한국지진공학회논문집 (Journal of the Earthquake Engineering Society of Korea)

  • 제24권2호
  • /
  • Pages.67-76
  • /
  • 2020
  • /
  • 1226-525X(pISSN)
  • /
  • 2234-1099(eISSN)
한국지진공학회 (Earthquake Engineering Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

El-centro 지진파형을 이용한 CAFB의 최적화 및 교량 지진응답실험에 관한 연구

A Study on the Optimization and Bridge Seismic Response Test of CAFB Using El-centro Seismic Waveforms

  • 허광희 (건양대학교 해외건설플랜트학과) ;
  • 이진옥 (충남대학교 토목공학과) ;
  • 서상구 (충남도립대학교 건설정보과) ;
  • 박진용 (건양대학교 재난안전공학과대학원) ;
  • 전준용 (건양대학교 재난안전공학과대학원)
  • Heo, Gwang Hee (Department of International Civil and Plant Engineering, Konyang University) ;
  • Lee, Chin Ok (Department of Civil Engineering, Chungnam National University) ;
  • Seo, Sang Gu (Department of Civil Engineering and Informatics, Chungnam State University) ;
  • Park, Jin Yong (Department of Disaster Management Engineering, Konyang University) ;
  • Jeon, Joon Ryong (Department of Disaster Management Engineering, Konyang University)
  • 투고 : 2020.01.02
  • 심사 : 2020.01.21
  • 발행 : 2020.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study aims to optimize the cochlea-inspired artificial filter bank (CAFB) using El-Centro seismic waveforms and test its performance through a shaking table test on a two-span bridge model. In the process of optimizing the CAFB, El-Centro seismic waveforms were used for the purpose of evaluating how they would affect the optimizing process. Next, the optimized CAFB was embedded in the developed wireless-based intelligent data acquisition (IDAQ) system to enable response measurement in real-time. For its performance evaluation to obtain a seismic response in real-time using the optimized CAFB, a two-span bridge (model structures) was installed in a large shaking table, and a seismic response experiment was carried out on it with El-Centro seismic waveforms. The CAFB optimized in this experiment was able to obtain the seismic response in real-time by compressing it using the embedded wireless-based IDAQ system while the obtained compressed signals were compared with the original signal (un-compressed signal). The results of the experiment showed that the compressed signals were superior to the raw signal in response performance, as well as in data compression effect. They also proved that the CAFB was able to compress response signals effectively in real-time even under seismic conditions. Therefore, this paper established that the CAFB optimized by being embedded in the wireless-based IDAQ system was an economical and efficient data compression sensing technology for measuring and monitoring the seismic response in real-time from structures based on the wireless sensor networks (WSNs).

