DOI QR코드

DOI QR Code

A research on optimum designs of steel frames including soil effects or semi rigid supports using Jaya algorithm

  • Artar, Musa (Department of Civil Engineering, Bayburt University) ;
  • Daloglu, Ayse T. (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2019.04.26
  • 심사 : 2019.10.05
  • 발행 : 2020.01.25

초록

The effect of soil foundation plays active role in optimum design of steel space frames when included. However, its influence on design can be calculated after a long iterative procedure. So it requires longer computer time and more computational effort if it is done properly. The main purpose of this study is to investigate how these effects can be calculated in more practical way in a shorter time. The effects of semi-rigid column bases are taken into account in optimum design of steel space frames. This study is carried out by using JAYA algorithm which is a novel and practical method based on a single revision equation. The displacement, stress and geometric size constraints are considered in the optimum design. A computer program is coded in MATLAB to achieve corporation with SAP2000-OAPI (Open Application Programming Interface) for optimum solutions. Four different steel space frames including soil structure interaction taken from literature are investigated according to different semi-rigidly supported models depending on different rotational stiffness values. And the results obtained from analyses are compared with the results available in reference studies. The results of the study show that semi-rigidly supported systems in the range of appropriate rotational stiffness values offer practical solutions in a very short time. And close agreement is obtained with the studies on optimum design of steel space frames including soil effect underneath.

