Wind and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Dynamic analysis of laminated nanocomposite pipes under the effect of turbulent in viscoelastic medium

  • Ghaitani, M.M. (Department of Mechanical Engineering, Sari Branch, Islamic Azad University) ;
  • Majidian, A. (Department of Mechanical Engineering, Sari Branch, Islamic Azad University) ;
  • Shokri, V. (Department of Mechanical Engineering, Sari Branch, Islamic Azad University)
  • Received : 2018.10.09
  • Accepted : 2019.09.30
  • Published : 2020.02.25
⟨ Previous Next ⟩

Abstract

In this paper, critical fluid velocity and frequency of laminated pipe conveying fluid are presented. Each layer of the pipe is reinforced by functionally graded carbon nanotubes (FG-CNTs). The internal fluid is assumed turbulent and the induced forces are calculated by momentum equations. The pipe is resting on viscoelastic foundation with spring, shear and damping constants. The motion equations are derived based on classical shell theory and energy method. Differential quadrature method (DQM) is used for solution and obtaining the critical fluid velocity. The effects of volume percent and distribution of CNT, boundary condition, lamina layer number, length to radius ration of pipe, viscoelastic medium and fluid velocity are shown on the critical fluid velocity. Results show that with increasing the lamina layer number, the critical fluid velocity increases.

Keywords

References

  1. Amabili, M. (2008), "Nonlinear vibrations and stability of shells and plates", New York, Cambridge University Press. New York. U.S.A.
  2. Dai, H.L., Wang, L. and Ni, Q. (2013), "Dynamics of a fluidconveying pipe composed of two different materials", Int. J. Eng. Sci., 73, 67-76. https://doi.org/10.1016/j.ijengsci.2013.08.008.
  3. Deng, J., Liu, Y., Zhang, Z. and Liu, W. (2017), "Stability analysis of multi-span viscoelastic functionally graded material pipes conveying fluid using a hybrid method", Europ. J. Mech. A/Solids, 65, 257-270. https://doi.org/10.1016/j.euromechsol.2017.04.003.
  4. Ghaitani, M.M. and Majidian, A. (2017), "Frequency and critical fluid velocity analysis of pipes reinforced with FG-CNTs conveying internal flows", Wind Struct., 24(3), 267-285. https://doi.org/10.12989/Was.2017.24.3.267.
  5. He, T. (2015), "Partitioned coupling strategies for fluid-structure interaction with large displacement: Explicit, implicit and semiimplicit schemes", Wind Struct., 20(3), 423-448. https://doi.org/10.12989/was.2015.20.3.423.
  6. Kutin, J. and Bajsic, I. (2014), "Fluid-dynamic loading of pipes conveying fluid with a laminar mean-flow velocity profile", J. Fluids Struct., 50, 171-183. https://doi.org/10.1016/j.jfluidstructs.2014.05.014.
  7. Maalawi, K.Y., Abouel-Fotouh, A.M., Bayoumi, M.El and Yehia, Kh.A.A. (2016), "Design of composite pipes conveying fluid for improved stability characteristics", Int. J. Appl. Eng. Res.,11(12), 7633-7639.
  8. Madani, H., Hosseini, H. and Shokravi, M. (2017), "Differential cubature method for vibration analysis of embedded FG-CNT-reinforced piezoelectric cylindrical shells subjected to uniform and non-uniform temperature distributions", Steel Compos. Struct., 22(4), 889-913. https://doi.org/10.12989/scs.2016.22.4.889.
  9. Marzani, A., Mazzotti, M., Viola, E., Vittori, P. and Elishakoff, I. (2012), "FEM Formulation for dynamic instability of fluid-conveying pipe on nonuniform elastic foundation", Mech. Based Des. Struct. Mach., 40(1), 83-95. https://doi.org/10.1080/15397734.2011.618443.
  10. Motezaker, M. and Kolahchi, R. (2017), "Seismic response of SiO2 nanoparticles-reinforced concrete pipes based on DQ and newmark methods", Comput. Concrete, 19(6), 745-753. https://doi.org/10.12989/cac.2017.19.6.745.
  11. Ni, Q., Luo, Y., Li, M. and Yan, H. (2017), "Natural frequency and stability analysis of a pipe conveying fluid with axially moving supports immersed in fluid", J. Sound Vib., 403, 173-189. https://doi.org/10.1016/j.jsv.2017.05.023.
  12. Ni, Q., Zhang, Z.L. and Wang, L. (2011), "Application of the differential transformation method to vibration analysis of pipes conveying fluid", Appl. Math. Comput., 217(16), 7028-7038. https://doi.org/10.1016/j.amc.2011.01.116.
  13. Qian, Q., Wang, L. and Ni, Q. (2009), "Instability of simply supported pipes conveying fluid under thermal loads", Mech. Res. Commun., 36(3), 413-417. https://doi.org/10.1016/j.mechrescom.2008.09.011.
  14. Qu, Y., Hua, H. and Meng, G. (2013) "A domain decomposition approach for vibration analysis of isotropic and composite cylindrical shells with arbitrary boundaries", Compos. Struct., 95, 307-321. https://doi.org/10.1016/j.compstruct.2012.06.022.
  15. Reddy, J.N. (2004), "Mechanics of laminated composite plates and shells", CRC press, Washington. U.S.A.
  16. Rivero-Rodriguez, J. and Perez-Saborid, M. (2015), "Numerical investigation of the influence of gravity on flutter of cantilevered pipes conveying fluid", J. Fluids Struct., 55, 106-121. https://doi.org/10.1016/j.jfluidstructs.2015.02.009.
  17. Ryu, B.J., Ryu, S.U., Kim, G.H. and Yim, K.B. (2004), "Vibration and dynamic stability of pipes conveying fluid on elastic foundations", KSME Int. J., 18(12), 2148-2157. https://doi.org/10.1007/BF02990219.
  18. Sun, F.J. and Gu, M. (2014), "A numerical solution to fluid-structure interaction of membrane structures under wind action", Wind Struct., 19(1), 35-58. https://doi.org/10.12989/was.2014.19.1.035.
  19. Tang, D., Wu, G., Yao, X., and Wang, Ch. (2016), "Free vibration analysis of circular cylindrical shells with arbitrary boundary conditions by the method of reverberation-ray matrix", Shock Vib., 3814693, https://doi.org/10.1155/2016/3814693.
  20. Texier, B.D. and Dorbolo, S. (2015), "Deformations of an elastic pipe submitted to gravity and internal fluid flow", J. Fluids Struct., 55, 364-371. https://doi.org/10.1016/j.jfluidstructs.2015.03.010.
  21. Wang, L. (2012), "Flutter instability of supported pipes conveying fluid subjected to distributed follower forces", Acta Mech. Solida. Sin., 25(1), 46-52. https://doi.org/10.1016/S0894-9166(12)60005-6.