Wind and Structures

  • 제30권2호
  • /
  • Pages.199-210
  • /
  • 2020
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Natural wind impact analysis of transiting test method to measure wind pressure coefficients

  • Liu, Lulu (School of Civil Engineering, Zhengzhou University) ;
  • Li, Shengli (School of Civil Engineering, Zhengzhou University) ;
  • Guo, Pan (School of Civil Engineering, Zhengzhou University) ;
  • Wang, Xidong (School of Civil Engineering, Zhengzhou University)
  • 투고 : 2018.03.14
  • 심사 : 2019.09.15
  • 발행 : 2020.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Building wind pressure coefficient transiting test is a new method to test the building wind pressure coefficient by using the wind generated by a moving vehicle, which is susceptible to natural wind and other factors. In this paper, the Commonwealth Advisory Aeronautical Research Council standard model with a scale ratio of 1:300 is used as the test object, and the wind pressure coefficient transiting test is repeated under different natural wind conditions to study the influence of natural wind. Natural wind is measured by an ultrasonic anemometer at a fixed location. All building wind pressure coefficient transiting tests meet the test conditions, and the vehicle's driving speed is 72 km/h. The mean wind pressure coefficient, the fluctuating wind pressure coefficient, and the correlation coefficient of wind pressure are used to describe the influence of natural wind on the building wind pressure coefficient transiting test qualitatively and quantitatively. Some rules, which can also help subsequent transiting tests, are also summarized.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Natural Science Foundation of Henan Province of China, Zhengzhou University

참고문헌

  1. Alminhana, G.W., Braun A.L. and Loredo-Souza, A.M. (2018) "A numerical-experimental investigation on the aerodynamic performance of CAARC building models with geometric modifications", J. Wind Eng. Ind. Aerod., 180, 34-48. https://doi.org/10.1016/j.jweia.2018.07.001.
  2. Altinisik, A. (2017), "Aerodynamic coast down analysis of a passenger car for various configurations", Int. J. Automot Techn, 18(2), 245-254. https://doi.org/10.1007/s12239-017-0024-6.
  3. Argentini T., Diana G., Rocchi D. and Somaschini C. (2016), "A case-study of double multi-modal bridge flutter: Experimental result and numerical analysis", J. Wind Eng. Ind. Aerod., 151, 25-36. https://doi.org/10.1016/j.jweia.2016.01.004.
  4. Baker, C.J. (2010), "The simulation of unsteady aerodynamic cross wind forces on trains", J. Wind Eng. Ind. Aerod., 98(2), 88-99. https://doi.org/10.1016/j.jweia.2009.09.006.
  5. Bhattacharyya, B. and Dalui, S.K. (2018), "Investigation of mean wind pressures on 'E' plan shaped tall building", Wind Struct., 26(2), 99-114. https://doi.org/10.12989/was.2018.26.2.099.
  6. Bo, L., Yang, Q. and Yang, J. (2016), "Wind characteristics near ground in south-eastern coast area of China based on field measurement", Geomat Nat Haz Risk., 7, 1-13. https://doi.org/10.1080/19475705.2016.1181459.
  7. Cheng, C.M. and Lu, P.C. (1992), "Wind loads on square Cylinder in homogeneous turbulent flows", J. Wind Eng. Ind. Aerod., 41(1-3), 739-749. https://doi.org/10.1016/0167-6105(92)90490-2.
  8. Chevula, S., Sanz-Andres, A. and Franchini, S. (2015), "Estimation of the correction term of pitot tube measurements in unsteady (gusty) flows", Flow Meas. Instrum., 46, 179-188. https://doi.org/10.1016/j.flowmeasinst.2015.08.011.
  9. Dalgliesh, W.A. (1975), "Comparison of model/full-scale wind pressures on a high-rise building", J. Wind Eng. Ind. Aerod., 1, 55-66. https://doi.org/10.1016/0167-6105(75)90006-9.
  10. Daniels, S.J., Castro, I.P. and Xie, Z.T. (2013), "Peak loading and surface pressure fluctuations of a tall model building", J. Wind Eng. Ind. Aerod., 120, 19-28. https://doi.org/10.1016/j.jweia.2013.06.014.
