Coupled systems mechanics

  • 제9권2호
  • /
  • Pages.91-110
  • /
  • 2020
  • /
  • 2234-2184(pISSN)
  • /
  • 2234-2192(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Review of Resilience-Based Design

  • Ademovic, Naida (University of Sarajevo, Faculty of Civil Engineering) ;
  • Ibrahimbegovic, Adnan (Laboratoire Roberval, Universite de Technologie de Compiegne/Sorbonne Universites)
  • 투고 : 2020.01.11
  • 심사 : 2020.04.01
  • 발행 : 2020.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The reliability of structures is affected by various impacts that generally have a negative effect, from extreme weather conditions, due to climate change to natural or man-made hazards. In recent years, extreme loading has had an enormous impact on the resilience of structures as one of the most important characteristics of the sound design of structures, besides the structural integrity and robustness. Resilience can be defined as the ability of the structure to absorb or avoid damage without suffering complete failure, and it can be chosen as the main objective of design, maintenance and restoration for structures and infrastructure. The latter needs further clarification (which is done in this paper), to achieve the clarity of goals compared to robustness which is defined in Eurocode EN 1991-1-7 as: "the ability of a structure to withstand events like fire, explosions, impact or the consequences of human error, without being damaged to an extent disproportionate to the original cause". Many existing structures are more vulnerable to the natural or man-made hazards due to their material deterioration, and a further decrease of its loadbearing capacity, modifying the structural performance and functionality and, subsequently, the system resilience. Due to currently frequent extreme events, the design philosophy is shifting from Performance-Based Design to Resilience-Based Design and from unit to system (community) resilience. The paper provides an overview of such design evolution with indicative needs for Resilience-Based Design giving few conducted examples.

키워드

참고문헌

  1. Ademovic, N (2011), "Structural and seismic behavior of typical masonry buildings from Bosnia and Herzegovina", A.MSc. Dissertation, University of Minho, Guimaraes.
  2. Ademovic, N. (2012), "Behavior of masonry structures in Bosnia and Herzegovina at the effect of earthquakes from the viewpoint of modern theoretical and experimental knowledge", Ph.D. Dissertation, Faculty of Civil Engineering, University of Sarajevo, Sarajevo.
  3. Ademovic, N., Hrasnica, M. and Oliveira, D.V. (2013), "Pushover analysis and failure pattern of a typical masonry residential building in Bosnia and Herzegovina", Eng. Struct., 50, 13-29. https://doi.org/10.1016/j.engstruct.2012.11.031.
  4. Ademovic, N., Keder, A. and Mahlev, M. (2019), "Application of a quality control plans on a truss bridge (2019), advanced technologies, systems, and applications IV", Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT), Sarajevo, Bosnia and Herzegovina, October.
  5. Amini, M.A. and Poursha, M. (2018), "Adaptive force-based multimode pushover analysis for seismic evaluation of midrise buildings", J. Struct. Eng., 144(8), 04018093. https://doi:10.1061/(asce)st.1943-541x.0002070.
  6. ASCE (2018), Advocating for Performance-Based Design Report to the Structural Engineering Institute Board of Governors, Task Committee on Performance-Based Design, April.
  7. Aschheim, M.A. and Black, E.F. (2000) "Yield point spectra for seismic design and rehabilitation", Earthq. Spectra, 16(2), 317-336. https://doi.org/10.1193/1.1586115.
  8. ATC 40 (1996), Seismic Evaluation and Retrofit of Existing Concrete Buildings, Applied Technology Council, Redwood City, CA.
  9. ATC 63 (2007), Recommended Methodology for Quantification of Building System Performance and Response Parameters-75% Interim Draft Report, Applied Technology Council, Redwood City, CA.
  10. Bracci, J.M., Kunnath, S.K. and Reinhorn, A.M. (1997), "Seismic performance and retrofit evaluation of reinforced concrete structures", J. Struct. Eng., 123(1), 3-10. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:1(3).
  11. Browning, J.P. (2001), "Proportioning of earthquake-resistant RC building structures", J. Struct. Div., ASCE, 127(2), 145-151. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(145).
  12. Bruneau, M. and Reinhorn, A. (2007), "Exploring the concept of seismic resilience for acute care facilities", Earthq. Spectra, 23(1), 41-62. https://doi.org/10.1193/1.2431396.
  13. Bruneau, M., Chang, S., Eguchi, R., Lee, G., O'Rourke, T., Reinhorn, A., Shinozuka, M., Tierney, K., Wallace, W. and von Winterfeldt, D. (2003), "A framework to quantitatively assess and enhance the seismic resilience of communities", Earthq. Spectra, 19(4), 733-752. https://doi.org/10.1193/1.1623497.
