Advances in concrete construction

  • 제9권4호
  • /
  • Pages.375-386
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Fracture behavior of monotype and hybrid fiber reinforced self-compacting concrete at different temperatures

  • Mazloom, Moosa (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Karimpanah, Hemin (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Karamloo, Mohammad (Department of Civil Engineering, Shahid Rajaee Teacher Training University)
  • 투고 : 2019.12.08
  • 심사 : 2020.03.09
  • 발행 : 2020.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

In the present study, the effect of basalt, glass, and hybrid glass-basalt fibers on mechanical properties and fracture behavior of self-compacting concrete (SCC) mixes have been assessed at room and elevated temperatures. To do so, twelve mix compositions have been prepared such that the proper workability, flowability, and passing ability have been achieved. Besides, to make comparison possible, water to binder ratio and the amount of solid contents were kept constant. Four fiber dosages of 0.5, 1, 1.5, and 2% (by concrete volume) were considered for monotype fiber reinforced mixes, while the total amount of fiber were kept 1% for hybrid fiber reinforced mixes. Three different portions of glass and basalt fiber were considered for hybridization of fibers to show the best cocktail for hybrid basalt-glass fiber. Test results indicated that the fracture energy of mix is highly dependent on both fiber dosage and temperature. Moreover, the hybrid fiber reinforced mixes showed the highest fracture energies in comparison with monotype fiber reinforced specimens with 1% fiber volume fraction. In general, hybridization has played a leading role in the improvement of mechanical properties and fracture behavior of mixes, while compared to monotype fiber reinforced specimens, hybridization has led to lower amounts of compressive strength.

키워드

과제정보

The authors confirm no conflict of interest. Besides, the authors declare that this study received no funding or financial support from any funding body or organization.