  11. Feng, R., Liu, F., Cai, Q., Yan, G. and Leng, J. (2018), "Field measurements of wind pressure on an open roof during typhoons field measurements of wind pressure on an open roof during typhoons HaiKui and SuLi", Wind Struct., 26(1), 11-24. https://doi.org/10.12989/was.2018.26.1.011.
  12. Fiedler, M., Berg, W., Ammon, C., Loebsin, C., Sanftleben, P., Samer, M., Bobrutzki, K.V., Kiwan, A. and Saha, C.K. (2013), "Air velocity measurements using ultrasonic anemometers in the animal zone of a naturally ventilated dairy barn", Biosyst. Eng., 116(3), 276-285. https://doi.org/10.1016/j.biosystemseng.2012.10.006.
  13. Guo, P., Wang, D.W. and Li, S.L. (2019), "Transiting test method for galloping of iced conductor using wind generated by a moving vehicle", Wind Struct., 28(3), 155-170. https://doi.org/10.12989/was.2019.28.3.155.
  14. He, X., Li, H., Wang, H., Fang, D. and Liu, M. (2017), "Effects of geometrical parameters on the aerodynamic characteristics of a streamlined flat box girder", J. Wind Eng. Ind. Aerod., 170, 56-67. https://doi.org/10.1016/j.jweia.2017.08.009.
  15. Huang, J. and Gu, M. (2014). "Tests for blockage effects of fluctuating wind pressure on a rectangular tall buildings in uniform flow", J. Vib. Shock, 33, 28-34. https://doi.org/10.13465/j.cnki.jvs.2014.12.005
  16. Kim, Y.C., Lo, Y.L. and Chang, C.H. (2018), "Characteristics of unsteady pressures on slender tall building", J. Wind Eng. Ind. Aerod., 174, 344-357. https://doi.org/10.1016/j.jweia.2018.01.027.
  17. Lee B.E. (1975), "The effect of turbulence on the surface pressure field of a square prism", J. Fluid Mech., 69(2), 263-282. https://doi.org/10.1017/S0022112075001437.
  18. Li, S., Liang, J., Zheng, S., Jiang, N., Liu, L. and Guo, P. (2019), "A Novel Test Method for Aerodynamic Coefficient Measurements of Structures Using Wind Generated by a Moving Vehicle", Exp Techniques.
  19. Li, S., Wan, R., Wang, D. and Guo, P. (2019), "Effect of end plates on transiting test for measuring the aerodynamic coefficient of structures using wind generated by a moving vehicle", J. Wind Eng. Ind. Aerod., 190, 273-286. https://doi.org/10.1016/j.jweia.2019.05.009
  20. Li, S.L., Liu, L.L., Wu, H., Jiang, N., Zheng, S.Y. and Guo, P. (2019), "New Test Method of Wind Pressure Coefficient Based on CAARC Standard Model Determined Using Vehicle Driving Wind", Exp Techniques. 43(6), 707-717. https://doi.org/10.1007/s40799-019-00330-2.
  21. Liang, J., Tan, H., Kato, S., Zhen, B. and Takahashi, T. (2011), "Wind tunnel investigation on influence of fluctuating wind direction on cross natural ventilation", Build. Environ., 46(12), 2490-2499. https://doi.org/10.1016/j.buildenv.2011.06.006.
  22. Liu, H., Qu, W. and Li, Q. (2011), "Comparison between wind load by wind tunnel test and in-site measurement of long-span spatial structure", Wind Struct., 14(4), 301-319. https://doi.org/10.12989/was.2011.14.4.301.
  23. Liu, X., Niu, J. and Kwok, K. (2013), "Evaluation of RANS turbulence models for simulating wind-induced mean pressures and dispersions around a complex-shaped high-rise building", Build. Simul., 6(2), 151-164. https://doi.org/10.1007/s12273-012-0097-0.
  24. Lj.Linic, S., Suzana J.Ocokoljic, G., S.Ristic, S., J.Lucanin, V., S.Kozic, M., P.Rasuo, B. and V.Jegdic, B. (2018), "Boundary-layer transition detection by thermography and numerical method around bionic train model in wind tunnel test", Therm. Sci., 22(2), 1137-1148. http://dx.doi.org/10.2298/TSCI170619302L.
  25. Marta, Z., Gori, G. and Guardone, A. (2016), "Blockage and three-dimensional effects in wind-tunnel testing of ice accretion over wings", J. Aircraft., 54(2), 1-9. https://doi.org/10.2514/1.C033750.
