DOI QR코드

DOI QR Code

A comprehensive FE model for slender HSC columns under biaxial eccentric loads

  • Lou, Tiejiong (Hubei Key Laboratory of Roadway Bridge & Structure Engineering, Wuhan University of Technology) ;
  • Lopes, Sergio M.R. (Department of Civil Engineering, University of Coimbra) ;
  • Lopes, Adelino V. (Department of Civil Engineering, University of Coimbra) ;
  • Sun, Wei (Faculty of Engineering and Physical Sciences, University of Southampton)
  • 투고 : 2019.04.03
  • 심사 : 2019.08.27
  • 발행 : 2020.01.10

초록

A finite element (FE) model for analyzing slender reinforced high-strength concrete (HSC) columns under biaxial eccentric loading is formulated in terms of the Euler-Bernoulli theory. The cross section of columns is divided into discrete concrete and reinforcing steel fibers so as to account for varied material properties over the section. The interaction between axial and bending fields is introduced in the FE formulation so as to take the large-displacement or P-delta effects into consideration. The proposed model aims to be simple, user-friendly, and capable of simulating the full-range inelastic behavior of reinforced HSC slender columns. The nonlinear model is calibrated against the experimental data for slender column specimens available in the technical literature. By using the proposed model, a numerical study is carried out on pin-ended slender HSC square columns under axial compression and biaxial bending, with investigation variables including the load eccentricity and eccentricity angle. The calibrated model is expected to provide a valuable tool for more efficiently designing HSC columns.

