DOI QR코드

DOI QR Code

Numerical and experimental research on actuator forces in toggled active vibration control system (Part I: Numerical)

  • Mirfakhraei, Seyyed Farhad (Department of Civil Engineering, Faculty of Engineering, Seraj University) ;
  • Ahmadi, Hamid Reza (Department of Civil Engineering, Faculty of Engineering, University of Maragheh) ;
  • Chan, Ricky (Department of Civil and Infrastructural Engineering, Faculty of Civil Engineering, RMIT University)
  • 투고 : 2019.02.15
  • 심사 : 2019.11.29
  • 발행 : 2020.02.25

초록

In this research, toggled actuator forces were examined. For achieving to this object, an actuator was installed in a toggle pattern in a S.D.O.F frame and actuator forces were investigated thru a numerical analysis process. Within past twenty years, researchers tried to use strong bracing systems as well as huge dampers to stabilize tall buildings during intensive earthquakes. Eventually, utilizing of active control systems containing actuators to counter massive excitations in structures was emerged. However, the more powerful earthquake excitations, the more robust actuators were required to be installed in the system. Subsequently, the latter process made disadvantage to the active control system due to very high price of the robust actuators as well as their large demands for electricity. Therefore, through a numerical process (Part I), influence of toggled actuator pattern was investigated. The algorithm used in the system was LQR and ATmega328 was selected as a control platform. For comparison, active tendon control system was chosen. The final results show clearly that using the toggle pattern mitigates the required actuator forces enormously leading to deploy much lighter actuators.

