References
- Ahn, J. H., Nam, D. K., Lee, W. H., Huh, J., Kim, I. T. (2016), Evaluation of Compressive Strengths of Tubular Steel Members According to Corrosion Damage and Shape, Journal of Korean Society of Steel Construction, 28(4), 213-222. https://doi.org/10.7781/kjoss.2016.28.4.213
- Andrade, C., Alonso, C. (1996), Corrosion Rate Monitoring in the Laboratory and On Site", Construction Building Materials, 10(5),.315-328. https://doi.org/10.1016/0950-0618(95)00044-5
- Hong, S., Lee, Y., Kim, S., Kim, J. (2018), Estimation of Compressive Strength of Reinforced Concrete Vertical and Horizonal Members Using Ultrasonic Pulse Velocity Method, Journal of the Korea Institute for Structural Maintenance and Inspection, 22(6), 197-205. https://doi.org/10.11112/JKSMI.2018.22.6.197
- Jeong, Y., Kim, W., Lee, I., Lee, J., Kim, J. (2016a), Definition, End-of-life Criterion and Prediction of Service Life for Bridge Maintenance, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(4), 68-76. https://doi.org/10.11112/jksmi.2016.20.4.068
- Jeong, Y., Kim, W., Lee, I., Lee, J. (2016b), Development of Bridge Inspection Reliability and Improvement Strategy, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(5), 50-57. https://doi.org/10.11112/jksmi.2016.20.5.050
- Jeong, Y., Kim, W., Lee, I., Lee, J. (2016c), Bridge Life Cycle Cost Analysis of Preventive Maintenance, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(6), 1-9. https://doi.org/10.11112/jksmi.2016.20.6.001
- Lee, H., Lee, B., Oh, K., Kim, Y. (2015), Reliability Evaluation for Prediction of Concrete Compressive Strength through Impact Resonance Method and Ultra Pulse Velocity Method, Journal of the Korea Institute for Structural Maintenance and Inspection, 19(4), 18-24. https://doi.org/10.11112/jksmi.2015.19.4.018
- Lee, M. J., Ahn, J. H., Kim, I. T. (2014), Shear Buckling Strength and Behaviors of Steel Plate Girder with Asymmetrical Shear Resistant Web Panel by Local Corrosion, Journal of Korean Society of Steel Construction, 26(2), 105-118. https://doi.org/10.7781/kjoss.2014.26.2.105
- Kim, I., Chang, H. J., Cheung, J. Y. (2010) An Experimental Study on the Evaluation of Residual Tensile Load-carrying Capacity of Corroded Steel Plates of Temporary Structure, Journal of Korean Society of Steel Construction, 22(5), 399-409.
- Kim, I., Lee, M., Shin, C. (2011), An Experimental Study on Evaluation of Axially Compressive Buckling Strength of Corroded Temporary Steel, Journal of the Korea Institute for Structural Maintenance and Inspection, 19(4), 18-24. https://doi.org/10.11112/jksmi.2015.19.4.018
- Kim, M. W., Oh, H., Oh, K. C. (2016), Estimating the Compressive Stregnth of High-Strength Concrete Using Surface Rebound Value and Ultrasonic Velocity, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(2), 1-9. https://doi.org/10.11112/jksmi.2016.20.2.001
- Korean Agency for Technology and Standards (KATS) (2018), Testing method for velocity of ultrasonic pulses to conclude compressive strength of concrete, KS F 2731.
- KOSIS (2015), Status of the National Bridges and Tunnels in Republic of Korea, Korea Statistical Information Service, Korea.
- Kwon, S. J., Park, S. S. (2012), Non Destructive Technique for Steel Corrosion Detection Using Heat Induction and IR Thermography, Journal of the Korea Institute for Structural Maintenance and Inspection, 16(2), 40-48. https://doi.org/10.11112/jksmi.2012.16.2.040
- Yun, J., Paik, I., Cho, S., Chung, L. (2006), Non-Destructive Corrosion Measurement Technique of Reinforcing Bars Using Infrared Thermography according to Atmosphere Temperature, Proceedings of 2006 Fall Conference of Korea Concrete Institute, 18(2), 233-236.