DOI QR코드

DOI QR Code

A refined HSDT for bending and dynamic analysis of FGM plates

  • Zaoui, Fatima Zohra (Laboratory of numerical and experimental modeling of the mechanical phenomena, Mechanical Engineering Department, Faculty of sciences and Technology / Ibn Badis University) ;
  • Tounsi, Abdelouahed (Material and Hydrology Laboratory, Civil Engineering Department, Faculty of Technology/Djilali Liabes University) ;
  • Ouinas, Djamel (Laboratory of numerical and experimental modeling of the mechanical phenomena, Mechanical Engineering Department, Faculty of sciences and Technology / Ibn Badis University) ;
  • Olay, Jaime A. Vina (Department of Materials Science and Metallurgical Engineering, Campus of Viesques, University of Oviedo)
  • 투고 : 2017.06.29
  • 심사 : 2019.11.27
  • 발행 : 2020.04.10

초록

In this work, a novel higher-order shear deformation theory (HSDT) for static and free vibration analysis of functionally graded (FG) plates is proposed. Unlike the conventional HSDTs, the proposed theory has a novel displacement field which includes undetermined integral terms and contains fewer unknowns. Equations of motion are obtained by using Hamilton's principle. Analytical solutions for the bending and dynamic investigation are determined for simply supported FG plates. The computed results are compared with 3D and quasi-3D solutions and those provided by other plate theories. Numerical results demonstrate that the proposed HSDT can achieve the same accuracy of the conventional HSDTs which have more number of variables.

키워드

참고문헌

  1. Ait Atmane, H., Tounsi, A., Mechab, I, Adda Bedia, EA. (2010), "Free vibration analysis offunctionally graded plates resting on Winkler-Pasternak elastic foundations using a new shear deformation theory", Int. J. Mech. Mater. Des., 6(2), 113-121. https://doi.org/10.1007/s10999-010-9110-x
  2. Ait Atmane, H., Tounsi, A., Bernard, F. (2017), "Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations", Int. J. Mech. Mater. Des., 13(1), 71-84. https://doi.org/10.1007/s10999-015-9318-x
  3. Ait Amar Meziane, M., Abdelaziz, H.H. and Tounsi, A. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318. https://doi.org/10.1177/1099636214526852.
  4. Ait Yahia, S., Ait Atmane, H., Houari, M.S.A., Tounsi, A. (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., 53(6), 1143-1165. https://doi.org/10.12989/sem.2015.53.6.1143.
  5. Akavci, S.S. (2016), "Mechanical behavior of functionally graded sandwich plates on elastic foundation", Compos. Part B, 96, 136-152. https://doi.org/10.1016/j.compositesb.2016.04.035.
  6. Akbas, S.D. (2016), "Forced vibration responses of functionally graded viscoelastic beams under thermal environment", Int. J. Innov. Res. Sci. Eng. Technol., 5(12), 36-46.
  7. Aldousari, S.M. (2017), "Bending analysis of different material distributions of functionally graded beam", Appl. Phys. A: Mater. Sci. Process., 123(4), 296. https://doi.org/10.1007/s00339-017-0854-0
  8. Arani, A.J., Kolahchi, R. (2016), "Buckling analysis of embedded concrete columns armed with carbon nanotubes", Comput. Concrete, 17(5), 567-578. https://doi.org/10.12989/cac.2016.17.5.567
  9. Baseri, V., Jafari, G.S., Kolahchi, R. (2016), "Analytical solution for buckling of embedded laminated plates based on higher order shear deformation plate theory", Steel Compos. Struct., 21(4), 883-919. https://doi.org/10.12989/scs.2016.21.4.88
  10. Belabed, Z., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. and Anwar Beg, O. (2014), "An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates", Compos. Part B, 60, 274-283. https://doi.org/10.1016/j.compositesb.2013.12.057.
  11. Beldjelili, Y., Tounsi, A., & Mahmoud, S.R. (2016), "Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory", Smart Struct. Syst., 18(4), 755-786. https://doi.org/10.12989/sss.2016.18.4.755.
