Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

Convergent Investigation with Flow Analysis by Type of Shock Absorber Orifice

쇽업소버 오리피스의 유형별 유동해석으로의 융합적 고찰

  • Oh, Bum-Suk (Division of Mechanical & Automotive Engineering, Kongju National University) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
  • 오범석 (공주대학교 기계자동차공학부) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2019.10.10
  • Accepted : 2020.01.20
  • Published : 2020.01.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the flow analyses by type of shock absorber orifice were carried out. A shock absorber is indispensable for the ride comfort that is important at the standard of a good car. As the analysis procedure, the actual speed of the shock absorber was set as the flow rate when the cylinder was advanced. And the flow analysis results on models A, B and C of shock absorber models were compared with each other. As the examination on the flow orifice in the vicinity of each model through the analysis of flow, the performance of shock absorber were recognized. On the whole, model A had the fastest flow rate and also had the largest flow rate. Model B had the slowest flow rate and the flow rate features of models B and C with the same number of orifices were similar. Through this study, it is possible to see which shock absorber orifice model facilitates the flow inside the cylinder and increases the ride comfort. It is seen that this analysis result on the flow analyses by type of shock absorber orifice can be applied by converging with the field of design.

본 연구에서는 쇽업소버 오리피스 유형별 유동해석을 하였다. 좋은 차의 기준에서 중요한 승차감을 위해서는 쇽업소버는 없어서는 안 될 존재이다. 해석 절차로서, 실제 쇽업소버의 실린더가 전진될 때의 속력을 유동 속도로 설정하여 쇽업소버의 모델 A, B, C들에 대한 유동 해석 결과들을 서로 비교하였다. 유동해석을 통해 각 모델의 오리피스 근처에서 유동흐름을 고찰하여 쇽업소버의 성능을 알아보았다. 전반적으로 모델 A가 유속이 가장 빨랐으며 유동변화 또한 가장 컸다. 모델 B가 유속이 가장 느렸으며 오리피스의 개수가 같은 모델 B, C의 유속 형상들은 비슷하였다. 본 연구를 통하여 어느 쇽업소버 오리피스 모델이 실린더 내에서의 유동을 원활히 하여 승차감을 상승시키는지를 알 수 있다. 쇽업소버 오리피스의 유형별 유동해석에 대한 본 해석 결과는 디자인 분야에 융합하여 적용될 수 있다고 보인다.

Keywords

References

  1. B. S. Oh & J. U. Cho. (2019). Convergence Study on Durability Analysis of Scooter Seat. Journal of the Korea Convergence Society, 10(6), 165-170. DOI : 10.15207/JKCS.2019.10.6.165
  2. H. C. Lee & J. U. Cho. (2014). A Study on Air Flow Analysis due to the Shape of Automotive Body. Journal of the Korea Convergence Society, 5(2), 19-23. DOI : 10.15207/jkcs.2014.5.2.019
  3. J. U. Cho. (2015). Study on Convergence Technique through the Flow Analytical Study inside the Faucet for Bathroom. Journal of the Korea Convergence Society, 6(2), 37-42. DOI : 10.15207/JKCS.2015.6.2.037
  4. H. C. Lee & J. U. Cho. (2014). A Study on Air Flow Analysis due to the Shape of Automotive Body. Journal of the Korea Convergence Society, 5(2), 19-23. DOI : 10.15207/JKCS.2014.5.2.019
  5. S. H. Jung. (2017). The Control of Spring-Mass-Damper Convergence System using $H{\infty}$ Controller and ${\mu}$?Synthesis Controller. Journal of the Korea Convergence Society, 8(5), 1-11. https://doi.org/10.15207/JKCS.2017.8.5.001
  6. O. B. Suk & J. U. Cho. (2018). A Convergence Study through Flow Analysis due to the Configuration of Automotive Air Breather. Journal of the Korea Convergence Society, 9(10), 265-270. https://doi.org/10.15207/JKCS.2018.9.10.265
  7. D. H. Park & H. H. Kwon. (2016). Development of Automotive Seat Rail Parts for Improving Shape Fixability of Ultra High Strength Steel of 980MPa. Journal of the Korean Society of Manufacturing Process Engineers, 15(5), 137-144. DOI : 10.14775/ksmpe.2016.15.5.137
  8. J. S. Ha & G. M. Lee. (2017). A Study on Structure and Vibration Analysis of an Air Suspension Seat. Journal of the Korean Society of Manufacturing Process Engineers, 16(6), 47-54. DOI : 10.14775/ksmpe.2017.16.6.047
  9. S. C. Yoo. (2018). Development of the Design and Manufacturing Technologies of the Experimental Four-Valve SI Engine for In-Cylinder Air Flow Study Using the Laser Based Flow Diagnostic Techniques. Journal of the Korean Society of Mechanical Technology, 20(3), 377-382. DOI : doi.org/10.17958/ksmt.20.3.201806.377
  10. J. B. Lee, D. H. Yang, S. Y. Kim & K. S. Kim. (2015). A Study on Flow Analysis of the Blast Valve for Anti-aircraft Shelter. Journal of the Korean Society of Mechanical Technology, 17(5), 1107-1115. DOI : 10.17958/ksmt.17.5.201510.1107
  11. S. H. Kwag. (2012). Flow Analysis over Moving Circular Cylinder Near the Wall at Moderate Reynolds Number. Journal of the Korean Society of Marine Engineering, 36(8), 1091-1096. DOI : 10.5916/jkosme.2012.36.8.1091
  12. K. S. Ahn, J. G. Oh, T. H. Yang & G. T. Yeo. (2019). An analysis of the Factors of Moving in and Activation Strategies for Incheon Cold-Chain Cluster using LNG cold energy. Journal of Digital Convergence, 17(2), 101-111. https://doi.org/10.14400/JDC.2019.17.2.101
  13. S. Y. Min & S. I. Kim. (2018). Study on Improvement of tap water drinking rate of Seoul city Tap water 'Arisu' through usage and recognition analysis. Journal of Digital Convergence, 16(9), 399-404. https://doi.org/10.14400/JDC.2018.16.9.399
  14. J. S. Lim. (2019). A Design of Small Size Sensor Data Acquisition and Transmission System. Journal of Convergence for Information Technology, 9(1), 136-141. https://doi.org/10.22156/CS4SMB.2019.9.1.136
  15. J. H. Ku. (2017). A Study on the Platform for Big Data Analysis of Manufacturing Process. Journal of Convergence for Information Technology, 7(5), 177-182. https://doi.org/10.22156/CS4SMB.2017.7.5.177