키워드

과제정보

연구 과제 주관 기관 : Central Universities

참고문헌

  1. Bai, Z.Z. and Au, F.T.K. (2013), "Flexural ductility design of highstrength concrete columns", Struct. Design Tall Special Build., 22, 92-115. https://doi.org/10.1002/tal.662.
  2. Bouchaboub, M. and Samai, M.L. (2013), "Nonlinear analysis of slender high-strength R/C columns under combined biaxial bending and axial compression", Eng. Struct., 48, 37-42. https://doi.org/10.1016/j.engstruct.2012.08.030.
  3. Bouzid, H and Kassoul, A. (2016), "Curvature ductility of high strength concrete beams according to Eurocode 2", Struct. Eng. Mech., 58(1), 1-19. https://doi.org/10.12989/sem.2016.58.1.001.
  4. Bouzid, H. and Kassoul, A. (2018), "Curvature ductility prediction of high strength concrete beams", Struct. Eng. Mech., 66(2), 195-201. https://doi.org/10.12989/sem.2018.66.2.195.
  5. Campione, G., Fossetti, M., Minafo, G. and Papia, M. (2012), "Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns", Eng. Struct., 34, 371-382. https://doi.org/10.1016/j.engstruct.2011.10.002.
  6. CEN (2004), Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings, EN 1992-1-1, European Committee for Standardization, Brussels, Belgium.
  7. Claeson, C. and Gylltoft, K. (1998), "Slender high-strength concrete columns subjected to eccentric loading", ASCE J. Struct. Eng., 124(3), 233-240. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:3(233).
  8. Diniz, S.M.C. and Frangopol, D.M. (1997), "Strength and ductility simulation of high-strength concrete columns", ASCE J. Struct. Eng., 123(10), 1365-1374. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1365).
  9. Diniz, S.M.C. and Frangopol, D.M. (1998), "Reliability assessment of high-strength concrete columns", ASCE J. Eng. Mech., 124(5), 529-536. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:5(529).
  10. Diniz, S.M.C. and Frangopol, D.M. (2003), "Safety evaluation of slender high-strength concrete columns under sustained loads", Comput. Struct., 81(14), 1475-1486. https://doi.org/10.1016/S0045-7949(03)00085-3.
  11. Ho, J.C.M., Lam, J.Y.K. and Kwan, A.K.H. (2010), "Effectiveness of adding confinement for ductility improvement of high-strength concrete columns", Eng. Struct., 32, 714-725. https://doi.org/10.1016/j.engstruct.2009.11.017.
  12. Hung, C.C. and Hu, F.Y. (2018), "Behavior of high-strength concrete slender columns strengthened with steel fibers under concentric axial loading", Construct. Build. Mater., 175, 422-433. https://doi.org/10.1016/j.conbuildmat.2018.04.201.
  13. Jumaa, G.B. and Yousif, A.R. (2019), "Size effect in shear failure of high strength concrete beams without stirrup reinforced with basalt FRP bars", KSCE J. Civil Eng., 23(4), 1636-1650. https://doi.org/10.1007/s12205-019-0121-3
  14. Kim, J.K. and Yang, J.K. (1995), "Buckling behaviour of slender high-strength concrete columns", Eng. Struct., 17(1), 39-51. https://doi.org/10.1016/0141-0296(95)91039-4.
  15. Lee, H.J. (2013), "Predictions of curvature ductility factor of doubly reinforced concrete beams with high strength materials", Comput. Concrete, 12(6), 831-850. https://doi.org/10.12989/cac.2013.12.6.831.
  16. Lou, T., Liu, M., Lopes, S.M.R. and Lopes, A.V. (2017), "Moment redistribution in two-span prestressed NSC and HSC beams", Mater. Struct., 50, 246. https://doi.org/10.1617/s11527-017-1116-5.
  17. Lou, T., Lopes, S.M.R. and Lopes, A.V. (2014), "FE modeling of inelastic behavior of reinforced high-strength concrete continuous beams", Struct. Eng. Mech., 49(3), 373-393. http://dx.doi.org/10.12989/sem.2014.49.3.373.
  18. Lou, T., Lopes, S.M.R. and Lopes, A.V. (2015a), "FE analysis of short- and long-term behavior of simply supported slender prestressed concrete columns under eccentric end axial loads causing uniaxial bending", Eng. Struct., 85, 52-62. https://doi.org/10.1016/j.engstruct.2014.12.023.
  19. Lou, T., Lopes, S.M.R. and Lopes, A.V. (2015b), "Redistribution of moments in reinforced high-strength concrete beams with and without confinement", Struct. Eng. Mech., 55(2), 379-398. http://dx.doi.org/10.12989/sem.2015.55.2.379.
  20. Lou, T., Lopes, S.M.R. and Lopes, A.V. (2015c), "Neutral axis depth and moment redistribution in FRP and steel reinforced concrete continuous beams", Compos. Part B Eng., 70, 44-52. https://doi.org/10.1016/j.compositesb.2014.10.044.
  21. Ma, C., Awang, A.Z. and Omar, W. (2016), "Flexural ductility design of confined high-strength concrete columns: Theoretical modeling", Measurement, 78, 42-48. https://doi.org/10.1016/j.measurement.2015.09.039.
  22. Pallares, L., Bonet, J.L., Miguel, P.F. and Fernandez-Prada, M.A. (2009), "The influence of the weak axis on the behavior of high strength RC slender columns subjected to biaxial bending", Eng. Struct., 31, 487-497. https://doi.org/10.1016/j.engstruct.2008.10.001.
  23. Pallares, L., Bonet, J.L., Miguel, P.F. and Fernandez-Prada, M.A. (2008), "Experimental research on high strength concrete slender columns subjected to compression and biaxial bending forces", Eng. Struct., 30, 1879-1894. https://doi.org/10.1016/j.engstruct.2007.12.005.
  24. Saatcioglu, M. and Razvi, S.R. (1998), "High-strength concrete columns with square sections under concentric compression", ASCE J. Struct. Eng., 124(12), 1438-1447. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1438).
  25. Teixeira, M.M. and Bernardo, L.F.A. (2018), "Ductility of RC beams under torsion", Eng. Struct., 168, 759-769. https://doi.org/10.1016/j.engstruct.2018.05.021.
  26. Teng, J.G., Xiao, Q.G., Yu, T. and Lam, L. (2015), "Three-dimensional finite element analysis of reinforced concrete columns with FRP and/or steel confinement", Eng. Struct., 97, 15-28. https://doi.org/10.1016/j.engstruct.2015.03.030.