  12. Bellifa, H., Benrahou, K.H., Hadji, L., Houari, M.S.A. and Tounsi, A. (2016), "Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position", J. Braz. Soc. Mech. Sci. Eng., 38(1), 265-275. https://doi.org/10.1007/s40430-015-0354-0
  13. Benahmed, A., Houari, M.S.A., Benyoucef, S., Belakhdar, K., Tounsi, A. (2017), "A novel quasi-3D hyperbolic shear deformation theory for functionally graded thick rectangular plates on elastic foundation", Geomech. Eng., 12(1), 9-34. https://doi.org/10.12989/gae.2017.12.1.009
  14. Benbakhti, A., Bachir Bouiadjra, M., Retiel, N., Tounsi, A. (2016), "A new five unknown quasi-3D type HSDT for thermomechanical bending analysis of FGM sandwich plates", Steel Compos. Struct., 22(5), 975-999. https://doi.org/10.12989/scs.2016.22.5.975
  15. Benchohra, M., Driz, H., Bakora, A., Tounsi, A., Adda Bedia, E.A., Mahmoud, S.R. (2017), "A new quasi-3D sinusoidal shear deformation theory for functionally graded plates", Struct. Eng. Mech., 65(1), 19-31. https://doi.org/10.12989/SEM.2018.65.1.019
  16. Bennoun, M., Houari, M.S.A. and Tounsi, A. (2016), "A novel five variable refined plate theory for vibration analysis of functionally graded sandwich plates", Mech. Adv. Mater. Struct., 23(4), 423-431. https://doi.org/10.1080/15376494.2014.984088
  17. Benveniste, Y. (1987), "A new approach to the application of Mori-Tanaka's theory in composite materials", Mech Mater, 6(2), 147-157. https://doi.org/10.1016/0167-6636(87)90005-6
  18. Benyoucef, S, Mechab, I, Tounsi, A, Fekrar, A, Ait Atmane, H, Adda Bedia, EA. (2010), "Bending of thick functionally graded plates resting on Winkler-Pasternak elastic foundations", Mech. Compos. Mater., 46(4), 425-434. https://doi.org/10.1007/s11029-010-9159-5.
  19. Bessaim, A., Houari, M.S.A., Tounsi, A., Mahmoud, S.R., Adda Bedia, E.A. (2013), "A new higher order shear and normal deformation theory for the static and free vibration analysis of sandwich plates with functionally graded isotropic face sheets", J. Sandw. Struct. Mater., 15, 671-703. https://doi.org/10.1177/1099636213498888
  20. Bilouei, B.S., Kolahchi, R., Bidgoli, M.R. (2016), "Buckling of concrete columns retrofitted with Nano-Fiber Reinforced Polymer (NFRP)", Comput. Concrete, 18(5), 1053-1063. https://doi.org/10.12989/cac.2016.18.5.1053
  21. Birman, V., Byrd, LW. (2007), "Modeling and analysis of functionally graded materials and structures", Appl. Mech. Rev, 60, 195. https://doi.org/10.1115/1.2777164
  22. Bouafia, K., Kaci, A., Houari, M.S.A., Benzair, A., Tounsi, A. (2017), "A nonlocal quasi-3D theory for bending and free flexural vibration behaviors of functionally graded nanobeams", Smart Struct. Syst., 19(2), 115-126. https://doi.org/10.12989/sss.2017.19.2.115
  23. Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013) "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., 14(1), 85-104. https://doi.org/10.12989/scs.2013.14.1.085
  24. Bouderba, B., Houari, M.S.A. and Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., 58(3), 397-422. https://doi.org/10.12989/sem.2016.58.3.397.
  25. Boukhari, A., Ait Atmane, H., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2016), "An efficient shear deformation theory for wave propagation of functionally graded material plates", Struct. Eng. Mech., 57(5), 837-859. https://doi.org/10.12989/sem.2016.57.5.837.
  26. Bourada, M., Kaci, A., Houari, M.S.A. and Tounsi, A. (2015), "A new simple shear and normal deformations theory for functionally graded beams", Steel Compos. Struct., 18(2), 409-423. https://doi.org/10.12989/scs.2015.18.2.409.
  27. Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2014), "A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates", Int. J. Comput. Meth., 11(6), 1350082. https://doi.org/10.1142/S0219876213500825
  28. Bousahla, A.A., Benyoucef, S., Tounsi, A. and Mahmoud, S.R. (2016), "On thermal stability of plates with functionally graded coefficient of thermal expansion", Struct. Eng. Mech., 60(2), 313-335. https://doi.org/10.12989/sem.2016.60.2.313.
