Structural Engineering and Mechanics

  • 제73권3호
  • /
  • Pages.353-365
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Timber-FRP composite beam subjected to negative bending

  • 투고 : 2019.02.28
  • 심사 : 2019.10.13
  • 발행 : 2020.02.10
⟨ 이전 논문 다음 논문 ⟩

초록

In the previous studies, the authors proposed the use of laminated veneer lumber - carbon fiber reinforced polymer (LVL-CFRP) composite beams for structural application. Bond strength of the LVL-to-CFRP interface and flexural strengthening schemes to increase the bending capacity subjected to positive and negative moment were discussed in the previous works. In this article, theoretical models are proposed to predict the moment capacity when the LVL-CFRP beams are subjected to negative moment. Two common failure modes - CFRP fracture and debonding of CFRP are considered. The non-linear model proposed for positive moment is modified for negative moment to determine the section moment capacity. For the debonding based failure, previously developed bond strength model for CFRP-to-LVL interface is implemented. The theoretical models are validated against the experimental results and then use to determine the moment-rotation behaviour and rotational rigidity to compare the efficacy of various strengthening techniques. It is found that combined use of bi- and uni-directional CFRP U-wrap at the joint performs well in terms of both moment capacity and rotational rigidity.

키워드

과제정보

연구 과제 주관 기관 : Deakin University

참고문헌

  1. Alhayek, H. and Svecova, D. (2012), "Flexural stiffness and strength of GFRP-reinforced timber beams", J. Compos. Construct., 16(3), 245-252. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000261
  2. Allotey, N. and Foschi, R. (2005), "Frictional effects on the cyclic response of laterally loaded timber fasteners", Struct. Eng. Mech., 21(1), 1-18. https://doi.org/10.12989/sem.2005.21.1.001
  3. Biscaia, H.C., Chastre, C., Cruz, D. and Franco, N. (2016), "Flexural Strengthening of Old Timber Floors with Laminated Carbon Fiber-Reinforced Polymers", J. Compos. Construct., 21(1). https://doi.org/10.1061/(ASCE)CC.1943-5614.0000731.
  4. Biscaia, H.C., Chastre, C., Cruz, D. and Viegas, A. (2017), "Prediction of the interfacial performance of CFRP laminates and old timber bonded joints with different strengthening techniques", Compos. Part B Eng., 108, 1-17. https://doi.org/10.1016/j.compositesb.2016.09.097
  5. Biscaia, H.C., Cruz, D. and Chastre, C. (2016), "Analysis of the debonding process of CFRP-to-timber interfaces", Consruct. Build. Mater., 113, 96-112. https://doi.org/10.1016/j.conbuildmat.2016.03.033
  6. Chun, Q., Balen, K.V. and Pan, J. (2016), "Flexural Performance of Small Fir and Pine Timber Beams Strengthened With Near-Surface Mounted Carbon-Fiber-Reinforced Polymer (NSM CFRP) Plates and Rods", J. Architect. Heritage, 10(1), 106-117. https://doi.org/10.1080/15583058.2014.971195
  7. D'Ambrisi, A., Focacci, F. and Luciano, R. (2014), "Experimental investigation on flexural behavior of timber beams repaired with CFRP plates", Compos. Struct., 108, 720-728. https://doi.org/10.1016/j.compstruct.2013.10.005
  8. De la Rosa Garcia, P., Escamilla, A.C. and Garcia, M.N.G. (2013), "Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials", Compos. Part B Eng., 55, 528-536. https://doi.org/10.1016/j.compositesb.2013.07.016
  9. De la Rosa Garcia, P., Escamilla, A.C. and Garcia, M.N.G. (2016), "Analysis of the flexural stiffness of timber beams reinforced with carbon and basalt composite materials", Compos. Part B Eng., 86, 152-159. https://doi.org/10.1016/j.compositesb.2015.10.003
  10. De Lorenzis, L., Scialpi, V. and La Tegola, A. (2005), "Analytical and experimental study on bonded-in CFRP bars in glulam timber", Compos. Part B Eng., 36(4), 279-289. https://doi.org/10.1016/j.compositesb.2004.11.005
  11. Fiorelli, J. and Dias, A.A. (2003), "Analysis of the strength and stiffness of timber beams reinforced with carbon fiber and glass fiber", Mater. Res., 6(2), 193-202. http://dx.doi.org/10.1590/S1516-14392003000200014