키워드

참고문헌

  1. AISC-LRFD (2001), Manual of Steel Construction-Load and Resistance Factor Design. American Institute of Steel Construction, Chicago, USA.
  2. ASCE 7-05 (2005), Minimum Design Loads for Building and Other Structures, New York, USA.
  3. Artar, M. and Daloglu, A.T. (2015), "Optimum design of steel space frames with composite beams using genetic algorithm", Steel Compos. Struct., 19(2), 503-519. https://doi.org/ 10.12989/ scs. 2015.19.2.503.
  4. Artar, M. (2016), "Optimum design of steel space frames under earthquake effect using harmony search", Struct. Eng. Mech., 58(3), 597-612. https://doi.org/10.12989/sem.2016.58.3.597.
  5. Artar, M. and Daloglu, A.T. (2019), "Optimum design of steel space truss towers under seismic effect using Jaya algorithm", Struct. Eng. Mech., 71(1),1-12. https://doi.org/10.12989/sem.2019.71.1.001.
  6. Aydogdu, I. and Saka, M.P. (2012), "Ant colony optimization of irregular steel frames including elemental warping effect", Adv. Eng. Softw., 44(1), 150-169. https://doi.org/10.1016/j.advengsoft.2011.05.029.
  7. Aydogdu, I. (2017), "Cost optimization of reinforced concrete cantilever retaining walls under seismic loading using a biogeography-based optimization algorithm with Levy flights", Eng. Optimiz. 49(3), 381-400. https://doi.org/10.1080/0305215X.2016.1191837.
  8. Aydogdu, I., Efe, P. Yetkin, M. and Akin., A. (2017), "Optimum design of steel space structures using social spider optimization algorithm with spider jump technique", Struct. Eng. Mech., 62(3), 259-272. https://doi.org/10.12989/sem.2017.62.3.259.
  9. Aydogdu, I, Carbas, S. and Akin., A. (2017), "Effect of Levy Flight on the discrete optimum design of steel skeletal structures using metaheuristics", Steel Compos. Struct., 24(1), 93-112. https://doi.org/10.12989/scs.2017.24.1.093.
  10. Aydogdu I. (2010), Optimum design of 3-d irregular steel frames using ant colony optimization and harmony search algorithms. Ph.D. Dissertation, Middle East Technical University, Ankara, Turkey.
  11. Carbas S. (2016), "Design optimization of steel frames using an enhanced firefly algorithm", Eng. Optimiz., 48(12), 2007-2025. https://doi.org/10.1080/0305215X.2016.1145217.
  12. Carbas, S. (2017), "Optimum structural design of spatial steel frames via biogeography-based optimization", Neural Comput. Appl., 28(6),1525-1539. https://doi.org/10.1007/s00521-015-2167-6.
  13. Daloglu, A.T, Artar, M., Ozgan, K. and Karakas A.I. (2016), "Optimum design of steel space frames including soil-structure interaction", Struct. Multidiscip. O., 54(1), 117-131. https://doi.org/10.1007/s00158-016-1401-x.
  14. Daloglu, A., Artar, M., Ozgan K. and Karakas, A.I. (2015), "Optimum design of space steel frames on elastic ground with GA" XIX. National Mechanical Congress, Karadeniz Technical University, Trabzon, Turkey, August.
  15. Dede, T. (2018), "Jaya algorithm to solve single objective size optimization problem for steel grillage structures", Steel Compos. Struct., 26(2), 163-170. https://doi.org/10.12989/scs.2018.25.2.163.
  16. Degertekin, S.O. (2007), "A comparison of simulated annealing and genetic algorithm for optimum design of nonlinear steel space frames", Struct. Multidiscip. O., 34(4), 347-359. https://doi.org/10.1007/s00158-007-0096-4.
  17. Degertekin, S.O., Saka, M.P. and Hayalioglu, M.S. (2008), "Optimal load and resistance factor design of geometrically nonlinear steel space frames via tabu search and genetic algorithm", Eng. Struct., 30(1), 197-205. https://doi.org/10.1016/j.engstruct.2007.03.014.
  18. Degertekin, S.O., Hayalioglu, M.S. and Ulker, M. (2008), "A hybrid-tabu simulated annealing heuristic algirthm for optimum design of steel frames", Steel Compos. Struct., 8(6), 475-490. https://doi.org/10.12989/scs.2008.8.6.475.
  19. Degertekin, S.O. and Hayalioglu, M.S. (2010), "Harmony search algorithm for minimum cost design of steel frames with semi-rigid connections and column bases", Struct. Multidiscip. O., 42(5), 755-768.https://doi.org/10.1007/s00158-010-0533-7.
  20. Degertekin, S.O., Lamberti L. and Ugur I.B. (2017), "Discrete and continuous design optimization of tower structures using the Jaya algorithm", ICADET'17, 2. International Conference on Advanced Engineering Technologies Bayburt, Turkey, September.
  21. Erbatur, F., Hasancebi, O., Tutuncu, I. and Kilic, H. (2000), "Optimal design of planar and space structures with genetic algorithms", Comput. Struct., 75(2), 209-224. https://doi.org/ 10.1016/S0045-7949(99)00084-X.
  22. Esen, Y. and Ulker, M. (2008), "Optimization of multi storey space steel frames, materially and geometrically properties non-linear", J. Fac. Eng. Arch. Gazi Univ., 23(2), 485-494.
  23. Grzywinski, M., Dede, T. and Ozdemir, Y.I. (2019), "Optimization of the braced dome structures by using Jaya algorithm with frequency constraints", Steel Compos. Struct., 30(1), 47-55. https://doi.org/10.12989/scs.2019.30.1.047.
  24. Hadidi, A. and Rafiee, A. (2014), "Harmony search based, improved Particle Swarm Optimizer for minimum cost design of semi-rigid steel frames", Struct. Eng. Mech., Int. J., 50(3), 323-347.https://doi.org/10.12989/sem.2014.50.3.323.
  25. Hasancebi, O., Carbas, S., Dogan, E., Erdal, F. and Saka, M.P. (2009) "Performance evaluation of metaheuristic search techniques in the optimum design of real size pin jointed structures", Comput. Struct., 87(5-6), 284-302. https://doi.org/10.1016/j.compstruc.2009.01.002.
  26. Hasancebi, O. and Carbas, S. (2014) "Bat inspired algorithm for discrete size optimization of steel frames", Adv. Eng. Softw., 67, 173-185.https://doi.org/10.1016/j.advengsoft.2013.10.003.