  29. Carrera, E, Brischetto, S, Robaldo, A. (2008), "Variable kinematic model for the analysis of functionally graded material plates", AIAA J, 46(1), 194-203. https://doi.org/10.2514/1.32490
  30. Carrera, E, Brischetto, S, Cinefra, M, Soave, M. (2011), "Effects of thickness stretching in functionally graded plates and shells", Compos. Part B, 42(2), 123-133. https://doi.org/10.1016/j.compositesb.2010.10.005
  31. Chaabane, L.A., Bourada, F., Sekkal, M., Zerouati, S., Zaoui, F. Z., Tounsi, A., Derras, A., Bousahla, A.A., Tounsi, A. (2019), "Analytical study of bending and free vibration responses of functionally graded beams resting on elastic foundation", Struct. Eng. Mech., 71(2), 185-196. https://doi.org/10.12 989/sem.2019.71.2.185 https://doi.org/10.12989/SEM.2019.71.2.185
  32. Chen, CS, Hsu, CY, Tzou, GJ. (2009), "Vibration and stability of functionally graded plates based on a higher-order deformation theory", J. Reinf. Plast. Compos., 28(10), 1215-1234. https://doi.org/10.1177/0731684408088884
  33. Draiche, K., Tounsi, A., Mahmoud, S.R. (2016), "A refined theory with stretching effect for the flexure analysis of laminated composite plates", Geomech. Eng., 11(5), 671-690. https://doi.org/10.12989/gae.2016.11.5.671
  34. Ebrahimi, F., Rastgoo, A. and Atai, A.A. (2009a), "A theoretical analysis of smart moderately thick shear deformable annular functionally graded plate", Eur. J. Mech. A/Solids, 28(5), 962-973. https://doi.org/10.1016/j.euromechsol.2008.12.008
  35. Ebrahimi, F., Naei, M.H. and Rastgoo, A. (2009b), "Geometrically nonlinear vibration analysis of piezoelectrically actuated FGM plate with an initial large deformation", J. mech. sci. technol., 23(8), 2107-2124. https://doi.org/10.1007/s12206-009-0358-8
  36. Eltaher, M.A., Alshorbagy, A.E., Mahmoud, F.F. (2013), "Determination of neutral axis position and its effect on natural frequencies of functionally graded macro/nanobeams", Compos. Struct., 99, 193-201. https://doi.org/10.1016/j.compstruct.2012.11.039
  37. Fekrar, A., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. (2014), "A new five-unknown refined theory based on neutral surface position for bending analysis of exponential graded plates", Meccanica, 49, 795-810. https://doi.org/10.1007/s11012-013-9827-3
  38. Guerroudj, H.Z., Yeghnem, R., Kaci, A., Zaoui, F.Z., Benyoucef, S., Tounsi, A. (2018), "Eigenfrequencies of advanced composite plates using an efficient hybrid quasi-3D shear deformation theory", Smart Struct. Syst., 22(1), 121-132. https://doi.org/10.12989/sss.2018.22.1.121
  39. Hamidi, A., Houari, M.S.A., Mahmoud, S.R. and Tounsi, A. (2015), "A sinusoidal plate theory with 5-unknowns and stretching effect for thermomechanical bending of functionally graded sandwich plates", Steel Compos. Struct., 18(1), 235-253. https://doi.org/10.12989/scs.2015.18.1.235
  40. Hebali, H., Tounsi, A., Houari, M.S.A., Bessaim, A. and Adda Bedia, E.A. (2014), "A new quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", J. Eng. Mech. ASCE, 140, 374-383. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000665
  41. Hosseini-Hashemi, S, Fadaee, M, Atashipour, SR. (2011a), "Study on the free vibration of thick functionally graded rectangular plates according to a new exact closed form procedure", Compos. Struct., 93(2), 722-735. https://doi.org/10.1016/j.compstruct.2010.08.007
  42. Hosseini-Hashemi, S, Fadaee, M, Atashipour, SR. (2011b), "A new exact analytical approach for free vibration of Reissner-Mindlin functionally graded rectangular plates", Int. J. Mech. Sci., 53(1), 11-22. https://doi.org/10.1016/j.ijmecsci.2010.10.002
  43. Kar, V.R., Panda, S.K., Mahapatra, T.R. (2016a), "Thermal buckling behaviour of shear deformable functionally graded single/doubly curved shell panel with TD and TID properties", Adv. Mater. Res., 5(4), 205-221. https://doi.org/10.12989/amr.2016.5.4.205