  26. McAuliffe B.R., Belluz, L. and Belzile, M. (2014), "Measurement of the on-road turbulence environment experienced by heavy duty vehicles", SAE Int. J. Commercial Vehicles, 7, 685-702. https://doi.org/10.4271/2014-01-2451.
  27. McAuliffe, B.R. and Chuang, D. (2016), "Track-Based Aerodynamic Testing of a Heavy-Duty Vehicle: Coast-Down Measurements", SAE Int. J. Commercial Vehicles., 9(2), 381-396. https://doi.org/10.4271/2016-01-8152.
  28. Melbourne, W. H. (1980), "Comparison of measurements on the CAARC standard tall building model in simulated model wind flows", J. Wind Eng. Ind. Aerod., 6(1-2), 73-88. https://doi.org/10.1016/0167-6105(80)90023-9.
  29. Meng, F.Q., He, B.J., Zhu, J., Zhao, D.X., Darko, A. and Zhao, Z.Q. (2018), "Sensitivity analysis of wind pressure coefficients on CAARC standard tall buildings in CFD simulations", J. Build. Eng., 16, 146-158. https://doi.org/10.1016/j.jobe.2018.01.004.
  30. Montazeri, H. and Blocken, B. (2013), "CFD simulation of wind-induced pressure coefficients on buildings with and without balconies: Validation and sensitivity analysis", Build. Environ., 60, 137-149. https://doi.org/10.1016/j.buildenv.2012.11.012.
  31. Ocokoljic, G., B. Rasuo, B. and Kozic, M. (2017), "Supporting system interference on aerodynamic characteristics of an aircraft model in a low-speed wind tunnel", Aerosp. Sci. Tech., 64, 133-146. https://doi.org/10.1016/j.ast.2017.01.021.
  32. Ocokoljic, G., Damljanovic, D., Vukovic, Đ. and Rasuo, B. (2018), "Contemporary frame of measurement and assessment of wind-tunnel flow quality in a low-speed facility", FME Transactions., 46(4), 429-442. https://doi.org/10.5937/fmet1804429O.
  33. Pascoa, J.C., Brojo, F.P., Santos, F.C. and Fael, P.O. (2012), "An innovative experimental on-road testing method and its demonstration on a prototype vehicle", J. Mech. Sci. Technol., 26(6), 1663-1670. https://doi.org/10.1007/s12206-012-0413-8.
  34. Rasuo, B. (2001), "On sidewall boundary layer effects in two-dimensional subsonic and transonic wind tunnels", Zeitschrift fur Angewandte Mathematik und Mechanik., 81, 935-936.
  35. Rasuo, B. (2006), "On boundary layer control in two-dimensional transonic wind tunnel testing", IUTAM Symposium on One Hundred Years of Boundary Layer Research., 129, 473-482. https://doi.org/10.1007/978-1-4020-4150-1_46.
  36. Rasuo, B. (2006), "On Status of Wind Tunnel Wall Correction", Proceedings of the 25th ICAS Congress, Hamburg, Germany, September.
  37. Rasuo, B. (2011), "The influence of Reynolds and Mach numbers on two-dimensional wind-tunnel testing: An experience", The Aeronaut J., 115(1166), 249-254. https://doi.org/10.1017/S0001924000005704.
  38. Rasuo, B. (2012), "Scaling between Wind Tunnels-Results Accuracy in Two-Dimensional Testing", T. Jpn. Soc. Aeronaut. S., 55(2), 109-115. https://doi.org/10.2322/tjsass.55.109.
  39. Rizzo, F. and Ricciardelli, F. (2017), "Design pressure coefficients for circular and elliptical plan structures with hyperbolic paraboloid roof", Eng Struct., 139, 153-169. https://doi.org/10.1016/j.engstruct.2017.02.035.
  40. Van Overbeke, P., De Vogeleer, G., Brusselman, E., Pieters, J.G. and Demeyer, P. (2015), "Development of a reference method for airflow rate measurements through rectangular vents towards application in naturally ventilated animal houses: part 3: application in a test facility in the open", Comput. Electron. Agr., 115, 97-107. https://doi.org/10.1016/j.compag.2015.05.009.