참고문헌

  1. Afroughsabet, V., Geng, G., Lin, A., Biolzi, L., Ostertag, C.P. and Monteiro, P.J.M. (2019), "The influence of expansive cement on the mechanical, physical, and microstructural properties of hybrid-fiber-reinforced concrete", Cement Concrete Compos., 96, 21-32. https://doi.org/10.1016/j.cemconcomp.2018.11.012.
  2. ASTM C1609/C1609M-12 (2012), Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), ASTM International, West Conshohocken, PA.
  3. ASTM C 78 (2002), Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
  4. ASTM C 496 (2002), Standard Test Method for Splitting Tensile Strength of Cylinderical Concrete Specimens, American Society of Testing Materials.
  5. Barnat-Hunek, D., Gora, J., Andrzejuk, W. and Lagod, G. (2018), "The microstructure-mechanical properties of hybrid fibres-reinforced self-compacting lightweight concrete with perlite aggregate", Mater. (Basel), 11(7), 1093. https://doi.org/10.3390/ma11071093.
  6. Bhosale, A., Rasheed, M.A., Prakash, S.S. and Raju, G. (2019), "A study on the efficiency of steel vs. synthetic vs. hybrid fibers on fracture behavior of concrete in flexure using acoustic emission", Constr. Build. Mater., 199, 256-268. https://doi.org/10.1016/j.conbuildmat.2018.12.011.
  7. BS EN 12390, p. (2000), Testing Hardened Concrete, Method of Determination of Compressive Strength of Concrete Cubes, British Standards Institution.
  8. Chu, H.Y., Jiang, J.Y., Sun, W. and Zhang, M. (2016), "Mechanical and physicochemical properties of ferro-siliceous concrete subjected to elevated temperatures", Constr. Build. Mater., 122, 743-752. https://doi.org/10.1016/j.conbuildmat.2016.06.104.
  9. Dias, D.P. and Thaumaturgo, C. (2005), "Fracture toughness of geopolymeric concretes reinforced with basalt fibers", Cement Concrete Compos., 27(1), 49-54. https://doi.org/10.1016/j.cemconcomp.2004.02.044.
  10. Ding, Y., Zhang, Y. and Thomas, A. (2009), "The investigation on strength and flexural toughness of fibre cocktail reinforced self-compacting high performance concrete", Constr. Build. Mater., 23(1), 448-452. https://doi.org/10.1016/j.conbuildmat.2007.11.006.
  11. Dugenci, O., Haktanir, T. and Altun, F. (2015), "Experimental research for the effect of high temperature on the mechanical properties of steel fiber-reinforced concrete", Constr. Build. Mater., 75, 82-88. https://doi.org/10.1016/j.conbuildmat.2014.11.005.
  12. EFNARC (2002), Specification & Guidlines for Self-compacting Concrete, English Edition, European Federation for Specialist Construction Chemicals and Concrete Systems, Norfolk, UK.
  13. Felekoglu, B., Turkel, S. and Altuntas, Y. (2007), "Effects of steel fiber reinforcement on surface wear resistance of self-compacting repair mortars", Cememt Concrete Compos., 29(5), 391-396. https://doi.org/10.1016/j.cemconcomp.2006.12.010.
  14. Grdic, Z.J., Curcic, G.A.T., Ristic, N.S. and Despotovic, I.M. (2012), "Abrasion resistance of concrete micro-reinforced with polypropylene fibers", Constr. Build. Mater., 27(1), 305-312. https://doi.org/10.1016/j.conbuildmat.2011.07.044.
  15. Hari, R. and Mini, K.M. (2019), "Mechanical and durability properties of sisal-Nylon 6 hybrid fibre reinforced high strength SCC", Constr. Build. Mater., 204, 479-491. https://doi.org/10.1016/j.conbuildmat.2019.01.217.
  16. High, C., Seliem, H.M., El-Safty, A. and Rizkalla, S.H. (2015), "Use of basalt fibers for concrete structures", Constr. Build. Mater., 96, 37-46. https://doi.org/10.1016/j.conbuildmat.2015.07.138.
  17. Hillerborg, A. (1985), "The theoretical basis of a method to determine the fracture energy G F of concrete", Mater. Struct., 18(4), 291-296. https://doi.org/10.1007/bf02472919.
  18. Iyer, P., Kenno, S.Y. and Das, S. (2015), "Mechanical properties of fiber-reinforced concrete made with basalt filament fibers", J. Mater. Civil Eng., 27(11), 04015015. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001272
  19. Kabay, N. (2014), "Abrasion resistance and fracture energy of concretes with basalt fiber", Constr. Build. Mater., 50, 95-101. https://doi.org/10.1016/j.conbuildmat.2013.09.040.
  20. Karamloo, M. and Mazloom, M. (2018), "An efficient algorithm for scaling problem of notched beam specimens with various notch to depth ratios", Comput. Concrete, 22(1), 39-51. https://doi.org/10.12989/cac.2018.22.1.039.
  21. Karamloo, M., Mazloom, M. and Ghasemi, A. (2019a), "An overview of different retrofitting methods for arresting cracks in steel structures", Struct. Monit. Mainten., 6(4), 291-315. https://doi.org/10.12989/smm.2019.6.4.291.
  22. Karamloo, M., Mazloom, M. and Payganeh, G. (2016a), "Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete", Constr. Build. Mater., 123, 508-515. https://doi.org/10.1016/j.conbuildmat.2016.07.061.
  23. Karamloo, M., Mazloom, M. and Payganeh, G. (2016b), "Influences of water to cement ratio on brittleness and fracture parameters of self-compacting lightweight concrete", Eng. Fract. Mech., 168, 227-241. https://doi.org/10.1016/j.engfracmech.2016.09.011.
  24. Karamloo, M., Mazloom, M. and Payganeh, G. (2017), "Effect of size on nominal strength of self-compacting lightweight concrete and self-compacting normal weight concrete: A stress-based approach", Mater. Today Commun., 13, 36-45. https://doi.org/10.1016/j.mtcomm.2017.08.002.
  25. Karamloo, M., Roudak, M.A. and Hosseinpour, H. (2019b), "Size effect study on compressive strength of SCLC", Comput. Concrete, 23(6), 409-419. https://doi.org/10.12989/cac.2019.23.6.409.
  26. Li, X., Bao, Y., Wu, L., Yan, Q., Ma, H., Chen, G. and Zhang, H. (2017), "Thermal and mechanical properties of high-performance fiber-reinforced cementitious composites after exposure to high temperatures", Constr. Build. Mater., 157, 829-838. https://doi.org/10.1016/j.conbuildmat.2017.09.125.