  14. CEN (2004), Eurocode 8: Design Provisions for Earthquake Resistance of Structures, Part 1.1: General Rules, Seismic Actions and Rules for Buildings, EN1998-1, European Committee for Standardisation.
  15. Chopra, A.K. and Goel, R.K. (1999), "Capacity-demand-diagram methods based on inelastic design spectrum", Earthq. Spectra, 15(4), 637-656. https://doi.org/10.1193/1.1586065.
  16. Chopra, A.K. and Goel, R.K. (2001), "Direct displacement-based design: use of inelastic vs. elastic design spectra", Earthq. Specta, 17(1), 47-65. https://doi.org/10.1193/1.1586166.
  17. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. D., 31, 561-582. https://doi.org/10.1002/eqe.144.
  18. Cimellaro, G.P, Reinhorn, A.M. and Bruneau, M. (2010c), "Framework for analytical quantification of disaster resilience", Eng. Struct., 32(11), 3639-3649. https://doi.org/10.1016/j.engstruct.2010.08.008.
  19. Cimellaro, G.P. (2013), "Resilience-Based Design (RBD) modelling of civil infrastructure to assess seismic hazards", Handbook of Seismic Risk Analysis and Management of Civil Infrastructure Systems, 268-303.
  20. Cimellaro, G.P., Christovasilis, I.P., Reinhorn, A.M., De Stefano, A. and Kirova, T. (2010a), "L'Aquila earthquake of April 6th, 2009 in Italy: rebuilding a resilient city to multiple hazards", MCEER Technical Report-MCEER-10-0010, State University of New York at Buffalo (SUNY), Buffalo.
  21. Cimellaro, G.P., Fumo, C., Reinhorn, A.M. and Bruneau, M. (2009), "Quantification of seismic resilience of health care facilities MCEER", Technical Report-MCEER-09-0009, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.
  22. Cimellaro, G.P., Reinhorn, M.A. and Bruneau, M. (2006), "Quantification of seismic resilience", Proceedings of the 8th US National Conference on Earthquake Engineering, San Francisco, CA, USA, April.
  23. Cimellaro, G.P., Reinhorn, M.A. and Bruneau, M. (2010b), "Seismic resilience of a hospital system", Struct. Infrastr. E, 6(1-2), 127-144. https://doi.org/10.1080/15732470802663847.
  24. Cimellaro, G.P., Renschler, C. and Bruneau, M. (2015), "Introduction to Resilience-Based Design (RBD)", Eds. Cimellaro, G., Nagarajaiah, S., Kunnath, S., Computational Methods, Seismic Protection, Hybrid Testing and Resilience in Earthquake Engineering. Geotechnical, Geological and Earthquake Engineering, 33, Springer, Cham.
  25. Clough, R.W. and Penzien, J. (2016), Dynamics of Structures, CSI Berkeley, California, USA.
  26. Cornell, A. and Krawinkler, H. (2000), "Progress and challenges in seismic performance and assessment", PEER Center News, 3(2), 1-3.
  27. Faber, M.H. (2015), "Codified risk informed decision making for structures", Proceedings of the Symposium on Reliability of Engineering System, SRES, Hangzhou, China, October.
  28. FEMA 356 (2000), "Pre standard and commentary for the seismic rehabilitation of buildings", Federal Emergency Management Agency, Washington, DC.
  29. FEMA 440 (2005), "Improvement of non-linear static procedures", Applied Technology Council (ATC 55), Washington, DC.
  30. Freeman, S.A. (1978), "Prediction of response of concrete buildings to severe earthquake motion", ACI Special Publication SP-55, 589-605.
  31. Freeman, S.A. (1998), "The capacity spectrum method, as a tool for seismic design", Proceedings of the 11th European Conference on Earthquake Engineering, Paris, France, September.
  32. Goel, S.C., Liao, W.C., Mohammed, R.B. and Chao, S.H. (2010), "Performance-based plastic design method for earthquake-resistant structures: An overview", Struct. Des. Tall Spec., 19(1-2), 115-137. https://doi.org/10.1002/tal.547.
  33. Henry, D. and Ramirez-Marquez, J.E. (2012) "Generic metrics and quantitative approaches for system resilience as a function of time", Reliab. Eng. Syst. Saf., 99, 114-122. https://doi.org/10.1016/j.ress.2011.09.002.
  34. Ibrahimbegovic, A. and Ademovic, N. (2019), Dynamics of Structures Under Extreme Transient Loads, 1st Edition, CRC Press, Taylor & Francis Group, LLC.