  27. Hayalioglu, M.S. and Degertekin, S.O. (2004), "Genetic algorithm based optimum design of non-linear steel frames with semi-rigid connections", Steel Compos. Struct., 4(6), 453-469. https://doi.org/10.12989/scs.2004.4.6.453
  28. Hayalioglu, M.S. and Degertekin, S.O. (2005), "Minimum cost design of steel frames with semi-rigid connections and column bases via genetic optimization", Comput. Struct., 83(21-22), 1849-1863.https://doi.org/10.1016/j.compstruc.2005.02.009.
  29. Kameshki, E.S. and Saka, M.P. (2001), "Genetic algorithm based optimum bracing design of non-swaying tall plane frames", J. Constr. Steel Res., 57(10), 1081-1097. https://doi.org/10.1016/S0143-974X(01)00017-7.
  30. Karakas, A.I., Artar, M. Ozgan, K. and Daloglu, A.T. (2016), Optimum design of space truss bridges including soil-structure interaction, ICENS, International Conference on Engineering and Natural Sciences, Sarajevo, May.
  31. Kaveh, A. and Talatahari, S. (2012), "A hybrid CSS and PSO algorithm for optimal design of structures", Struct. Eng. Mech., 42(6), 783-797.https://doi.org/10.12989/sem.2012.42.6.783.
  32. Kelesoglu, O., and Ulker, M. (2005), "Multi-objective fuzzy optimization of space trusses by Ms-Excel", Adv. Eng. Softw., 36(8), 549-553.https://doi.org/10.1016/j.advengsoft.2005.02.001.
  33. Lee, K.S. and Geem, Z.W. (2004), "A new structural optimization method based on the harmony search algorithm", Comput. Struct., 82, 781-798. https://doi.org/10.1016/j.compstruc.2004.01.002.
  34. MATLAB (2009), The Language of Technical Computing. The Mathworks, Natick, MA, U.S.A.
  35. Rafiee, A., Talatahari, S. and Hadidi, A. (2013), "Optimum design of steel frames with semi-rigid connections using Big Bang-Big Crunch method", Steel Compos. Struct., 14(5), 431-451. https://doi.org/10.12989/scs.2013.14.5.431.
  36. Rajeev, S. and Krishnamoorthy, C.S. (1992), "Discrete optimization of structures using genetic algorithms", J. Struct. Eng., ASCE, 118(5), 1233-1250. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1233)
  37. Rao, R.V., Savsani, V.J. and Vakharia, D.P. (2011), "Teaching-learning-based optimization: A novel method for constrained mechanical design optimization problems", Computer-Aided Design, 43(3), 303-315. https://doi.org/10.1016/j.cad.2010.12.015.
  38. Rao, R.V. and Patel, V. (2013), "An improved teaching-learning-based optimization algorithm for solving unconstrained optimization problems", Scientia Iranica, 20(3), 710-720. https://doi.org/10.1016/j.scient.2012.12.005.
  39. Rao, R.V. (2016), "Jaya: A simple and new optimization algorithm for solving constrained and unconstrained optimization problems", J. Industrial Eng. Comput., 7(1), 19-34. https://doi.org/10.5267/j.ijiec.2015.8.004.
  40. Rao, R.V., More, K.C., Taler, J. and Oclon., P. (2016), "Dimensional optimization of a micro-channel heat sink using Jaya algorithm", Appl. Therm. Eng., 103, 572-582. https://doi.org/10.1016/j.applthermaleng.2016.04.135.
  41. Rao, R.V., Rai, D.P. and Balic, J. (2016), "Surface grinding process optimization using Jaya Algorithm", Comput. Intelligence Data Mining, 2, 487-495. https://doi.org/10.1007/978-81-322-2731-1_46.
  42. Rao, R.V., and More, K.C. (2017), "Design optimization and analysis of selected thermal devices using self-adaptive Jaya algorithm", Energy Conversion Management, 140, 24-35. https://doi.org/10.1016/j.enconman.2017.02.068.
  43. Rao, R.V. (2020), "Rao algorithms: Three metaphor-less simple algorithms for solving optimization problems", J. Industrial Eng. Comput., 11(1), 107-130. https://doi.org/ 10.5267/j.ijiec.2019.6.002.
  44. Saka, M.P. and Geem, Z.W. (2013), "Mathematical and Metaheuristic applications in design optimization of steel frame structures: an extensive review", Math. Problems Eng., 2013, 1- 33. https://doi.org/10.1155/2013/271031.
  45. SAP2000. 2008. Integrated finite elements analysis and design of structures. Computers and Structures, Inc. Berkeley.
  46. Shallan, O., Maaly, H.M., Sagiroglu, M. and Hamdy, O. (2019), "Design optimization of semi-rigid space steel frames with semi-rigid bases using biogeography-based optimization and genetic algorithms", Struct. Eng. Mech., 70(2), 221-231. https://doi.org/10.12989/sem.2019.70.2.221.
  47. Shallan, O., Maaly, H.M. and Hamdy, O. (2018), "A developed design optimization model for semi-rigid steel frames using teaching-learning-based optimization and genetic algorithms", Struct. Eng. Mech., 66(2), 173-183. https://doi.org/10.12989/sem.2018.66.2.173.
  48. Togan, V. and Daloglu, A.T. (2006), "Optimization of 3d trusses with adaptive approach in genetic algorithms", Eng. Struct., 28(7), 1019-1027.https://doi.org/10.1016/j.engstruct.2005.11.007
  49. Togan, V. and Daloglu, A.T. (2008), "An improved genetic algorithm with initial population strategy and self-adaptive member grouping", Comput. Struct., 86(11-12): 1204-1218. https://doi.org/10.1016/j.compstruc.2007.11.006.
  50. Togan, V., Daloglu, A.T. and Karadeniz, H. (2011), "Optimization of trusses under uncertainties with harmony search", Struct. Eng. Mech., 37(5), 543-560. https://doi.org/10.12989/sem.2011.37.5.543.
  51. Togan, V. (2012), "Design of planar steel frames using teaching- learning based optimization", Eng. Struct., 34, 225-232. https://doi.org/10.1016/j.engstruct.2011.08.035.
  52. Topal, U., Trung, V.D., Dede, T. and Nazarimofrad, E. (2018), "Buckling load optimization of laminated plates resting on Pasternak foundation using TLBO", Struct. Eng. Mech., 67(6), 617-628. https://doi.org/10.12989/sem.2018.67.6.617.

피인용 문헌

  1. Performance of Jaya algorithm in optimum design of cold-formed steel frames vol.40, pp.6, 2021, https://doi.org/10.12989/scs.2021.40.6.795