키워드

참고문헌

  1. Abe, M. and Fujino, Y. (1994), "Dynamic characterization of multiple tuned mass dampers and some design formulas", Earthq. Eng. Struct. Dyn., 23(8), 813-835. https://doi.org/10.1002/eqe.4290230802
  2. Ahmadi, H.R. and Anvari, D. (2018), "Health monitoring of pedestrian truss bridges using cone-shaped kernel distribution", Smart Struct. Syst., Int. J., 22(6), 699-709. https://doi.org/10.12989/sss.2018.22.6.699
  3. Ahmadi, H.R., Daneshjoo, F. and Khaji, N. (2015), "New damage indices and algorithm based on square time-frequency distribution for damage detection in concrete piers of railroad bridges", Struct. Control Health Monitor., 22(1), 91-106. https://doi.org/10.1002/stc.1662
  4. Ahmadi, H.R., Namdari, N., Cao, M. and Bayat, M. (2019), "Seismic investigation of pushover methods for concrete piers of curved bridges in plan", Comput. Concrete, Int. J., 23(1), 1-10. https://doi.org/10.12989/cac.2019.23.1.001
  5. Amini, F. and Tavassoli, M.R. (2005), "Optimal structural active control force, number and placement of controllers", Eng. Struct., 27(9), 1306-1316. https://doi.org/10.1016/j.engstruct.2005.01.006
  6. Bagha, A.K. and Modak, S.V. (2017), "Feedback control strategies for active control of noise inside a 3-D vibro-acoustic cavity", Smart Struct. Syst., Int. J., 20(3), 273-283. https://doi.org/10.12989/sss.2017.20.3.273
  7. Bayat, M. and Abdollahzadeh, G. (2011), "On the effect of the near field records on the steel braced frames equipped with energy dissipating devices", Latin Am. J. Solids Struct., 8(4), 429-443. http://dx.doi.org/10.1590/S1679-78252011000400004
  8. Bayat, M. and Pakar, I. (2013), "On the approximate analytical solution to non-linear oscillation systems", Shock Vib., 20(1), 43-52. https://doi.org/10.3233/SAV-2012-0726
  9. Bayat, M. and Pakar, I. (2015), "Mathematical solution for nonlinear vibration equations using variational approach", Smart Struct. Syst., Int. J., 15(5), 1311-1327. https://doi.org/10.12989/sss.2015.15.5.1311
  10. Bayat, M., Shahidi, M., Barari, A. and Domairry, G. (2010), "On the approximate analysis of nonlinear behavior of structure under harmonic loading", Int. J. Phys. Sci., 5(7), 1074-1080.
  11. Bayat, M., Daneshjoo, F., Nistico, N. and Pejovic, J. (2017a), "Seismic evaluation of isolated skewed bridges using fragility function methodology", Comput. Concrete, Int. J., 20(4), 419-427. https://doi.org/10.12989/cac.2017.20.4.419
  12. Bayat, M., Pakar, I. and Bayat, M. (2017b), "Nonlinear vibration of multi-body systems with linear and nonlinear springs", Steel Compos. Struct., Int. J., 25(4), 497-503. https://doi.org/10.12989/scs.2017.25.4.497
  13. Bayramoglu, G., Ozgen, A. and Altinok, E. (2014), "Seismic performance evaluation and retrofitting with viscous fluid dampers of an existing bridge in Istanbul", Struct. Eng. Mech., Int. J., 49(4), 463-477. https://doi.org/10.12989/sem.2014.49.4.463
  14. Braz-Cesar, M.T. and Barros, R. (2018), "Semi-active fuzzy based control system for vibration reduction of a sdof structure under seismic excitation", Smart Struct. Syst., Int. J., 21(4), 389-395. https://doi.org/10.12989/sss.2018.21.4.389
  15. Cao, H., Reinhorn, A.M. and Soong, T.T. (1998), "Design of an active mass damper for a tall TV tower in Nanjing, China", Eng. Struct., 20(3), 134-143. https://doi.org/10.1016/S0141-0296(97)00072-2
  16. Cheng, F.Y. (1988), "Response control based on structural optimization and its combination with active protection", Procedings of the World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, August.
  17. Cheng, F.Y. and Jiang, H. (1998a), "Hybrid control of seismic structures with optimal placement of control devices", J. Aerosp. Eng., 11(2), 52-58. https://doi.org/10.1061/(ASCE)0893-1321(1998)11:2(52)
  18. Cheng, F.Y. and Jiang, H. (1998b), "Optimum control of a hybrid system for seismic excitations with state observer technique", Smart Mater. Struct., 7(5), 654. https://doi.org/10.1088/0964-1726/7/5/009
  19. Cheng, F.Y., Jiang, H. and Lou, K. (2008), Smart Structures: Innovative Systems for Seismic Response Control, CRC Press, Boca Raton, FL, USA.
  20. Chopra, A.K. (2017), Dynamics of Structures. Theory and Applications to Earthquake Engineering, Prentice-hall International Series, NY, USA.