  44. Kar, V.R., Mahapatra, T.R., Panda, S.K. (2016b), "Effect of different temperature load on thermal postbuckling behaviour of functionally graded shallow curved shell panels", Compos. Struct., 160(15), 1236-1247. https://doi.org/10.1016/j.compstruct.2016.10.125
  45. Kar, V.R., Mahapatra, T.R., Panda, S.K. (2015), "Nonlinear flexural analysis of laminated composite flat panel under hygro-thermo-mechanical loading", Steel Compos. Struct., 19(4), 1011-1033. https://doi.org/10.12989/scs.2015.18.3.693
  46. Kitipornchai, S, Yang, J, Liew, KM. (2006), "Random vibration of the functionally graded laminates in thermal environments", Comput. Methods Appl. Mech. Eng., 195(9-12), 1075-1095. https://doi.org/10.1016/j.cma.2005.01.016
  47. Kolahchi, R. (2017), "A comparative study on the bending, vibration and buckling of viscoelastic sandwich nano-plates based on different nonlocal theories using DC, HDQ and DQ methods", Aerosp. Sci. Technol., 66, 235-248. https://doi.org/10.1016/j.ast.2017.03.016
  48. Kolahchi, R., Hosseini, H., Esmailpour, M. (2016a), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocalpiezoelasticity theories", Compos. Struct., 157, 174-186. https://doi.org/10.1016/j.compstruct.2016.08.032
  49. Kolahchi, R., Moniri Bidgoli, A.M. (2016), "Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes", Appl. Math. Mech. -Engl. Ed., 37(2), 265-274. https://doi.org/10.1007/s10483-016-2030-8
  50. Kolahchi, R., Safari, M., Esmailpour, M. (2016b), "Dynamic stability analysis of temperaturedependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023
  51. Kolahchi, R., Zarei, M.S., Hajmohammad, M.H., Oskouei, A.N. (2017a), "Visco-nonlocal-refined Zigzag theories for dynamic buckling of laminated nanoplates using differential cubature-Bolotin methods", Thin-Wall. Struct., 113, 162-169. https://doi.org/10.1016/j.tws.2017.01.016
  52. Kolahchi, R., Zarei, M.S., Hajmohammad, M.H., Nouri, A. (2017b), "Wave propagation of embedded viscoelastic FG-CNT-reinforced sandwich plates integrated with sensor and actuator based on refined zigzag theory", Int. J. Mech. Sci., 130, 534-545. https://doi.org/10.1016/j.ijmecsci.2017.06.039
  53. Larbi Chaht, F., Kaci, A., Houari, M.S.A., Tounsi, A., Anwar Beg, O., Mahmoud, S.R. (2015), "Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect", Steel Compos. Struct., 18(2), 425-442. https://doi.org/10.12989/scs.2015.18.2.425
  54. Madani, H., Hosseini, H., Shokravi, M. (2016), "Differential cubature method for vibration analysis of embedded FG-CNT-reinforced piezoelectric cylindrical shells subjected to uniform and non-uniform temperature distributions", Steel Compos. Struct., 22(4), 889-913. https://doi.org/10.12989/scs.2016.22.4.889
  55. Mahapatra, T.R., Kar, V.R., Panda, S.K., Mehar, K. (2017), "Nonlinear thermoelastic deflection of temperature-dependent FGM curved shallow shell under nonlinear thermal loading", J. Therm. Stresses, 40(9), 1184-1199. https://doi.org/10.1080/01495739.2017.1302788
  56. Mahapatra, T.R., Kar, V.R., Panda, S.K. (2016a), "Large amplitude vibration analysis of laminated composite spherical panels under hygrothermal environment", Int. J. Struct. Stab. Dyn., 16(3), 1450105. https://doi.org/10.1142/S0219455414501053
  57. Mahapatra, T.R., Panda, S.K., Kar, V.R. (2016b), "Nonlinear hygro-thermo-elastic vibration analysis of doubly curved composite shell panel using finite element micromechanical model", Mech. Advanced Mater. Struct., 23(11), 1343-1359. https://doi.org/10.1142/S0219455414501053
  58. Mahapatra, T.R., Kar, V.R., Panda, S.K. (2016c), "Large amplitude bending behaviour of laminated composite curved panels", Eng. Comput., 33(1), 116-138. https://doi.org/10.1108/EC-05-2014-0119
