Advances in concrete construction

  • 제9권4호
  • /
  • Pages.345-354
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Strength enhancement of concrete incorporating alccofine and SNF based admixture

  • 투고 : 2019.10.26
  • 심사 : 2020.02.27
  • 발행 : 2020.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Cement is the most significant component in concrete. Large scale manufacturing of cement consumes more energy and release harmful products (Carbon dioxide) into the atmosphere that adversely affect the environment and depletes the natural resources. A lot of research is going on in globally concentrating on the recycling and reuse of waste materials from many industries. A major share of research is focused on finding cementitious materials alternatives to ordinary Portland cement. Many industrial waste by-products such as quartz powder, metakaolin, ground granulated blast furnace slag, silica fume, and fly ash etc. are under investigations for replacement of cement in concrete to minimize greenhouse gases and improve the sustainable construction. In current research, the effects of a new generation, ultra-fine material i.e., alccofine which is obtained from ground granulated blast furnace slag are studied as partial replacement by 25% and with varying amounts of sulfonated naphthalene formaldehyde (i.e., 0.3%, 0.35% and 0.40%) on mechanical, water absorption, thermal and microstructural properties of concrete. The results showed moderate improvement in all concrete properties. Addition of SNF with combination of alccofine showed a significant enhancement in fresh, hardened properties and water absorption test as well as thermal and microstructural properties of concrete.

키워드

과제정보

The authors acknowledge the National Institute of Technology, Srinagar providing laboratory testing facility. The authors are further thankful for the Ambuja Cement Ltd, Goa and BASF chemicals, Mumbai for providing required material.

