DOI QR코드

DOI QR Code

A stress-function variational approach toward CFRP -concrete interfacial stresses in bonded joints

  • Samadvand, Hojjat (Department of Civil Engineering, Babol Noshirvani University of Technology) ;
  • Dehestani, Mehdi (Department of Civil Engineering, Babol Noshirvani University of Technology)
  • Received : 2018.07.21
  • Accepted : 2019.10.15
  • Published : 2020.01.25

Abstract

This paper presents an innovative stress-function variational approach in formulating the interfacial shear and normal stresses in an externally bonded concrete joint using carbon fiber-reinforced plastic (CFRP) plies. The joint is subjected to surface traction loadings applied at both ends of the concrete substrate layer. By introducing two interfacial shear and normal stress functions on the CFRP-concrete interface, based on Euler-Bernoulli beam idea and static stress equations of equilibrium, the entire stress fields of the joint were determined. The complementary strain energy was minimized in order to solve the governing equation of the joint. This yields an ordinary differential equation from which the interfacial normal and shear stresses were proposed explicitly, satisfying all the multiple traction boundary conditions. Lamination theory for composite materials was also employed to obtain the interfacial stresses. The proposed approach was validated by the analytic models in the literature as well as through a comprehensive computational code generated by the authors. Furthermore, a numerical verification was carried out via the finite element software ABAQUS. In the end, a scaling analysis was conducted to analyze the interfacial stress field dependence of the joint upon effective issues using the devised code.