  35. Ibrahimbegovic, A., Hajdo, E. and Dolarevic, S. (2013), "Linear instability or buckling problems for mechanical nd coupled thermomechanical extreme conditions", Coupl. Syst. Mech., 2(4), 349-374. http://dx.doi.org/10.12989/csm.2013.2.4.349.
  36. Ibrahimbegovic, A., Kassiotis, C. and Niekamp, R. (2016), "Fluid-structure interaction problems solution by operator split methods and efficient software development by code-coupling", Coupl. Syst. Mech., 5(2), 145-156. http://dx.doi.org/10.12989/csm.2016.5.2.145.
  37. ISO (International Organization for Standardization) (2015), General Principles on Reliability of Structures, ISO 2394.
  38. Kappos, A.J. and Manafpour, A. (2001), "Seismic design of R/C buildings with the aid of advanced analytical techniques", Eng. Struct., 23(4), 319-322. https://doi.org/10.1016/S0141-0296(00)00052-3.
  39. Khaloo, A.R. and Mobini, M.H. (2015), "Towards resilient structures", Sci. Iranica Trans., 23(5), 2077-2080. https://doi.org/10.24200/sci.2016.2272
  40. Krawinkler, H. and Miranda, E. (2004), "Performance-based earthquake engineering", Earthquake Engineering from Engineering Seismology to Performance-based Engineering, CRC Press, USA.
  41. Mattsson, L.G. and Jenelius, E. (2015), "Vulnerability and resilience of transport systems-a discussion of recent research", Tran. Res. A-Pol., 81, 16-34. https://doi.org/10.1016/j.tra.2015.06.002.
  42. McAllister, T. (2013), "Developing guidelines and standards for disaster resilience of the built environment: A research needs assessment", NIST Technical Note 1795, National Institute of Standards and Technology Patrick D. Gallagher, Under Secretary of Commerce for Standards and Technology and Director. http://dx.doi.org/10.6028/NIST.TN.1795.
  43. McDaniels, T., Chang, S., Cole, D., Mikawoz, J. and Longstaff, H. (2008), "Fostering resilience to extreme events within infrastructure systems: Characterizing decision contexts for mitigation and adaptation", Global Environ. Chang., 18, 310-318. https://doi.org/10.1016/j.gloenvcha.2008.03.001.
  44. Mitoulis, S.A. and Rodriguez, J.R. (2016), "Seismic performance of novel resilient hinges for columns and application on irregular bridges", J. Bridge Eng., 22(2), 04016114-1-04016114-12. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000980.
  45. Newscientist (2019), https://www.newscientist.com/article/2176962-genoa-bridge-collapse-what-went-wrong-and-are-other-bridges-at-risk/#ixzz69Zq8e6TI.
  46. Nikolic, Z., Zivaljic, N. and Smalanovic, H. (2017), "Influence of ductility classes on seismic response of reinforced concrete structures", Coupl. Syst. Mech., 7(2), 177-195. https://doi.org/10.12989/csm.2018.7.2.177.
  47. Panagiotakos, T.B. and Fardis, M.N. (1999) "Deformation-controlled earthquake-resistant design of RC buildings", J. Earthq. Eng., 3(4), 498-518. https://doi.org/10.1080/13632469909350357.
  48. Papanikolaou, V.K., Elnashai, A.S. and Pareja, J.F. (2005), "Limits of applicability of conventional and adaptive pushover analysis for seismic response assessment report", Mid-America Earthquake Centre, University of Illinois, Urbana-Champaign.
  49. Park, J., Goodno, B., Bostrom, A. and Craig, J. (2004), "Probabilistic decision analysis for seismic rehabilitation of a regional building system", Proceeding of 13th World Conference on Earthquake Engineering, Paper #2254, Vancouver, BC, August.
  50. Pettinga, J.D. and Priestley, M.J.N. (2005), Dynamic Behavior of Reinforced Concrete Frames Designed with DDBD, Rose School Research Report, IUSS Press.
  51. Priestley, M.J.N. and Kowalsky, M.J. (2000), "Direct displacement-based design of concrete buildings", Bull. NZ Nat. Soc. Earthq. Eng., 33(4), 421-444.
  52. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design of Structures, IUSS Press, Pavia.
  53. Rania, N., Coppola, I., Martorana, F. and Migliorini, I. (2019), "The collapse of the Morandi Bridge in Genoa on 14 August 2018: A collective traumatic event and its emotional impact linked to the place and loss of a symbol", Sustainab., 11(23), 6822. https://doi:10.3390/su11236822.
