.22.4.753.
  32. Li, D., Uy, B., Patel, V. and Aslani, F. (2018), "Behaviour and design of demountable CFST column-column connections subjected to compression", J. Constr. Steel Res., 141, 262-274. https://doi.org/10.1016/j.jcsr.2017.11.021.
  33. Li, X., Zhou, X., Liu, J. and Wang, X. (2019), "Shear behavior of short square tubed steel reinforced concrete columns with highstrength concrete", Steel Compos. Struct., 32(3), 411-422. https://doi.org/10.12989/scs.2019.32.3.411.
  34. Ling, Y. (1996), "Uniaxial true stress-strain after necking", AMP J. Technol., 5(1), 37-48.
  35. Long, L., Yan, S., Gao, X. and Kang, H. (2016), "Threedimensional finite element simulation and application of highstrength bolts", Steel Compos. Struct., 20(3), 501-512. https://doi.org/10.12989/scs.2016.20.3.501.
  36. Ma, J.L., Chan, T.M. and Young, B. (2018), "Design of coldformed high-strength steel tubular stub columns", J. Struct. Eng., 144(6), 04018063. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002046.
  37. Nah, H.S. and Choi, S.M. (2017), "Estimation on clamping load of high strength bolts considering various environment conditions", Steel Compos. Struct., 24(4), 399-408. https://doi.org/10.12989/scs.2017.24.4.399.
  38. Nair, R.S., Birkemoe, P.C. and Munse, W.H. (1974). "High strength bolts subject to tension and prying," J. Struct. Div., ASCE, 100(2), 351-372. https://doi.org/10.1061/JSDEAG.0003712
  39. Pavlovic, M., Markovic, Z., Veljkovic, M. and Buđevc, D. (2013), "Bolted shear connectors vs. headed studs behaviour in pushout tests", J. Constr. Steel. Res., 88, 134-149. https://doi.org/10.1016/j.jcsr.2013.05.003.
  40. Qi, J., Wang, J., Li, M. and Chen, L. (2017), "Shear capacity of stud shear connectors with initial damage: Experiment, FEM model and theoretical formulation", Steel Compos. Struct., 25(1), 79-92. https://doi.org/10.12989/scs.2017.25.1.079.
  41. Rehman, N., Lam, D., Dai, X. and Ashour, A.F. (2016), "Experimental study on demountable shear connectors in composite slabs with profiled decking", J. Constr. Steel. Res., 122, 178-189. https://doi.org/10.1016/j.jcsr.2016.03.021.
  42. Renner, A. and Lange, J. (2012), "Load-bearing behavior of highstrength bolts in combined tension and shear", Steel Constr., 5(3), 151-157. https://doi.org/10.1002/stco.201210019.
  43. Ribeiro, J., Santiago, A., Rigueiro, C. and Simoes da Silva, L. (2015), "Analytical model for the response of T-stub joint component under impact loading", J. Constr. Steel Res., 106, 23-34. https://doi.org/10.1016/j.jcsr.2014.11.013.
  44. Shamass, R. and Cashell, K.A. (2017), "Behaviour of composite beams made using high strength steel", Structures, 12, 88-101. https://doi.org/10.1016/j.istruc.2017.08.005.
  45. Shi, Y., Wang, M. and Wang, Y. (2011), "Analysis on shear behaviour of high-strength bolts connection", Int. J. Steel Struct., 11(2), 203-213. https://doi.org/10.1007/s13296-011-2008-0.
  46. Song, Y., Wang, J., Uy, B. and Li, D. (2020), "Experimental behaviour and fracture prediction of austenitic stainless steel bolts under combined tension and shear", J. Constr. Steel Res., 166, 105916. https://doi.org/10.1016/j.jcsr.2019.105916.
  47. Sterling, G.H. and Fisher, J.W. (1964). "Tests of A490 Bolts." Fritz Engineering Lab. Report, No. 288.15, Lehigh University.
  48. Standards Australia, AS 4100-1998: Steel structures, 2016.
  49. Thai, H.T., Vo, T.P., Nguyen, T.K. and Pham, C.H. (2017), "Explicit simulation of bolted endplate composite beam-to-CFST column connections", Thin-Wall. Struct., 119, 749-759. https://doi.org/10.1016/j.tws.2017.07.013.
  50. Toribio, J. and Ayaso, F.J. (2003). "A fracture criterion for highstrength steel structural members containing notch-shape defects". Steel Compos. Struct., 3(4), 231-242. https://doi.org/10.12989/scs.2003.3.4.231.
  51. Uy, B. (2001), "Strength of short concrete filled high strength steel box columns", J. Constr. Steel. Res., 57, 113-134. https://doi.org/10.1016/S0143-974X(00)00014-6.
  52. Vasdravellis, G., Karavasilis, T.L. and Uy, B. (2014), "Design rules, experimental evaluation, and fracture models for highstrength and stainless-steel hourglass shape energy dissipation devices", J. Struct. Eng., 140(11), 04014087. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001014.
  53. Wang, F., Zhao, O. and Young, B. (2020), "Testing and numerical modelling of S960 ultra-high strength steel angle and channel section stub columns", Eng. Struct., 204, 109902. https://doi.org/10.1016/j.engstruct.2019.109902.
  54. Wang, J. and Sun, Q. (2019), "Seismic behavior of Q690 circular HCFTST columns under constant axial loading and reversed cyclic lateral loading", Steel Compos. Struct., 32(2), 199-212. https://doi.org/10.12989/scs.2019.32.2.199.
  55. Wang, J., Uy, B., Thai, H.T. and Li, D. (2018), "Behaviour and design of demountable beam-to-column composite bolted joints with extended end-plates", J. Constr. Steel Res., 144, 221-235. https://doi.org/10.1016/j.jcsr.2018.02.002.
  56. Yan, J. B., Wang, Z., Wang, T. and Wang, X.T. (2018), "Shear and tensile behaviors of headed stud connectors in double skin composite shear wall", Steel Compos. Struct., 26(6), 759-769. https://doi.org/10.12989/scs.2018.26.6.759.
  57. Yang, J., Sheehan, T., Dai, X. and Lam, D. (2017), "Structural behaviour of beam to concrete-filled elliptical steel tubular column connections", Structures, 9, 41-52. https://doi.org/10.1016/j.istruc.2016.09.005.
  58. Zhao, H. and Yuan, Y. (2010), "Experimental studies on composite beams with high-strength steel and concrete", Steel Compos. Struct., 10(5), 373-383. https://doi.org/10.12989/scs.2010.10.5.373.