Computers and Concrete

  • 제25권4호
  • /
  • Pages.293-302
  • /
  • 2020
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Cyclic performance of RC beam-column joints enhanced with superelastic SMA rebars

  • 투고 : 2019.10.17
  • 심사 : 2020.02.20
  • 발행 : 2020.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Connections play a significant role in strength of structures against earthquake-induced loads. According to the post-seismic reports, connection failure is a cause of overall failure in reinforced concrete (RC) structures. Connection failure results in a sudden increase in inter-story drift, followed by early and progressive failure across the entire structure. This article investigated the cyclic performance and behavioral improvement of shape-memory alloy-based connections (SMA-based connections). The novelty of the present work is focused on the effect of shape memory alloy bars is damage reduction, strain recoverability, and cracking distribution of the stated material in RC moment frames under seismic loads using 3D nonlinear static analyses. The present numerical study was verified using two experimental connections. Then, the performance of connections was studied using 14 models with different reinforcement details on a scale of 3:4. The response parameters under study included moment-rotation, secant stiffness, energy dissipation, strain of bar, and moment-curvature of the connection. The connections were simulated using LS-DYNA environment. The models with longitudinal SMA-based bars, as the main bars, could eliminate residual plastic rotations and thus reduce the demand for post-earthquake structural repairs. The flag-shaped stress-strain curve of SMA-based materials resulted in a very slight residual drift in such connections.