  59. Mahapatra, T.R., Panda, S.K., Kar, V.R. (2016d), "Nonlinear flexural analysis of laminated composite panel under hygro-thermo-mechanical loading - A micromechanical approach", Int. J. Comput. Method, 33(1), 116-138. https://doi.org/10.1142/S0219876216500158
  60. Mahapatra, T.R., Panda, S.K., Kar, V.R. (2016e), "Geometrically nonlinear flexural analysis of hygrothermo-elastic laminated composite doubly curved shell panel", Int. J. Mech. Mater. Des., 12(2), 153-171. https://doi.org/10.1007/s10999-015-9299-9
  61. Mahapatra, T.R., Panda, S.K. (2016), "Nonlinear free vibration analysis of laminated composite spherical shell panel under elevated hygrothermal environment: A micromechanical approach", Aerosp. Sci. Technol., 49, 276-288. https://doi.org/10.1016/j.ast.2015.12.018
  62. Mahapatra, T.R., Kar, V.R., Panda, S.K. (2015), "Nonlinear free vibration analysis of laminated composite doubly curved shell panel in hygrothermal environment", J. Sandw. Struct. Mater., 17(5), 511-545. https://doi.org/10.1177/1099636215577363
  63. Mahapatra, T.R., Panda, S.K. (2015), "Thermoelastic vibration analysis of laminated doubly curved shallow panels using non-linear FEM", J. Therm. Stresses, 38(1), 39-68. https://doi.org/10.1080/01495739.2014.976125
  64. Mahi, A., Adda Bedia, E.A. and Tounsi, A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model., 39, 2489-2508. https://doi.org/10.1016/j.apm.2014.10.045
  65. Mahmoud, SR, Abd-Alla, AM, Tounsi, A., Marin, M. (2015), "The problem of wave propagation in magneto-rotating orthotropic non-homogeneous medium", J. Vib. Control, 21(16), 3281-3291. https://doi.org/10.1177/1077546314521443
  66. Mantari, JL, Oktem, AS, Guedes Soares, C. (2012), "Bending response of functionally graded plates by using a new higher order shear deformation theory", Compos. Struct., 94(2), 714-723. https://doi.org/10.1016/j.compstruct.2011.09.007
  67. Mantari, JL, Guedes Soares, C. (2012a), "Generalized hybrid quasi-3D shear deformation theory for the static analysis of advanced composite plates", Compos. Struct., 94(8), 2561-2575. https://doi.org/10.1016/j.compstruct.2012.02.019
  68. Mantari, JL, Guedes Soares, C. (2012b), "Bending analysis of thick exponentially graded plates using a new trigonometric higher order shear deformation theory", Compos. Struct., 94(6), 1991-2000. https://doi.org/10.1016/j.compstruct.2012.01.005
  69. Matsunaga, H. (2008), "Free vibration and stability of functionally graded plates according to a 2-D higher-order deformation theory", Compos. Struct., 82(4), 499-512. https://doi.org/10.1016/j.compstruct.2007.01.030
  70. Meftah, A., Bakora, A., Zaoui, F.Z., Tounsi, A. and Adda Bedia, E.A. (2017), "A non-polynomial four variable refined plate theory for free vibration of functionally graded thick rectangular plates on elastic foundation", Steel Compos. Struct., 23(3), 317-330. https://doi.org/10.12989/scs.2017.23.3.317
  71. Mehar, K., Panda, S.K. (2017), "Thermoelastic nonlinear frequency analysis of CNT reinforced functionally graded sandwich structure", Eur. J. Mech. -A/Solids, 65, 384-396. https://doi.org/10.1016/j.euromechsol.2017.05.005
  72. Meksi, A., Benyoucef, S., Houari, M.S.A. and Tounsi, A. (2015), "A simple shear deformation theory based on neutral surface position for functionally graded plates resting on Pasternak elastic foundations", Struct. Eng. Mech., 53(6), 1215-1240. https://doi.org/10.12989/sem.2015.53.6.1215
  73. Meradjah, M., Kaci, A., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. (2015), "A new higher order shear and normal deformation theory for functionally graded beams", Steel Compos. Struct., 18(3), 793-809. https://doi.org/10.12989/scs.2015.18.3.793
