DOI QR코드

DOI QR Code

말뚝식 계류시설의 표준설계응답스펙트럼 해석법 적용성 연구

Study on the Applicability of Standard Design Response Spectrum Analysis Method for Pile-type Mooring Facilities

  • 오정근 (국립경상대학교 토목공학과) ;
  • 정영석 (국립경상대학교 토목공학과) ;
  • 권민호 (국립경상대학교 토목공학과)
  • 투고 : 2020.07.16
  • 심사 : 2020.09.22
  • 발행 : 2020.10.30

초록

이 논문의 목적은 말뚝식 계류시설에 대해 현행 실무에서 주로 적용하고 있는 응답스펙트럼 해석법에서 표준설계응답스펙럼의 적용성에 대해 연구하는 것이다. 이를 위하여 다양한 지층조건을 고려한 Proshake 1차원 부지응답을 수행하여 현행 표준설계응답스펙트럼과 비교하고, Abaqus를 활용한 지반-말뚝 모델링으로 시간이력해석을 수행하여 지반-말뚝 동적거동 특성을 분석하였으며, 잔교시설이 설치되는 경사지반에 대해 Abaqus를 활용한 2차원 부지응답해석을 수행하여 응답스펙트럼의 기준면 선정방안을 검토하였다. 연구 결과 말뚝식 계류시설의 지반-말뚝 동적거동 특성과 경사지반의 특성을 고려할 경우 현행 표준설계응답스펙트럼의 적용성에 문제가 있으며 개선이 필요하다는 것을 확인하였다.

The purpose of this paper is to study on the applicability of the standard design response spectrum from the response spectrum analysis method, mainly applied to pile mooring facilities. To this end, after performing the ProShake 1-dimensional site response considering various geological conditions, the current standard design response spectrum was compared, and the ground-pile model in time history and two-dimensional site response analysis using Abaqus were performed to analyze the dynamic behavior of the ground-pile and to examine the selection method of the reference surface of the response spectrum on the installed slope, respectively. As a result, it was confirmed that no problems were found in the applicability of the current standard design response spectrum and no improvements are needed as well when considering the characteristics of the ground-pile dynamic behavior and the slope of the pile mooring facility.

키워드

참고문헌

  1. Kim, D. S. and Lee, S. Y. (2010), Problems and Suggested Improvements in Evaluation of Earthquake Ground Motion in Korean Seismic Codes, Technology Article.
  2. Ministry of Land, Transport and Maritime Affairs (2018), Seismic design general.
  3. Sun, C. G., Han, J. T. and Cho, W. J. (2012), Representative Shear Wave Velocity of Geotechnical Layers by Synthesizing In-situ Seismic Test Data in Korea, The Journal of Engineering Geology.
  4. Lee, J. H., Kim, J. H. and Kim, J. K. (2018), Amplification Characteristics of Domestic and Overseas Intraplate Earthquake Ground Motions in Korean Soil and Standard Horizontal Design Spectrum for Soil Sites, EESK J Earthquake Eng.
  5. Pitilakis, K., Pitilakis, D., and Karatzetzou, A. (2010), Demand spectra and SFSI for the performance based design, Joint Conference Proceedings of the 7th International Conference on Urban Earthquake Engineering and the 5th International Conference on Earthquake Engineering, March 3-5, Tokyo Institute of Technology, Tokyo, Japan, CD-ROM, 23-37.
  6. Kramer, S. L. (1996), Geotechnical Earthquake Engineering, Prentice-Hall, Englewood Cliffs.
  7. Seed, H. B. and Idriss, I. M. (1970), Soil moduli and damping factors for dynamic response analysis, Report NO. EERC 75-29, Earthquake Engineering Research Center, University of California Berkeley, CA.
  8. Korea Geotechnical Society (2012), Seismic design of ground structures, Gumi Library.
  9. Kim, M. K. Rhee, J. W., Lee, P. K. and Kim, M. K. (2014), A Study of Characteristics of Soil-Pile-Structure Interaction Behavior on the Frequency Contents of Seismic Waves, Computational Structural Engineering Institute of Korea.
  10. Kim, D. K. (2013), Structural dynamics, Gumi Library.
  11. Kown, S. Y., Kim, S. J. and Yoo, M. T. (2016), Numerical Simulation of Dynamic Soil-pile Interaction for Dry Condition Observed in Centrifuge Test, JOURNAL OF THE KOREAN GEOTECHNICAL SOCIETY.
  12. Park, D. H, Park, J. B., Kim, S. Y. and Park, Y. B. (2013), 3D Finite Element Analysis of Lateral Loaded Pile using Beam and Rigid Link, LHI Journal.
  13. Kim, Y. S. (2016), Earthquake Analysis of Structure-Based Ground Systems, Gumi Library.
  14. ProShake Ground Response Analysis Program Version 2.0 User's Manual.
  15. ABAQUS, Dassault System Simulia Corp. (2011), Abaqus Analysis User's Manual. Version 6.10, 2011.