  12. Fossetti, M., Minafo, G. and Papia, M. (2015), "Flexural behaviour of glulam timber beams reinforced with FRP cords", Consruct. Build. Mater., 95, 54-64. https://doi.org/10.1016/j.conbuildmat.2015.07.116
  13. Globa, A., Subhani, M., Moloney, J. and Al-Ameri, R. (2018), "Carbon Fiber and Structural Timber Composites for Engineering and Construction", J. Architect. Eng., 24(3). https://doi.org/10.1061/(ASCE)AE.1943-5568.0000318.
  14. Guan, Z. and Rodd, P. (2003), "Modelling of timber joints made with steel dowels and locally reinforced by DVW discs", Struct. Eng. Mech., 16(4), 391-404. https://doi.org/10.12989/sem.2003.16.4.391
  15. Juvandes, L. and Barbosa, R. (2012), "Bond Analysis of Timber Structures Strengthened with FRP Systems", Strain, 48(2), 124-135. https://doi.org/10.1111/j.1475-1305.2011.00804.x
  16. Khelifa, M., Auchet, S., Meausoone, P.J. and Celzard, A. (2015), "Finite element analysis of flexural strengthening of timber beams with Carbon Fibre-Reinforced Polymers", Eng. Struct., 101, 364-375. https://doi.org/10.1016/j.engstruct.2015.07.046
  17. Khelifa, M. and Celzard, A. (2014), "Numerical analysis of flexural strengthening of timber beams reinforced with CFRP strips", Compos. Struct., 111, 393-400. https://doi.org/10.1016/j.compstruct.2014.01.011
  18. Khelifa, M., Lahouar, M.A. and Celzard, A. (2015), "Flexural strengthening of finger-jointed Spruce timber beams with CFRP", J. Adhesion Sci. Technol., 29(19), 2104-2116. https://doi.org/10.1080/01694243.2015.1057395
  19. Li, Y.-F., Xie, Y.-M. and Tsai, M.-J. (2009), "Enhancement of the flexural performance of retrofitted wood beams using CFRP composite sheets", Consruct. Build. Mater., 23(1), 411-422. https://doi.org/10.1016/j.conbuildmat.2007.11.005
  20. Micelli, F., Scialpi, V. and La Tegola, A. (2005), "Flexural reinforcement of glulam timber beams and joints with carbon fiber-reinforced polymer rods", J. Compos. Construct., 9(4), 337-347. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:4(337)
  21. Miljanovic, S. and Zlatar, M. (2015), "Theoretical and experimental research of external prestressed timber beams in variable moisture conditions", Coupled Syst. Mech., 4(2), 191-209. https://doi.org/10.12989/csm.2015.4.2.191
  22. Nowak, T.P., Jasienko, J. and Czepizak, D. (2013), "Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips", Consruct. Build. Mater., 40, 197-206. https://doi.org/10.1016/j.conbuildmat.2012.09.106
  23. Raftery, G.M. and Harte, A.M. (2011), "Low-grade glued laminated timber reinforced with FRP plate", Compos. Part B Eng., 42(4), 724-735. https://doi.org/10.1016/j.compositesb.2011.01.029
  24. Schober, K.-U., Harte, A.M., Kliger, R., Jockwer, R., Xu, Q. and Chen, J.-F. (2015), "FRP reinforcement of timber structures", Consruct. Build. Mater., 97, 106-118. https://doi.org/10.1016/j.conbuildmat.2015.06.020
  25. Schober, K. and Rautenstrauch, K. (2005). "Experimental investigation on flexural strengthening of timber structures with CFRP", Proceedings of the International Symposium on Bond Behavior of FRP in Structures, Hong Kong, December.
  26. Smith, S.T. (2011), Strengthening of concrete, metallic and timber construction materials with FRP composites, Springer, Berlin, Germany.
  27. Subhani, M., Globa, A., Al-Ameri, R. and Moloney, J. (2017), "Effect of grain orientation on the CFRP-to-LVL bond", Compos. Part B Eng., 129, 187-197. https://doi.org/10.1016/j.compositesb.2017.07.062
  28. Subhani, M., Globa, A., Al-Ameri, R. and Moloney, J. (2017), "Flexural strengthening of LVL beam using CFRP", Consruct. Build. Mater., 150, 480-489. https://doi.org/10.1016/j.conbuildmat.2017.06.027
  29. Wan, J., Smith, S.T. and Qiao, P. (2011), FRP-to-softwood Joints: Experimental Investigation, Springer, Berlin, Germany.
  30. Xue, J., Qi, L., Dong, J. and Xu, D. (2018), "Analytical investigation on moment-rotation relationship of through-tenon joints with looseness in ancient timber buildings", Earthq. Struct., 14(3), 241-248. https://doi.org/10.12989/eas.2018.14.3.241