  41. Wang, B., Li, Y., Yu, H. and Liao, H. (2017), "Dynamic reliability evaluation of road vehicle subjected to turbulent crosswinds based on monte carlo simulation", Shock Vib., 2017, 1-12. https://doi.org/10.1155/2017/2365812.
  42. Wang, H., Mao, J. X. and Spencer Jr, B. F. (2019), "A monitoring-based approach for evaluating dynamic responses of riding vehicle on long-span bridge under strong winds", Eng. Struct., 189, 35-47. https://doi.org/10.1016/j.engstruct.2019.03.075.
  43. Wang, Y. and Li, Q.S. (2015), "Wind pressure characteristics of a low-rise building with various openings on a roof corner", Wind Struct., 21(1), 1-23. http://dx.doi.org/10.12989/was.2015.21.1.001.
  44. Wordley, S. and Saunders, J. (2008), "On-road turbulence", SAE Int. J. Passeng. Cars - Mech. Syst. 1(1), 341-360. https://doi.org/10.4271/2008-01-0475.
  45. Wu H. (2018), "Transiting test method to measure wind pressure coefficients of CAARC standard model using wind generated by a moving vehicle", Master Dissertation, Zhengzhou university, Zhengzhou, China.
  46. Yan, B.W. and Li, Q.S. (2015), "Inflow turbulence generation methods with large eddy simulation for wind effects on tall buildings", Comput. Fluids, 116, 158-175. https://doi.org/10.1016/j.compfluid.2015.04.020.
  47. Yi, J. and Li, Q.S. (2015), "Wind tunnel and full-scale study of wind effects on a super-tall building", J. Fluids Struct., 58, 236-253. https://doi.org/10.10r16/j.jfluidstructs.2015.08.005. https://doi.org/10.1016/j.jfluidstructs.2015.08.005
  48. Yu, M., Liu, J., Liu, D., Chen, H. and Zhang, J. (2016), "Investigation of aerodynamic effects on the high-speed train exposed to longitudinal and lateral wind velocities." J. Fluids Struct., 61, 347-361. https://doi.org/10.1016/j.jfluidstructs.2015.12.005.
  49. Yu, X.F., Xie, Z.N., Zhu, J.B. and Gu, M. (2015), "Interference effects on wind pressure distribution between two high-rise buildings", J. Wind Eng. Ind. Aerod., 142, 188-197. https://doi.org/10.1016/j.jweia.2015.04.008.
  50. Yuan, C.S. (2011), "The effect of building shape modification on wind pressure differences for cross-ventilation of a low-rise building", Int. J. Ventilation, 6(2), 167-176. https://doi.org/10.1080/14733315.2007.11683775.
  51. Yuan, W.B., Yu, N.T. and Wang, Z. (2018), "The effects of grooves on wind characteristics of tall cylinder buildings", Wind Struct., 26(2), 89-98. https://doi.org/10.12989/was.2018.26.2.089.
  52. Zhang, J. W. and Q. S. Li. (2018), "Field measurements of wind pressures on a 600m high skyscraper during a landfall typhoon and comparison with wind tunnel test." J. Wind Eng. Ind. Aerod., 175, 391-407. https://doi.org/10.1016/j.jweia.2018.02.012.
  53. Zhang, J. W. and Q. S. Li. (2018), "Field measurements of wind pressures on a 600m high skyscraper during a landfall typhoon and comparison with wind tunnel test", J. Wind Eng. Ind. Aerod., 175, 391-407. https://doi.org/10.1016/j.jweia.2018.02.012.
  54. Zhang, J. W. and Li, Q. S. (2018), "Field measurements of wind pressures on a 600 m high skyscraper during a landfall typhoon and comparison with wind tunnel test", J. Wind Eng. Ind. Aerod., 175, 391-407. https://doi.org/10.1016/j.jweia.2018.02.012.
  55. Zhang, X.l. and Liu P.F. (2017), "Virtual test system for coast-down resistance of motor vehicle with compensation of wind speed and direction", Transac. Chinese Soc. Agricul. Mach, 48, 390-397.
  56. Zou, Q., Li, Z., Wu, H., Kuang, R. and Hui, Y. (2015), "Wind pressure distribution on trough concentrator and fluctuating wind pressure characteristics", Sol Energy., 120, 464-478. https://doi.org/10.1016/j.solener.2015.02.014.