  54. Reed, D., Kapur, K.C. and Christie, R.D. (2009), "Methodology for assessing the resilience of networked infrastructure", IEEE Syst. J., 3(2), 174-180. https://doi:10.1109/JSYST.2009.2017396.
  55. Reggiani, A, Nijkamp, P. and Lanzi, D. (2015), "Transport resilience and vulnerability: The role of connectivity", Tran. Res. A-Pol., 81, 4-15. https://doi.org/10.1016/j.tra.2014.12.012.
  56. Reinhorn, A.M. and Cimellaro, G.P. (2014), "Consideration of resilience of communities in structural design", Ed. Fischinger, M., Performance-Based Seismic Engineering: Vision for an Earthquake Resilient Society. Geotechnical, Geological and Earthquake Engineering, 32, Springer, Dordrecht.
  57. Renschler, C., Frazier, A., Arendt, L., Cimellaro, G.P., Reinhorn, A.M. and Bruneau, M. (2010), "Framework for defining and measuring resilience at the community scale: the PEOPLES resilience framework", MCEER Technical Report-MCEER-10-006, University at Buffalo (SUNY), State University of New York, Buffalo, NY, USA.
  58. Rofooei, F.R., Attari, N.K., Rasekh, A. and Shodja, A.H. (2007), "Adaptive pushover analysis", Asian J. Civil Eng., 8(3), 343-358.
  59. Royce, F. and Bekera, B. (2014) "A metric and frameworks for resilience analysis of engineered and infrastructure systems", Reliab. Eng. Syst. Saf., 121, 90-103. http://dx.doi.org/10.1016/j.ress.2013.07.004.
  60. Salihovic, A. and Ademovic, N. (2017), "Nonlinear analysis of reinforced concrete frame under lateral load", Coupl. Syst. Mech., 6(4), 523-537. https://doi.org/10.12989/csm.2017.6.4.523.
  61. Sarfaraz, S.M., Rosic, V.B., Matthies, H.G. and Ibrahimbegovic, A. (2018), "Stochastic upscaling via linear Bayesian updating", Coupl. Syst. Mech., 7(2), 211-232. https://doi.org/10.12989/csm.2018.7.2.211.
  62. Satterthwaite, D. and Dodman, D. (2014), "Towards resilience and transformation", Environ. Urb. Brief 28.
  63. SEAOC (1999), Recommended Lateral Force Requirements and Commentary, 7th Edition.
  64. SEAOC Vision 2000 Committee (1995), Performance-Based Seismic Engineering, Report, Structural Engineers Association of California, Sacramento, CA.
  65. Sullivan, T.J., Calvi, G.M., Priestley, M.J.N. and Kowalsky, M.J. (2003), "The limitations and performances of different displacement based design methods", J. Earthq. Eng., 7(1), 201-241. https://doi:10.1080/13632460309350478.
  66. Titirla, M., Zarkadoulas, N., Mitoulis, S.A. and Mylonakis, G. (2017), "Rocking isolation of bridge piers on elastomeric pads", 16th World Conference on Earthquake Engineering (16WCEE), Santiago, Chile, Paper No. 4040, January.
  67. Tubaldi, E., Mitoulis, S.A., Ahmadi, H. and Muhr, A. (2016), "A parametric study on the axial behaviour of elastomeric isolators in multi-span bridges subjected to horizontal seismic excitations", B. Earthq. Eng., 14(4), 1285-1310. https://doi.org/10.1007/s10518-016-9876-9.
  68. Vamvatsikos, D. and Cornell, C.A. (2004), "Applied incremental dynamic analysis", Earthq. Spectra, 20(2), 523-553. https://doi.org/10.1193/1.1737737.
  69. Viti, S., Cimellaro, G.P. and Reinhorn, A.M. (2006), "Retrofit of a hospital through strength reduction and enhanced damping", Smart Struct. Syst., 2(4), 339-355. https://doi.org/10.12989/sss.2006.2.4.339.
  70. Vugrin, E.D., Warren, D.E. and Ehlen, M.A. (2011), "A resilience assessment framework for infrastructure and economic systems: Quantitative and qualitative resilience analysis of petrochemical supply chains to a hurricane", Proc. Saf. Prog., 30(3), 280-290. https://doi.org/10.1002/prs.10437.
  71. Wilson, E.L., Der Kiureghian, A. and Bayo, E. (1981), "A replacement for the SRSS method in seismic analysis", Earthq. Eng. Struct. D., 9(2), 187-192. https://doi.org/10.1002/eqe.4290090207.