키워드

참고문헌

  1. Abdulridha, A., Palermo, D., Foo, S. and Vecchio, F.J. (2013), "Behavior and modeling of superelastic shape memory alloy reinforced concrete beams", Eng. Struct., 49, 893-904. https://doi.org/10.1016/j.engstruct.2012.12.041.
  2. Alam, M.S., Moni, M. and Tesfamariam, S. (2012), "Seismic over-strength and ductility of concrete buildings reinforced with superelastic shape memory alloy rebar", Eng. Struct., 34, 8-20. https://doi.org/10.1016/j.engstruct.2011.08.030.
  3. Alam, M.S., Youssef, M.A. and Nehdi, M. (2008), "Analytical prediction of the seismic behavior of superelastic shape memory alloy reinforced concrete elements", Eng. Struct., 30(12), 3399-3411. https://doi.org/10.1016/j.engstruct.2008.05.025.
  4. Alam, M.S., Youssef, M.A. and Nehdi, M.L. (2010), "Exploratory investigation on mechanical anchors for connecting SMA bars to steel or FRP bars", Mater. Struct., 43(1), 91-107. https://doi.org/10.1617/s11527-010-9601-0.
  5. Billah, A.M. and Alam, M.S. (2012), "Seismic performance of concrete columns reinforced with hybrid shape memory alloy (SMA) and fiber reinforced polymer (FRP) bars", Constr. Build. Mater., 28(1), 730-742. https://doi.org/10.1016/j.conbuildmat.2011.10.020.
  6. Chalioris, C.E., Favvata, M.J. and Karayannis, C.G. (2008), "Reinforced concrete beam-column joints with crossed inclined bars under cyclic deformations", Earthq. Eng. Struct. Dyn., 37(6), 881-897. https://doi.org/10.1002/eqe.793.
  7. DesRoches, R., McCormick, J. and Delemont, M. (2004), "Cyclic properties of superelastic shape memory alloy wires and bars", J. Struct. Eng., 130(1), 38-46. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(38).
  8. Du Beton, F.I. (2010), "Model code 2010-First complete draft", FIB Bull., 55, 318.
  9. El-Amoury, T. and Ghobarah, A. (2002), "Seismic rehabilitation of beam-column joint using GFRP sheets", Eng. Struct., 24(11), 1397-1407. https://doi.org/10.1016/S0141-0296(02)00081-0.
  10. Georgiades, A.V., Saha, G.C., Kalamkarov, A.L., Rokkam, S.K., Newhook, J.P. and Challagulla, K.S. (2005), "Embedded smart GFRP reinforcements for monitoring reinforced concrete flexural components", Smart Struct. Syst., 1(4), 369-384. https://doi.org/10.12989/sss.2005.1.4.369.
  11. Ha, G.J., Kim, J.K. and Chung, L. (1992), "Response of reinforced high-strength concrete beam-column joints under load reversals", Mag. Concrete Res., 44(160), 175-184. https://doi.org/10.1680/macr.1992.44.160.175.
  12. Hawileh, R.A., Rahman, A. and Tabatabai, H. (2010), "Nonlinear finite element analysis and modeling of a precast hybrid beam-column connection subjected to cyclic loads", Appl. Math. Model., 34(9), 2562-2583. https://doi.org/10.1016/j.apm.2009.11.020.
  13. Kabir, M.R., Alam, M.S., Said, A.M. and Ayad, A. (2016), "Performance of hybrid reinforced concrete beam column joint: A critical review", Fiber., 4(2), 13. https://doi.org/10.3390/fib4020013.
  14. Kyei, C. (2014), "Effects of blast loading on seismically detailed reinforced concrete columns", Doctoral Dissertation, Carleton University.
  15. Li, B. and Kulkarni, S.A. (2009), "Seismic behavior of reinforced concrete exterior wide beam-column joints", J. Struct. Eng., 136(1), 26-36. https://doi.org/10.1061/(ASCE)0733-9445(2010)136:1(26).
  16. Masi, A. and Santarsiero, G. (2013), "Seismic tests on RC building exterior joints with wide beams", Adv. Mater. Res., 787, 771-777. https://doi.org/10.4028/www.scientific.net/AMR.787.771.
  17. Masi, A., Santarsiero, G. and Lignola, G.P.M. (2013), "Study of the seismic behavior of external RC beam-column joints through experimental tests and numerical simulations", Eng. Struct., 52, 207-219. https://doi.org/10.1016/j.engstruct.
  18. Nehdi, M., Alam, M.S. and Youssef, M.A. (2011), "Seismic behaviour of repaired superelastic shape memory alloy reinforced concrete beam-column joint", Smart Struct. Syst., 7(5), 329-348. https://doi.org/10.12989/sss.2011.7.5.329.
  19. Ottosen, N.S. (1977), "A failure criterion for concrete", J. Eng. Mech. Div., 103(4), 527-535. https://doi.org/10.1061/JMCEA3.0002248
  20. Qissab, M. and Salman, M.M. (2018), "Shear strength of non-prismatic steel fiber reinforced concrete beams without stirrups", Struct. Eng. Mech., 67, 347-358. https://doi.org/10.12989/sem.2018.67.4.347.
  21. Rezaee Azariani, H., Esfahani, M.R. and Shariatmadar, H. (2018), "Behavior of exterior concrete beam-column joints reinforced with Shape Memory Alloy (SMA) bars", Steel Compos. Struct., 28(1), 83-98. https://doi.org/10.12989/scs.2018.28.1.083
  22. Santarsiero, G. (2018), "FE modelling of the seismic behavior of wide beam-column joints strengthened with CFRP systems", Build., 8(2), 31. https://doi.org/10.3390/buildings8020031.
  23. Shahverdi, M., Czaderski, C., Annen, P. and Motavalli, M. (2016), "Strengthening of RC beams by iron-based shape memory alloy bars embedded in a shotcrete layer", Eng. Struct., 117, 263-273. https://doi.org/10.1016/j.engstruct.2016.03.023.
  24. Wang, X., Zhou, C., Ai, J., Petru, M. and Liu, Y. (2020), "Numerical investigation for the fatigue performance of reinforced concrete beams strengthened with external prestressed HFRP sheet", Constr. Build. Mater., 237, 117601. https://doi.org/10.1016/j.conbuildmat.2019.117601.
  25. Youssef, M.A., Alam, M.S. and Nehdi, M. (2008), "Experimental investigation on the seismic behavior of beam-column joints reinforced with superelastic shape memory alloys", J. Earthq. Eng., 12(7), 1205-1222. https://doi.org/10.1080/13632460802003082.

피인용 문헌

  1. Improving the seismic performance of reinforced concrete frames using an innovative metallic-shear damper vol.28, pp.3, 2021, https://doi.org/10.12989/cac.2021.28.3.275