참고문헌

  1. Aitcin, P.C. and Flatt, R.J. (2015), Science and Technology of Concrete Admixtures, Woodhead Publishing, Sawston, United Kingdom.
  2. Aitcin, P.C., Jiang. S., Byung-Gi, K. and Nikinamubanzi, P.C. (2001), "Cement/superplasticizer interaction: The case of polysulfonates", Bulletin des laboratories des Ponts et Chaussees, 233, 89-99.
  3. Almeida, A.E.F.S. and Sichieri, E.P. (2006), "Thermogravimetric analyses and mineralogical study of polymer modified mortar with silica fume", Mater. Res., 9(3), 321-326. https://doi.org/10.1590/S1516-14392006000300012.
  4. Amba, J.C., Balayssac, J.P. and Detriche, C.H. (2010), "Characterization of different shrinkage of bonded mortar overlays subjected to drying", Mater. Struct., 43, 297-308. https://doi.org/10.1617/s11527-009-9489-8.
  5. ASTM C1202 (2019), Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken, PA, ASTM International.
  6. ASTM C494 (2017), Standard Specification for Chemical Admixture for Concrete, West Conshohocken, USA.
  7. ASTM C642 (2013), Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, West Conshohocken, USA.
  8. ASTM C989 (1999), Standard Specification for Ground Granulated Blast-furnace Slag for Use in Concrete and Mortars, West Conshohocken, USA.
  9. Aziz, M.A.E., Aleem, S.A.E., Heikal, M. and El-Didamony, H. (2014), "Hydration and durability of sulphate resisting and slag cement blends in caron's lake water", Constr. Build. Mater., 50, 281- 290. https://doi.org/10.1016/j.conbuildmat.2013.09.034
  10. BIS 10262 (2009), Guidelines for Concrete Mix Design Proportioning, Bureau of Indian Standards, New Delhi, India.
  11. BIS 1199 (1959), Methods of Sampling and Analysis of Concrete, New Delhi, India.
  12. BIS 383 (1970), Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, New Delhi, India.
  13. BIS 516 (1959), Methods of Tests for Strength of Concrete, New Delhi, India.
  14. BIS 5816 (1999), Split Tensile Strength of Concrete - Method of Test, New Delhi, India.
  15. BIS 8112 (2013), Ordinary Portland Cement 43 Grade Specification, New Delhi, India.
  16. Chithra, S., Senthil Kumar, S.R.R. and Chinnaraju, K. (2016), "The effect of colloidal nano-silica on workability, mechanical and durability properties of High-Performance concrete with copper slag as partial fine aggregate", Constr. Build. Mater., 113, 794-804. https://doi.org/10.1016/j.conbuildmat.2016.03.119.
  17. Ghugal, Y.M., Sabale, V.D. and More, S.S. (2017), "Experimental investigation on high strength steel fiber reinforced concrete with metakaolin", Asian J. Civil Eng. (BHRC), 18(7), 1113-1124.
  18. Gopalakrishnan, K., Birgisson, B., Taylor, P. and Nii, O.A.O. (2011), Nanotechnology in Civil Infrastructure, Springer, Berlin, Heidelberg, Germany.
  19. Granizo, M.L., Alonso, S., Blanco-Varela, M.T. and Palomo, A. (2002), "Alkaline activation of metakaolin: effect of calcium hydroxide in the products of reaction", J. Am. Ceram. Soc., 85, 225-231. https://doi.org/10.1111/j.1151-2916.2002.tb00070.x.
  20. Jamkar, S., Ghugal, Y. and Patankar, S. (2013), "Effect of fly-ash finenes on workability and compressive strength of geo polymer concrete", Ind. Concrete J., 87(4), 57-62.
  21. Jangra, P., Singhal, D., Jindal, B.B., Junaid, M.T. and Mehta, A. (2018), "Mechanical and microstructural properties of fly ash based geopolymer concrete incorporating alccofine at ambient curing", Constr. Build. Mater., 180, 298-307. doi.org/10.1016/j.conbuildmat.2018.05.286
  22. Jindal, B.B. (2019), "Investigations on the properties of geopolymer mortar and concrete with mineral admixtures: a review", Constr. Build. Mater., 227, 116644. doi.org/10.1016/j.conbuildmat.2019.08.025
  23. Jindal, B.B., Singhal, D., Sharma, S.K. and Parveen (2017c), "Suitability of ambient-cured alccofine added low calcium fly ash-based geopolymer concrete", Ind. J. Sci. Tech., 10(12), 1-10. https://doi.org/10.17485/ijst/2017/v10i12/110428.
  24. Jindal, B.B., Singhal, D., Sharma, S.K., Ashish, D.K. and Parveen (2017a), "Improving compressive strength of low calcium fly ash geopolymer concrete with alccofine", Adv. Concrete Constr., 5(1), 17-29. https://doi.org/10.12989/acc.2017.19.2.017.
  25. Jindal, B.B., Singhal, D., Sharma, S.K., Yadav, A., Shubham, S. and Anand, A., (2017b), "Strength and permeation properties of alccofine activated low calcium fly ash geopolymer concrete", Comput. Concrete, 20(6), 683-688. https://doi.org/10.12989/cac.2017.20.6.683.
  26. Li, H., Zhang, M.H. and Ou, J.P. (2007), "Flexural fatigue performance of concrete containing nano- particles for pavement", Int. J. Fatig., 29, 1292-1301. https://doi.org/10.1016/j.ijfatigue.2006.10.004.
  27. Narender Reddy, A. (2019), "An experimental study on effect of colloidal nano-silica on tetranary blended concrete", Adv. Concrete Constr., 7(2), 107-115. https://doi.org/10.12989/acc.2019.7.2.107.
  28. Noushini, A., Aslani, F., Castel, A., Gilbert, R.I., Uy, B. and Foster, S. (2016), "Compressive stress strain model for low-calcium fly ash-based geopolymer and heat-cured Portland cement concrete", Cement Concrete Compos., 73, 136-146. https://doi.org/10.1016/j.cemconcomp.2016.07.004.
  29. Reddy, P.N. and Naqash, J.A (2019), "Experimental study on TGA, XRD and SEM analysis of concrete with ultra-fine slag", Int. J. Eng., 32(5), 679-684.
  30. Roychand, S., Silva, S.D. and Setunge, S. (2016), "Micro and nano engineered high volume ultrafine fly ash cement composite with and without additives", Int. J. Concrete Struct. Mater., 10(1), 113-124. https://doi.org/10.1007/s40069-015-0122-7.
  31. Said, A.M., Zeidan, M.S., Bassuoni, M.T. and Tian, Y. (2012), "Properties of concrete incorporating nano-silica", Constr. Build. Mater., 36, 838-844. https://doi.org/10.1016/j.conbuildmat.2012.06.044.
  32. Worrell, E., Price, L., Martin, N., Hendriks, C. and Media, L.O. (2001), "Carbon dioxide emissions from the global cement industry", Ann. Rev. Energy Environ., 26(1), 303-329. https://doi.org/10.1146/annurev.energy.26.1.303.
  33. Yip, C.K., Lukey, G.C., Provis, J.L. and Van Deventer, J.S. (2008), "Effect of calcium silicate sources on geopolymerisation", Cement Concrete Res., 38, 554-564. https://doi.org/10.1016/j.cemconres.2007.11.001.
  34. Zhang, Q. and Ye, G. (2011), "Microstructure analysis of heated portland cement paste", Procedia Eng., 14, 830-836. https://doi.org/10.1016/j.proeng.2011.07.105.