  74. Meradjah, M., Bouakkaz, K., Zaoui, F.Z., Tounsi, A. (2018), "A refined quasi-3D hybrid-type higher order shear deformation theory for bending and Free vibration analysis of advanced composites beams". Wind Struct., 27(4), 269-282. https://doi.org/10.1298 9/was.2018.27.4.269 https://doi.org/10.12989/WAS.2018.27.4.269
  75. Mindlin, R.D. (1951), "Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates", ASME J. Appl. Mech., 18, 31-38. https://doi.org/10.1115/1.4010217
  76. Mori, T, Tanaka, K. (1973), "Average stress in matrix and average elastic energy of materials with misfitting inclusions", Acta Metall., 21(5), 571-574. https://doi.org/10.1016/0001-6160(73)90064-3
  77. Neves, AMA, Ferreira, AJM, Carrera, E, Roque, CMC, Cinefra, M, Jorge, RMN, et al. (2012a), "A quasi-3D sinusoidal shear deformation theory for the static and free vibration analysis of functionally graded plates", Compos. Part B, 43(2), 711-725. https://doi.org/10.1016/j.compositesb.2011.08.009
  78. Neves, AMA, Ferreira, AJM, Carrera, E, Cinefra, M, Roque, CMC, Jorge, RMN, et al. (2012b), "A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", Compos. Struct., 94(5), 1814-1825. https://doi.org/10.1016/j.compstruct.2011.12.005
  79. Neves, AMA, Ferreira, AJM, Carrera, E, Cinefra, M, Roque, CMC, Jorge, RMN, et al. (2013), "Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique", Compos. Part B, 44(1), 657-674. https://doi.org/10.1016/j.compositesb.2012.01.089
  80. Pradyumna, S, Bandyopadhyay, JN. (2008), "Free vibration analysis of functionally graded curved panels using a higherorder finite element formulation", J. Sound Vib., 318(1-2), 176-192. https://doi.org/10.1016/j.jsv.2008.03.056
  81. Rahmani, O., Refaeinejad, V., Hosseini, S.A.H. (2017), "Assessment of various nonlocal higher order theories for the bending and buckling behavior of functionally graded nanobeams", Steel Compos. Struct., 23(3), 339-350. https://doi.org/10.12989/scs.2017.23.3.339
  82. Raminnea, M., Biglari, H., Vakili Tahami, F. (2016), "Nonlinear higher order Reddy theory for temperature- dependent vibration and instability of embedded functionally graded pipes conveying fluid-nanoparticle mixture", Struct. Eng. Mech., 59(1), 153-186. https://doi.org/10.12989/sem.2016.59.1.153
  83. Reddy, J.N. (2000), "Analysis of functionally graded plates", Int. J. Numer. Methods Eng., 47(1-3), 663-684. https://doi.org/10.1002/(SICI)1097-0207(20000110/30)47:1/3<663::AID-NME 787>3.0.CO;2-8
  84. Reddy, JN. (2011), "A general nonlinear third-order theory of functionally graded plates", Int. J. Aerosp. Lightw. Struct., 1(1), 1-21. https://doi.org/10.3850/S201042861100002X
  85. Sahoo, S.S., Pand, S.K., Mahapatra, T.R. (2016), "Static, free vibration and transient response of laminated composite curved shallow panel - An experimental approach", Eur. J. Mech. -A/Solids, 59, 95-113. https://doi.org/10.1016/j.euromechsol.2016.03.014
  86. Swaminathan, K. and Naveenkumar, D.T. (2014), "Higher order refined computational models for the stability analysis of FGM plates: Analytical solutions", Eur. J. Mech. A/Solid., 47, 349-361. https://doi.org/10.1016/j.euromechsol.2014.06.003
  87. Talha, M, Singh, BN. (2010), "Static response and free vibration analysis of FGM plates using higher order shear deformation theory", Appl. Math. Model., 34(12), 3991-4011. https://doi.org/10.1016/j.apm.2010.03.034
  88. Thai, H.T., Kim, S.E. (2013), "A simple higher-order shear deformation theory for bending and free vibration analysis of functionally graded plates", Compos. Struct., 96, 165-173. https://doi.org/10.1016/j.compstruct.2012.08.025
  89. Tounsi, A., Houari, M.S.A., Benyoucef, S. and Adda Bedia, E.A. (2013), "A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates", Aerosp. Sci. Tech., 24, 209-220. https://doi.org/10.1016/j.ast.2011.11.009
