Advances in concrete construction

  • 제9권2호
  • /
  • Pages.115-123
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Role of fibers on the performance of geopolymer concrete exterior beam column joints

  • Raj, S. Deepa (Department of Civil Engineering, College of Engineering Trivandrum) ;
  • Ganesan, N. (Department of Civil Engineering, National Institute of Technology Calicut) ;
  • Abraham, Ruby (Marian Engineering College)
  • 투고 : 2019.01.13
  • 심사 : 2019.11.26
  • 발행 : 2020.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

The performance of steel fiber reinforced geopolymer concrete beam column joints under cyclic loading was investigated. The volume fraction of fibers considered were 0.25% (19.62 kg/㎥), 0.5% (39.24 kg/㎥), 0.75% (58.86 kg/㎥) and 1% (78.48 kg/㎥). A total of fifteen specimens were prepared and tested under reverse cyclic loading. Test results were analyzed with respect to first crack load, ultimate load, energy absorption capacity, energy dissipation capacity, stiffness degradation and load deflection behavior. Test results revealed that the addition of steel fibers enhanced the performance of geopolymer concrete beam column joints significantly. The joints were analyzed using finite element software ANSYS. The analytical results were found to compare satisfactorily with the experimental values.

키워드

과제정보

연구 과제 주관 기관 : Kerala State Council for Science Technology and Environment (KSCSTE)

참고문헌

  1. Bakhrev, T. (2006), "Geopolymeric materials prepared using Class F fly ash and elevated temperature curing", Cement Concrete. Res., 35(6), 1224-1232. https://doi.org/10.1016/j.cemconres.2004.06.031.
  2. Dattreya, J.K., Rajamane, N.P., Sabhitha, D., Ambily, P.S. and Nataraja, M.C. (2011), "Flexural behavior of reinforced geopolymer concrete beams", Int. J. Civil Struct. Eng., 2(1), 138-159. https://doi.org/10.1109/ICEEOT.2016.7755347.
  3. Duxson, P., Provis, J.L., Lukey, G.C. and Van Deventer, J.S. (2007), "The role of inorganic polymer technology in the development of green concrete", Cement Concrete. Res., 37, 1590-1597. https://doi.org/10.1016/j.cemconres.2007.08.018.
  4. Ganesan, N., Abraham, R. and Raj, S.D. (2015), "Durability characteristics of steel fiber reinforced geopolymer concrete", Constr. Build. Mater., 93, 471-476. https://doi.org/10.1016/j.conbuildmat.2015.06.014.
  5. Ganesan, N., Abraham, R. and Raj, S.D. (2015), "Effect of fibres on the stress-strain behaviour of geopolymer concrete", Int. J. Earth Sci. Eng., 8(4), 256-258.
  6. Ganesan, N., Indira, P.V. and Sabeena, M.V. (2014), "Behavior of hybrid fiber reinforced concrete beam-column joints under reverse cyclic loads", Mater. Des., 54, 686-693. https://doi.org/10.1016/j.matdes.2013.08.076.
  7. Ganesan, N., Indira, P.V. and Santhakumar, A. (2013), "Engineering properties of steel fibre reinforced geopolymer concrete", Adv. Concrete Constr., 1(4), 305-318. https://doi.org/10.12989/acc2013.1.4.305.
  8. Hardjito, D. and Rangan, B.V. (2004), "On the development and properties of low calcium fly ash geopolymer concrete", ACI Mater. J., 101(6), 467-472.
  9. IS 383-1970 (2016), Specifications for Coarse and Fine Aggregate from Natural Sources for Concrete-Code of Practice, 2nd Revision, BIS, New Delhi, India.
  10. Jindal, B.B. (2018), "Feasibility study of ambient cured geopolymer concrete-A review", Adv. Concrete Constr., 6(4), 387-405. https://doi.org/10.12989/acc.2018.6.4.387.
  11. Kurtoglu, A.E., Alzeebaree, R., Aljumaili, O. and Nis, A. (2018), "Mechanical and durability Properties of fly ash and slag based geopolymer concrete", Adv. Concrete Constr., 6(4), 345-362. https://doi.org/10.12989/acc.2018.6.4.345.
  12. Lee, J.Y., Kim, J.Y. and Oh, G.J. (2009), "Strength deterioration of reinforced concrete beam -column joints subjected to cyclic loading", Eng. Struct., 31(9), 2070-2085. https://doi.org/10.1016/j.engstruct.2009.03.009.
  13. Raj, S.D., Ganesan, N., Abraham, R. and Raju, A. (2016), "Behaviour of geopolymer and conventional concrete beam column joints under reverse cyclic loading", Adv. Concrete Constr., 4(3), 161-172. http://dx.doi.org/10.12989/acc.2016.4.3.161.
  14. Rangan, B. (2006), "Studies on low calcium fly ash based geopolymer concrete", ICI J., 9-17.
  15. Saravanan, J. and Kumaran, G. (2011), "Joint shear strength of FRP reinforced concrete beam-column joints", Central Eur. J. Eng., 1(1), 89-102. https://doi.org/10.2478/s13531-011-0009-6.
  16. Sarker, P.K. (2009), "Analysis of geopolymer concrete columns", Mater. Struct., 42, 715-724. https://doi.org/10.1617/s11527-008-9415-5.
  17. Sarker, P.K. (2011), "Bond strength of reinforcing steel embedded in fly ash-based geopolymer concrete", Mater. Struct., 44, 1021-1030. https://doi.org/10.1617/s11527-010-9683-8.
  18. Shaikh, F.U. (2014), "Effect of alkali solutions on corrosion durability of geopolymer concrete", Adv. Concrete Constr., 2(2), 109-123. http://dx.doi.org/10.12989/acc.2014.2.2.109.
  19. Sofi, M., Van Deventer, J.S.J., Mendis, P.A. and Lukey, G.C. (2007), "Engineering properties of inorganic polymer concretes", Cement Concrete Res., 37, 251-257. https://doi.org/10.1016/j.cemconres.2006.10.008.
  20. Sujatha, T., Kannapiran, K. and Nagan, S. (2012), "Strength assessment of heat cured geopolymer concrete slender column", Asian J. Civil Eng., 42, 635-646.
  21. Uma, K., Anuradha, R. and Venkatasubramani, R. (2012), "Experimental investigation and analytical modelling of reinforced geopolymer concrete beam", Int. J. Civil Struct. Eng., 2, 817-827. https://doi.org/10.6088/ijcser.00202030010.
  22. Wang, G.L., Dai, J.G. and Teng, J.G. (2012), "Shear strength model for RC beam-column joints under seismic loading", Eng. Struct., 40, 350-360. https://doi.org/10.1016/j.engstruct.2012.02.038.

피인용 문헌

  1. Predictive modeling of the compressive strength of bacteria-incorporated geopolymer concrete using a gene expression programming approach vol.27, pp.4, 2020, https://doi.org/10.12989/cac.2021.27.4.319