키워드

참고문헌

  1. Sohn H, Farrar R, Hemez H, Czarnecki J. A Review of Structural Health Monitoring Literature: 1996-2001. Los Alamos National Laboratory. 2002 Apr;7-12.
  2. Wong KY. Instrumentation and Health Monitoring of Cable-supported Bridge. Structural Control and Health Monitoring. 2004 Apr/Jun;11(2):91-124. https://doi.org/10.1002/stc.33
  3. Jang S, Jo H, Mechitov K, Rice JA, Sim SH, Jung HJ, Yun CB, Spencer Jr BF, Agha G. Structural Health Monitoring of a Cablestayed Bridge using Smart Sensor Technology: Deployment and Evaluation. Smart Structures and System. 2010 Jul;6(5-6):439-459. https://doi.org/10.12989/sss.2010.6.5_6.439
  4. Na WS, Baek J. Impedance-Based Non-Destructive Testing Method Combined with Unmanned Aerial Vehicle for Structural Health Monitoring of Civil Infrastructures. Applied Sciences. 2017 Jul;7(1):15-23. https://doi.org/10.3390/app7010015
  5. Lee YJ, Cho S. SHM-Based Probabilistic Fatigue Life Prediction for Bridges Based on FE Model Updating. Sensors. 2016 Mar;16(3):317-331. https://doi.org/10.3390/s16030317
  6. Abe M, Fujino Y. Bridge Monitoring in Japan, Encyclopedia of Structural Health Monitoring. John Wiley and Sons. c2009.
  7. Koh HM, Lee HS, Kim S, Choo JF. Monitoring of Bridge in Korea, Encyclopedia of Structural Health Monitoring. John Wiley and Sons. c2009.
  8. Baptista FG, Budoya DE, Almeida VAD, Ulson JAC. An Experimental Study on the Effect of Temperature on Piezoelectric Sensors for Impedance-Based Structural Health Monitoring. Sensors. 2014 Jan;14(1):1208-1227. https://doi.org/10.3390/s140101208
  9. Salmanpour MS, Khodaei ZS, Aliabadi MH. Impact Damage Localisation with Piezoelectric Sensors under Operational and Environmental Conditions. Sensors. 2017 May;17(5):1178-1195. https://doi.org/10.3390/s17051178
  10. Lamonaca F, Sciammarella PF, Scuro C, Carni DL, Olivito RS. Synchronization of IoT Layers for Structural Health Monitoring. 2018 Workshop on Metrology for Industry 4.0 and IoT. 2018 Apr; 89-94.
  11. Scuro C, Sciammarella PF, Lamonaca F, Olivito RS, Carni DL. IoT for Structural Health Monitoring. IEEE Instrumentation and Measurement Magazine. 2018 Dec;21(6):4-14. https://doi.org/10.1109/MIM.2018.8573586
  12. Aktan AE, Catbas FN, Grimmelsman KA, Pervizpour M. Development of a Model Health Monitoring Guide for Major Bridges. Drexel Intelligent Infrastructure and Transportation Safety Institute. c2003.
  13. Peeters B, Couvreur G, Razinkov O, Kundig C. Continuous Monitoring of the Oresund Bridge: System and Data Analysis. In Proceedings of IMAC 21, International Modal Analysis Conference, Kissimmee, Florida, USA. c2003.
  14. Ko JM, Ni YQ. Technology Developments in Structural Health Monitoring of Large-scale Bridges. Engineering Structures. 2005 Oct;27(12):1715-1725. https://doi.org/10.1016/j.engstruct.2005.02.021
  15. Ko JM, Ni YQ. Structural Health Monitoring and Intelligent Vibration Control of Cable-Supported Bridge: Research and Application. KSEC Journal of Civil Engineering. 2003 Nov;7(6):701-716. https://doi.org/10.1007/BF02829139
  16. Carni DL, Scuro C, Lamonaca F, Olivito RS, Grimaldi D. Damage Analysis of Concrete Structures by Means of Acoustic Emissions Technique. Composites Part B: Engineering. 2017 Apr;115(15):79-86. https://doi.org/10.1016/j.compositesb.2016.10.031
  17. L amonaca F, C arrozzini A, G rimaldi D, O livito R S. Improved Monitoring of Acoustic Emissions in Concrete Structures by Multitriggering and Adaptive Acquisition Time Interval. Measurement. 2015 Jan;59:227-236. https://doi.org/10.1016/j.measurement.2014.09.053
  18. Lamonaca F, Carrozzini A, Grimaldi D, Olivito RS. Improved Accuracy of Damage Index Evaluation in Concrete Structures by Simultaneous Hardware Triggering. Metrology and Measurement Systems. 2014 May;21(2):341-350. https://doi.org/10.2478/mms-2014-0029
  19. Heo G, Jeon J. A Smart Monitoring System Based on Ubiquitous Computing Technique for Infra-Structural System: Centering on Identification of Dynamic Characteristics of Self-Anchored Suspension Bridge. KSCE Journal of Civil Engineering. 2009 Sep;13(5):333-337. https://doi.org/10.1007/s12205-009-0333-z
  20. Lynch PJ. An Overview of Wireless Structural Health Monitoring for Civil Structures. Philosophical Transactions of the Royal Society A. 2006 Dec;365(1851):345-372. https://doi.org/10.1098/rsta.2006.1932
  21. Zhang J, Tian GY, Marindra AMJ, Sunny AI, Zhao AB. A Review of Passive RFID Tag Antenna-Based Sensors and Systems for Structural Health Monitoring Applications. Sensors. 2017 Feb;17(2):265-297. https://doi.org/10.3390/s17020265
  22. Park JW, Sim SH, Jung HJ, Spencer BF. Development of a Wireless Displacement Measurement System Using Acceleration Responses. Sensors. 2013 Jul;13(7):8377-8392. https://doi.org/10.3390/s130708377
  23. Hao J, Zhang B, Jiao Z, Mao S. Adaptive Compressive Sensing Based Sample Scheduling Mechanism for Wireless Sensor Networks. Pervasive and Mobile Computing. 2015 Sep;22:113-125. https://doi.org/10.1016/j.pmcj.2015.02.002
  24. Huang Y, Beck JL, Wu S, Li H. Bayesian Compressive Sensing for Approximately Sparse Signals and Application to Structural Health Monitoring Signals for Data Loss Recovery. Probabilistic Engineering Mechanics. 2016 Oct;46:62-79. https://doi.org/10.1016/j.probengmech.2016.08.001
  25. Peckens CA, Lynch JP. Utilizing the Cochlea as a Bio-inspired Compressive Sensing Technique. Smart Materials and Structures. 2013 Sep;22(10):105027. https://doi.org/10.1088/0964-1726/22/10/105027
  26. Peckens CA, Lynch JP, Heo G. Resource-efficient Wireless Sensor Network Architecture Based on Bio-mimicry of the Mammalian Auditory System. Intelligent Material Systems and Structures. 2015 Feb;26(1):79-100. https://doi.org/10.1177/1045389X14521877
  27. Heo G, Jeon J. A Study on the Data Compression Technology-based Intelligent Data Acquisition (IDAQ) System for Structural Health Monitoring of Civil Structures. Sensors. 2017 Jul;17(7):1620. https://doi.org/10.3390/s17071620
  28. Angrisani L, Schiano Lo Moriello R, Bonavolonta F, Gallucci L, Menna C, Asprone D, Fabbrocino F. An Innovative Embedded Wireless Sensor Network System for the Structural Health Monitoring of RC Structures. 2017 IEEE 3rd International Forum on Research and Technologies for Society and Industry(RTSI), Conference Proceedings. c2017.
  29. Gallucci L, Menna C, Angrisani L, Asprone D, Lo Moriello RS, Bonavolonta F, Fabbrocino F. An Embedded Wireless Sensor Network with Wireless Power Transmission Capability for the Structural Health Monitoring of Reinforced Concrete Structures. Sensors .2017 Nov;17(11):2566. https://doi.org/10.3390/s17112566