Abstract
The support policy of Micro manufacturers clusters should reflect the regional characteristics of Micro manufacturers clusters, but only similar policies are proposed based on the normal collection of information from related companies. Since the regional characteristics of Micro manufacturers clusters are not understood, they are not reflected in the support policy. Therefore, this study analyzed the characteristics of Micro manufacturers clusters as the formation factors of localization, networking/embeddedness, and innovation synergy/collective learning which are the characteristics of clusters, and applied the development stage based on the analyzed formation factors. Since regional characteristics may be different in the same industry, Micro manufacturers clusters in Changsin and Jangwi, which are representative clusters of apparel sewing industry in Seoul, were compared and studied in terms of regional characteristics and developmental stages. As a result of analyzing the characteristics of Apparel Sewing Micro manufacturers clusters, clusters of peers were found to be higher in Changsin than in Jangwi in localization. However, in the synergy and group learning, the Changsin area was mainly centered on designers and the Jangwi area was centered on Micro manufacturers, the Changsin area was active while the Jangwi area was passive in participating in fairs and seminars, and in sample and production. As a result of examining the two formation factors, the development stage of Micro manufacturers clusters in the two regions is progressing beyond the industrial district in the case of Micro manufacturers clusters in Changsin apparel sewing, and the Micro manufacturers clusters in the Jangwi apparel sewing are analyzed to stay in the industrial district. Innovative and long-established garment sewing clusters suggest that the government's support policy needs to reflect the characteristics and development stages of the two regions for sustainable growth.
소공인클러스터의 지원정책은 소공인클러스터의 지역적 특성을 반영해야 하지만, 유관기업의 통상적인 정보 수집을 기반으로 비슷한 정책만 내놓고 있다. 소공인클러스터의 지역적 특성이 파악이 안 되므로 지원정책에 반영이 되지 않고 있는 실정이다. 이에 본 연구는 소공인클러스터의 특성을 클러스터의 특징인 국지화, 네트워킹/착근성, 혁신시너지/집단학습의 형성요소로 분석하였으며, 분석된 형성요소를 기반으로 발달단계를 적용해 보았다. 같은 업종이어도 지역적 특성이 다를 수 있으므로, 서울시 의류봉제업의 대표적인 클러스터인 창신지역과 장위지역의 소공인클러스터를 지역적 특성과 발달단계로 비교 연구하였다. 의류봉제 소공인클러스터의 특성 분석 결과, 국지화에서 동종업체 집적은 창신지역이 장위지역보다 높게 나타났으며, 네트워킹/착근성에서 두 지역 모두 잘 형성되어 있었다. 하지만 혁신시너지/집단학습의 협업에서 창신지역은 디자이너 중심으로 장위지역은 소공인 중심으로 이루어져 있고, 박람회 및 세미나 참여와 샘플 및 제작에 있어 창신지역은 적극적인 반면 장위지역은 소극적으로 나타났다. 두 형성요소로 살펴본 결과, 두 지역의 소공인클러스터의 발달단계는 창신 의류봉제 소공인클러스터의 경우 산업지구를 넘어 혁신지구로 진행되고 있고, 장위 의류봉제 소공인클러스터는 산업지구에 머물러 있는 것으로 분석된다. 창신과 장위 의류봉제 소공인클러스터는 지속적인 성장을 위해서는 두 지역의 특성과 발달단계를 반영한 정부의 지원정책이 필요하다고 제언한다.