  90. Vel, SS, Batra, RC. (2004), "Three-dimensional exact solution for the vibration of functionally graded rectangular plates", J. Sound Vib., 272(3-5), 703-730. https://doi.org/10.1016/S0022-460X(03)00412-7
  91. Wu, CP, Chiu, KH, Wang, YM. (2011), "RMVT-based meshless collocation and elementfree Galerkin methods for the quasi-3D analysis of multilayered composite and FGM plates", Compos. Struct., 93(2), 923-943. https://doi.org/10.1016/j.compstruct.2010.11.015
  92. Wu, CP, Li, HY. (2010), "An RMVT-based third-order shear deformation theory of multilayered functionally graded material plates", Compos. Struct., 92(10), 2591-2605. https://doi.org/10.1016/j.compstruct.2010.01.022
  93. Xiang, S, Jin, YX, Bi, ZY, Jiang, SX, Yang, MS. (2011), "A n-order shear deformation theory for free vibration of functionally graded and composite sandwich plates", Compos. Struct., 93(11), 2826-2832. https://doi.org/10.1016/j.compstruct.2011.05.022
  94. Yang, J, Liew, KM, Kitipornchai, S. (2005), "Stochastic analysis of compositionally graded plates with system randomness under static loading", Int. J. Mech. Sci., 47(10), 1519-1541. https://doi.org/10.1016/j.ijmecsci.2005.06.006
  95. Younsi, A., Tounsi, A., Zaoui, F.Z., Bousahla, A.A., Mahmoud S.R. (2018), "Novel quasi-3D and 2D shear deformation theories for bending and free vibration analysis of FGM plates", Geomech. Eng., 14(6), 519-532. https://doi.org/10.12989/gae.2018.14.6.519
  96. Zamanian, M., Kolahchi, R., Bidgoli, M.R. (2017), "Agglomeration effects on the buckling behavior of embedded concrete columns reinforced with SiO2 nano-particles", Wind Struct., 24(1), 43-57. https://doi.org/10.12989/was.2017.24.1.043
  97. Zaoui, F.Z., Hanifi Hachemi Amar, L., Younsi A., Meradjah M., Tounsi, A., and Ouinas, Dj. (2017a), "Free vibration analysis of functionally graded beams using a higher-order shear deformation theory", Math. Model. Eng. Problems, 4(1):7-12. https://doi.org/10.18280/mmep.040102
  98. Zaoui, F.Z., Tounsi, A., and Ouinas, Dj. (2017b), "Free vibration of functionally graded plates resting on elastic foundations based on quasi-3D hybrid-type higher order shear deformation theory", Smart Struct. Syst., 20(4): 509-524. https://doi.org/10.12989/sss.2017.20.4.509
  99. Zaoui, F.Z., Ouinas, D., Tounsi, A. (2019), "New 2D and quasi-3D shear deformation theories for free vibration of functionally graded plates on elastic foundations", Compos. Part B, 159, 231-247. https://doi.org/10.1016/j.compositesb.2018.09.051
  100. Zemri, A., Houari, M.S.A., Bousahla, A.A. and Tounsi, A. (2015), "A mechanical response of functionally graded nanoscale beam: an assessment of a refined nonlocal shear deformation theory beam theory", Struct. Eng. Mech., 54(4), 693-710. https://doi.org/10.12989/sem.2015.54.4.693
  101. Zenkour, AM. (2006), "Generalized shear deformation theory for bending analysis of functionally graded plates", Appl. Math. Model., 30(1), 67-84. https://doi.org/10.1016/j.apm.2005.03.009
  102. Zenkour, AM. (2007), "Benchmark trigonometric and 3-D elasticity solutions for an exponentially graded thick rectangular plate", Arch. Appl. Mech., 77(4), 197-214. https://doi.org/10.1007/s00419-006-0084-y
  103. Zidi, M., Tounsi, A., Houari, M.S.A., Adda Bedia, E.A. and Anwar Beg, O. (2014), "Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory", Aerosp. Sci. Technol., 34, 24-34. https://doi.org/10.1016/j.ast.2014.02.001
  104. Zidi, M., Houari, M.S.A., Tounsi, A., Bessaim, A., Mahmoud, S.R. (2017), "A novel simple two-unknown hyperbolic shear deformation theory for functionally graded beams", Struct. Eng. Mech., 64(2), 145-153. https://doi.org/10.12989/sem.2017.64.2.145