Keywords

References

  1. Ali, M.M., Oehlers, D.J. and Bradford, M.A. (2001), "Shear peeling of steel plates bonded to tension faces of RC beams", J. Struct. Eng., 127(12), 1453-1459. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:12(1453).
  2. Ali, M.M., Oehlers, D.J. and Bradford, M.A. (2002), "Interaction between flexure and shear on the debonding of RC beams retrofitted with compression face plates", Adv. Struct. Eng., 5(4), 223-230. https://doi.org/10.1260/136943302320974590.
  3. American Concrete Institute (ACI) (2008), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structure, ACI 440.2R-08, Farmington Hills, MI, USA.
  4. Beer, F., Johnston, E.R., Dewolf, J.T. and Mazurek, D.F. (2009), Mechanics of Materials, 5th Edition, McGraw Hill, New York, NY, USA.
  5. CNR-DT 200 (2004), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening.
  6. Concrete Society (2004), Design Guidance for Strengthening Concrete Structures with Fiber Composite Materials, Concrete Society Technical Rep. No. 55, 2nd Ed., Surrey, U.K.
  7. Dogan, A.B. and Anil, O. (2010), "Nonlinear finite element analysis of effective CFRP bonding length and strain distribution along concrete-CFRP interface", Comput. Concrete, 7(5), 437-453. https://doi.org/10.12989/cac.2010.7.5.437.
  8. Hashemi, S.H., Maghsoudi, A.A. and Rahgozar, R. (2008), "Flexural ductility of reinforced HSC beams strengthened with CFRP sheets", Struct. Eng. Mech., 30(4), 403-426. http://dx.doi.org/10.12989/sem.2008.30.4.403.
  9. Herakovich, C.T. (1998), Mechanics of Fibrous Composites, John Wiley & Sons, Inc.
  10. Hosseini, A. and Mostofinejad, D. (2013), "Experimental investigation into bond behavior of CFRP sheets attached to concrete using EBR and EBROG techniques", Compos. Part B: Eng., 51, 130-139. https://doi.org/10.1016/j.compositesb.2013.03.003.
  11. International Federation for Structural Concrete (fib) (2001), "Externally bonded FRP reinforcement for RC structures", Technical Report, Task Group 9.3, Bulletin No. 14, Lausanne, Switzerland.
  12. Japan Society of Civil Engineers (JSCE) (2001), "Recommendations for upgrading of concrete structures with use of continuous fiber sheets", Concrete Engineering Series, 41, English Version, Tokyo.
  13. Karbhari, V.M. and Abanilla, M.A. (2007), "Design factors, reliability, and durability prediction of wet layup carbon/epoxy used in external strengthening", Compos. Part B: Eng., 38(1), 10-23. https://doi.org/10.1016/j.compositesb.2006.06.001.
  14. Kassapoglou, C. (1990), "Determination of interlaminar stresses in composite laminates under combined loads", J. Reinf. Plast. Compos., 9(1), 33-58. https://doi.org/10.1177/073168449000900103.
  15. Kassapoglou, C. and Lagace, P.A. (1986), "An efficient method for the calculation of interlaminar stresses in composite materials", J. Appl. Mech., 53(4), 744-750. https://doi.org/10.1115/1.3171853
  16. Kassapoglou, C. and Lagace, P.A. (1987), "Closed form solutions for the interlaminar stress field in angle-ply and cross-ply laminates", J. Compos. Mater., 21(4), 292-308. https://doi.org/10.1177/002199838702100401.
  17. Kaw, A.K. (2006), Mechanics of Composite Materials, Second Edition, Taylor & Francis Group, LLC.
  18. Khan, U., Al-Osta, M.A. and Ibrahim, A. (2017), "Modeling shear behavior of reinforced concrete beams strengthened with externally bonded CFRP sheets", Struct. Eng. Mech., 61(1), 125-142. https://doi.org/10.12989/sem.2017.61.1.125.
  19. Lin, H.X., Lu, J.Y. and Xu, B. (2017), "Numerical approach to fracture behavior of CFRP/concrete bonded interfaces", Comput. Concrete, 20(3), 291-295. https://doi.org/10.12989/cac.2017.20.3.291.
  20. MATLAB Documentation (2011), General Release Notes, Release 2011a, Version 7.12.0.635.
  21. Oehlers, D.J. and Moran, J.P. (1990), "Premature failure of externally plated reinforced concrete beams", J. Struct. Eng., 116(4), 978-995. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:4(978).
  22. Oehlers, D.J., Park, S.M. and Ali, M.M. (2003), "A structural engineering approach to adhesive bonding longitudinal plates to RC beams and slabs", Compos. Part A: Appl. Sci. Manuf., 34(9), 887-897. https://doi.org/10.1016/S1359-835X(03)00153-2.
  23. Pagano, N.J. (1978), "Free edge stress fields in composite laminates", Int. J. Solid. Struct., 14(5), 401-406. https://doi.org/10.1016/0020-7683(78)90021-5.
  24. Pagano, N.J. (1978), "Stress fields in composite laminates", Int. J. Solid. Struct., 14(5), 385-400. https://doi.org/10.1016/0020-7683(78)90020-3.
  25. Pattabhi, G., Santosh, S., Latha, I.B., Rao, M.V. and Kumar, C.A. (2012), "Analysis of adhesively bonded double lap joint in laminated FRP composites subjected to longitudinal loading", Int. J. Eng. Sci. Adv. Technol, 2(2), 307-316.
  26. Pipes, R.B. and Pagano, N.J. (1974), "Interlaminar stresses in composite laminates-an approximate elasticity solution", J. Appl. Mech., 41(3), 668-672. https://doi.org/10.1115/1.3423368.
  27. Puppo, A.H. and Evensen, H.A. (1970), "Interlaminar shear in laminated composites under generalized plane stress", J. Compos. Mater., 4(2), 204-220. https://doi.org/10.1177/002199837000400206.
  28. Smith, S.T. and Teng, J.G. (2002), "FRP-strengthened RC beams. I: review of debonding strength models", Eng. Struct., 24(4), 385-395. https://doi.org/10.1016/S0141-0296(01)00105-5.
  29. Smith, S.T. and Teng, J.G. (2002), "FRP-strengthened RC beams. II: assessment of debonding strength models", Eng. Struct., 24(4), 397-417. https://doi.org/10.1016/S0141-0296(01)00106-7.
  30. Smith, S.T. and Teng, J.G. (2003), "Shear-bending interaction in debonding failures of FRP-plated RC beams", Adv. Struct. Eng., 6(3), 183-199. https://doi.org/10.1260/136943303322419214.
  31. Tang, S. (1975), "A boundary layer theory-Part I: Laminated composites in plane stress", J. Compos. Mater., 9(1), 33-41. https://doi.org/10.1177/002199837500900104.
  32. Tang, S. and Levy, A. (1975), "A boundary layer theory-part II: extension of laminated finite strip", J. Compos. Mater., 9(1), 42-52. https://doi.org/10.1177/002199837500900105.
  33. Teng, J.G., Smith, S.T., Yao, J. and Chen, J.F. (2003), "Intermediate crack-induced debonding in RC beams and slabs", Constr. Build. Mater., 17(6-7), 447-462. https://doi.org/10.1016/S0950-0618(03)00043-6.
  34. Touati, M., Tounsi, A. and Benguediab, M. (2015), "Effect of shear deformation on adhesive stresses in plated concrete beams: Analytical solutions", Comput. Concrete, 15(3), 337-355. https://doi.org/10.12989/cac.2015.15.3.337.
  35. Wu, X.F. and Dzenis, Y.A. (2005), "Experimental determination of probabilistic edge-delamination strength of a graphite- fiber/epoxy composite", Compos. Struct., 70(1), 100-108. https://doi.org/10.1016/j.compstruct.2004.08.016.
  36. Wu, X.F. and Jenson, R.A. (2011), "Stress-function variational method for stress analysis of bonded joints under mechanical and thermal loads", Int. J. Eng. Sci., 49(3), 279-294. https://doi.org/10.1016/j.ijengsci.2010.11.005.
  37. Wu, X.F. and Jenson, R.A. (2014), "Semianalytic stress-function variational approach for the interfacial stresses in bonded joints", J. Eng. Mech., 140(11), 04014089. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000803.

Cited by

  1. Application of Kelvin's theory for structural assessment of FG rotating cylindrical shell: Vibration control vol.10, pp.6, 2020, https://doi.org/10.12989/acc.2020.10.6.499
  2. Confinement effectiveness of Timoshenko and Euler Bernoulli theories on buckling of microfilaments vol.11, pp.1, 2021, https://doi.org/10.12989/acc.2021.11.1.081
  3. Thermal stress effects on microtubules based on orthotropic model: Vibrational analysis vol.11, pp.3, 2020, https://doi.org/10.12989/acc.2021.11.3.255
  4. Mechanics of anisotropic cardiac muscles embedded in viscoelastic medium vol.12, pp.1, 2020, https://doi.org/10.12989/acc.2021.12.1.057
  5. An innovative system for novel vibration of rotating FG shell with combination of fraction laws vol.12, pp.2, 2020, https://doi.org/10.12989/acc.2021.12.2.157
  6. Numerical finite element study of strengthening of damaged reinforced concrete members with carbon and glass FRP wraps vol.28, pp.2, 2020, https://doi.org/10.12989/cac.2021.28.2.137
  7. Numerical finite element study of strengthening of damaged reinforced concrete members with carbon and glass FRP wraps vol.28, pp.2, 2020, https://doi.org/10.12989/cac.2021.28.2.137