  21. Chung, L.L., Reinhorn, A.M. and Soong, T.T. (1988), "Experiments on active control of seismic structures", J. Eng. Mech., 114(2), 241-256. https://doi.org/10.1061/(ASCE)0733-9399(1988)114:2(241)
  22. Chung, L.L., Lin, R.C., Soong, T.T. and Reinhorn, A.M. (1989), "Experimental study of active control for MDOF seismic structures", J. Eng. Mech., 115(8), 1609-1627. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:8(1609)
  23. Constantinou, M.C. and Symans, M.D. (1992), "Experimental and analytical investigation of seismic response of structures with supplemental fluid viscous dampers", National Center for Earthquake Engineering Research, Buffalo, NY, USA.
  24. Constantinou, M.C., Tsopelas, P., Hammel, W. and Sigaher, A.N. (2001), "Toggle-brace-damper seismic energy dissipation systems", J. Struct. Eng., 127(2), 105-112. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(105)
  25. Council, B.S.S. (2000), "Prestandard and commentary for the seismic rehabilitation of buildings", Report FEMA-356, Washington, DC, USA.
  26. De Domenico, D. and Ricciardi, G. (2018), "Earthquake protection of existing structures with limited seismic joint: base isolation with supplemental damping versus rotational inertia", Adv. Civil Eng., 2018. https://doi.org/10.1155/2018/6019495
  27. Dinh, V.N., Basu, B. and Nagarajaiah, S. (2016), "Semi-active control of vibrations of spar type floating offshore wind turbines", Smart Struct. Syst., Int. J., 18(4), 683-705. https://doi.org/10.12989/sss.2016.18.4.683
  28. Dyke, S.J., Spencer Jr, B.F., Belknap, A.E., Ferrell, K.J., Quast, P. and Sain, M.K. (1994a), "Absolute acceleration feedback control strategies for the active mass driver", Proceedings of the 1st World Conference on Structural Control, Pasadena, CA, USA.
  29. Dyke, S.J., Spencer, B.F., Quast, P., Sain, M.K., Kaspari, D.C. and Soong, T.T. (1994b), Experimental Verification of Acceleration Feedback Control Strategies for an Active Tendon System, NCEER, USA.
  30. Dyke, S.J., Spencer Jr, B.F., Quast, P., Kaspari Jr, D.C. and Sain, M.K. (1996a), "Implementation of an active mass driver using acceleration feedback control", Comput.-Aid. Civil Infrastruct. Eng., 11(5), 305-323. https://doi.org/10.1111/j.1467-8667.1996.tb00445.x
  31. Dyke, S.J., Spencer Jr, B.F., Quast, P., Sain, M.K., Kaspari Jr, D.C. and Soong, T.T. (1996b), "Acceleration feedback control of MDOF structures", J. Eng. Mech., 122(9), 907-918. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:9(907)
  32. Fisco, N.R. and Adeli, H. (2011), "Smart structures: part I-active and semi-active control", Scientia Iranica, 18(3), 275-284. https://doi.org/10.1016/j.scient.2011.05.034
  33. Fu, F. (2018), Design and Analysis of Tall and Complex Structures, Butterworth-Heinemann, Oxford, UK.
  34. Gharebaghi, S.A. and Zangooei, E. (2017), "Chaotic particle swarm optimization in optimal active control of shear buildings", Struct. Eng. Mech., Int. J., 61(3), 347-357. https://doi.org/10.12989/sem.2017.61.3.347
  35. He, J., Xu, Y.L., Zhang, C.D. and Zhang, X.H. (2015), "Optimum control system for earthquake-excited building structures with minimal number of actuators and sensors", Smart Struct. Syst., Int. J., 16(6), 981-1002. https://doi.org/10.12989/sss.2015.16.6.981
  36. Hejazi, F., Shoaei, M.D., Tousi, A. and Jaafar, M.S. (2016), "Analytical model for viscous wall dampers", Comput.-Aid. Civil Infrastruct. Eng., 31(5), 381-399. https://doi.org/10.1111/mice.12161
  37. Housner, G., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Skelton, R.E., Soong, T.T., Spencer, B.F. and Yao, J.T. (1997), "Structural control: past, present, and future", J. Eng. Mech., 123(9), 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)
  38. Hwang, J.S., Huang, Y.N., Hung, Y.H. and Huang, J.C. (2004), "Applicability of seismic protective systems to structures with vibration-sensitive equipment", J. Struct. Eng., 130(11), 1676-1684. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1676)
  39. Hwang, J.S., Huang, Y.N. and Hung, Y.H. (2005), "Analytical and experimental study of toggle-brace-damper systems", J. Struct. Eng., 131(7), 1035-1043. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:7(1035)