  27. Li, Y., Zhang, Y., Yang, E.H. and Tan, K.H. (2019), "Effects of geometry and fraction of polypropylene fibers on permeability of ultra-high performance concrete after heat exposure", Cement Concrete Res., 116, 168-178. https://doi.org/10.1016/j.cemconres.2018.11.009.
  28. Loh, Z.P., Mo, K.H., Tan, C.G. and Yeo, S.H. (2019), "Mechanical characteristics and flexural behaviour of fibre-reinforced cementitious composite containing PVA and basalt fibres", Sadha, 44(4), 98. https://doi.org/10.1007/s12046-019-1072-6.
  29. Mahapatra, C.K. and Barai, S.V. (2019), "Temperature impact on residual properties of self-compacting based hybrid fiber reinforced concrete with fly ash and colloidal nano silica", Constr. Build. Mater., 198, 120-132. https://doi.org/10.1016/j.conbuildmat.2018.11.155.
  30. Mazloom, M., Allahabadi, A. and Karamloo, M. (2017), "Effect of silica fume and polyepoxide-based polymer on electrical resistivity, mechanical properties, and ultrasonic response of SCLC", Adv. Concrete Constr., 5(6), 587-611. https://doi.org/10.12989/acc.2017.5.6.587.
  31. Mazloom, M. and Karamloo, M. (2019), Critical Crack-Tip Opening Displacement of SCLC, Singapore.
  32. Mazloom, M. and Mirzamohammadi, S. (2019a), "Fracture of fiber-reinforced cementitious composite at elevated temperatures", Mag. Concrete Res., 1-36. https://doi.org/10.1680/jmacr.19.00401.
  33. Mazloom, M. and Mirzamohammadi, S. (2019b), "Thermal effects on the mechanical properties of cement mortars reinforced with aramid, glass, basalt and polypropylene fibers", Adv. Mater. Res., 8(2), 137-154. https://doi.org/10.12989/amr.2019.8.2.137.
  34. Mazloom, M., Soltani, A., Karamloo, M., Hassanloo, A. and Ranjbar, A. (2018), "Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete", Adv. Mater. Res., 7(1), 45-72. https://doi.org/10.12989/amr.2018.7.1.045.
  35. Missemer, L., Ouedraogo, E., Malecot, Y., Clergue, C. and Rogat, D. (2019), "Fire spalling of ultra-high performance concrete: From a global analysis to microstructure investigations", Cement Concrete Res., 115, 207-219. https://doi.org/10.1016/j.cemconres.2018.10.005.
  36. Nataraja, M.C., Dhang, N. and Gupta, A.P. (2000), "Toughness characterization of steel fiber-reinforced concrete by JSCE approach", Cement Concrete Res., 30(4), 593-597. https://doi.org/10.1016/S0008-8846(00)00212-X.
  37. Niu, D., Huang, D. and Fu, Q. (2019), "Experimental investigation on compressive strength and chloride permeability of fiber-reinforced concrete with basalt-polypropylene fibers", Adv. Struct. Eng., 136943321983738. https://doi.org/10.1177/1369433219837387.
  38. Roudak, M.A. and Karamloo, M. (2019), "Establishment of non-negative constraint method as a robust and efficient first-order reliability method", Appl. Math. Model., 68, 281-305. https://doi.org/10.1016/j.apm.2018.11.021.
  39. Roudak, M.A., Shayanfar, M.A., Barkhordari, M.A. and Karamloo, M. (2017a), "A new three-phase algorithm for computation of reliability index and its application in structural mechanics", Mech. Res. Commun., 85, 53-60. https://doi.org/10.1016/j.mechrescom.2017.08.008.
  40. Roudak, M.A., Shayanfar, M.A., Barkhordari, M.A. and Karamloo, M. (2017b), "A robust approximation method for nonlinear cases of structural reliability analysis", Int. J. Mech. Sci., 133, 11-20. https://doi.org/10.1016/j.ijmecsci.2017.08.038.
  41. Roudak, M.A., Shayanfar, M.A. and Karamloo, M. (2018), "Improvement in first-order reliability method using an adaptive chaos control factor", Struct., 16, 150-156. https://doi.org/10.1016/j.istruc.2018.09.010.
  42. Sadrinejad, I., Madandoust, R. and Ranjbar, M.M. (2018), "The mechanical and durability properties of concrete containing hybrid synthetic fibers", Constr. Build. Mater., 178, 72-82. https://doi.org/10.1016/j.conbuildmat.2018.05.145.
  43. Siddique, R., Kapoor, K., Kadri, E.-H. and Bennacer, R. (2012), "Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete", Constr. Build. Mater., 29, 270-278. https://doi.org/10.1016/j.conbuildmat.2011.09.011.
  44. Smarzewski, P. (2019a), "Influence of basalt-polypropylene fibres on fracture properties of high performance concrete", Compos. Struct., 209, 23-33. https://doi.org/10.1016/j.compstruct.2018.10.070.
  45. Smarzewski, P. (2019b), "Study of toughness and macro/micro-crack development of fibre-reinforced ultra-high performance concrete after exposure to elevated temperature", Mater. (Basel), 12(8), 1210. https://doi.org/10.3390/ma12081210.
  46. Sun, X., Gao, Z., Cao, P. and Zhou, C. (2019), "Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete", Constr. Build. Mater., 202, 58-72. https://doi.org/10.1016/j.conbuildmat.2019.01.018.
  47. Wang, D., Ju, Y., Shen, H. and Xu, L. (2019), "Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber", Constr. Build. Mater., 197, 464-473. https://doi.org/10.1016/j.conbuildmat.2018.11.181.
  48. Zarghami, E., Azemati, H., Fatourehchi, D. and Karamloo, M. (2018), "Customizing well-known sustainability assessment tools for Iranian residential buildings using Fuzzy Analytic Hierarchy Process", Build. Environ., 128, 107-128. https://doi.org/10.1016/j.buildenv.2017.11.032.
  49. Zarghami, E. and Fatourehchi, D. (2020), "Comparative analysis of rating systems in developing and developed countries: A systematic review and a future agenda towards a region-based sustainability assessment", J. Clean. Prod., 254, 120024. https://doi.org/10.1016/j.jclepro.2020.120024.
  50. Zarghami, E., Fatourehchi, D. and Karamloo, M. (2017), "Impact of daylighting design strategies on social sustainability through the built environment", Sustain. Dev., 25(6), 504-527. https://doi.org/10.1002/sd.1675.
  51. Zarghami, E., Fatourehchi, D. and Karamloo, M. (2019), "Establishing a region-based rating system for multi-family residential buildings in Iran: A holistic approach to sustainability", Sustain. Citi. Soc., 50, 101631. https://doi.org/10.1016/j.scs.2019.101631.