  40. Ikeda, Y., Sasaki, K., Sakamoto, M. and Kobori, T. (2001), "Active mass driver system as the first application of active structural control", Earthq. Eng. Struct. Dyn., 30(11), 1575-1595. https://doi.org/10.1002/eqe.82
  41. Jamnani, H.H., Abdollahzadeh, G. and Faghihmaleki, H. (2017), "Seismic fragility analysis of improved RC frames using different types of bracing", J. Eng. Sci. Technol., 12(4), 913-934.
  42. Jamnani, H.H., Amiri, J.V. and Rajabnejad, H. (2018), "Energy distribution in RC shear wall-frame structures subject to repeated earthquakes", Soil Dyn. Earthq. Eng., 107, 116-128. https://doi.org/10.1016/j.soildyn.2018.01.010
  43. Kareem, A., Kijewski, T. and Tamura, Y. (1999), "Mitigation of motions of tall buildings with specific examples of recent applications", Wind Struct., Int. J., 2(3), 201-251. https://doi.org/10.12989/was.1999.2.3.201
  44. Liu, D.K., Yang, Y.L. and Li, Q.S. (2003), "Optimum positioning of actuators in tall buildings using genetic algorithm", Comput. Struct., 81(32), 2823-2827. https://doi.org/10.1016/j.compstruc.2003.07.002
  45. Lu, Z., Li, J. and Jia, C. (2018), "Studies on energy dissipation mechanism of an innovative viscous damper filled with oil and silt", Sustainability, 10(6), 1-13. https://doi.org/10.3390/su10061777
  46. Mahdavi, N., Ahmadi, H.R. and Mahdavi, H. (2012), "A comparative study on conventional push-over analysis method and incremental dynamic analysis (IDA) approach", Scientif. Res. Essays, 7(7), 751-773.
  47. Majeed, A.P.A. Taha, Z. Abdullah, M.A., Azmi, K.Z.M. and Zakaria, M.A. (2018), "The control of an upper extremity exoskeleton for stroke rehabilitation: An active force control scheme approach", Adv. Robot. Res., Int. J., 2(3), 237-245. https://doi.org/10.12989/arr.2018.2.3.237
  48. Miah, M.S., Chatzi, E.N. and Weber, F. (2015), "Semi-active control for vibration mitigation of structural systems incorporating uncertainties", Smart Mater. Struct., 24(5), 055016. https://doi.org/10.1088/0964-1726/24/5/055016
  49. Muthalif, A.G., Kasemi, H.B., Nordin, N.H., Rashid, M.M. and Razali, M.K.M. (2017), "Semi-active vibration control using experimental model of magnetorheological damper with adaptive F-PID controller", Smart Struct. Syst., Int. J., 20(1), 85-97. https://doi.org/10.12989/sss.2017.20.1.085
  50. Pakar, I., Bayat, M. and Cveticanin, L. (2018), "Nonlinear vibration of unsymmetrical laminated composite beam on elastic foundation", Steel Compos. Struct., Int. J., 26(4), 453-461. https://doi.org/10.12989/scs.2018.26.4.453
  51. Pantelides, C.P. and Cheng, F.Y. (1990), "Optimal placement of controllers for seismic structures", Eng. Struct., 12(4), 254-262. https://doi.org/10.1016/0141-0296(90)90024-M
  52. Park, W., Park, K.S., Koh, H.M. and Ha, D.H. (2006), "Windinduced response control and serviceability improvement of an air traffic control tower", Eng. Struct., 28(7), 1060-1070. https://doi.org/10.1016/j.engstruct.2005.11.013
  53. Park, W., Park, K.S. and Koh, H.M. (2008), "Active control of large structures using a bilinear pole-shifting transform with $H{\infty}$ control method", Eng. Struct., 30(11), 3336-3344. https://doi.org/10.1016/j.engstruct.2008.05.009
  54. Rao, A.R.M. and Sivasubramanian, K. (2008), "Optimal placement of actuators for active vibration control of seismic excited tall buildings using a multiple start guided neighbourhood search (MSGNS) algorithm", J. Sound Vib., 311(1-2), 133-159. https://doi.org/10.1016/j.jsv.2007.08.031
  55. Ras, A. and Boumechra, N. (2016), "Seismic energy dissipation study of linear fluid viscous dampers in steel structure design", Alexandria Eng. J., 55(3), 2821-2832. https://doi.org/10.1016/j.aej.2016.07.012
  56. Reinhorn, A.M., Viti, S. and Cimellaro, G. (2005), "Retrofit of structures: Strength reduction with damping enhancement", Proceedings of the 37th UJNR Panel Meeting on Wind and Seismic Effects.
  57. Ricciardelli, F., Pizzimenti, A.D. and Mattei, M. (2003), "Passive and active mass damper control of the response of tall buildings to wind gustiness", Eng. Struct., 25(9), 1199-1209. https://doi.org/10.1016/S0141-0296(03)00068-3
  58. Sigaher, A.N. and Constantinou, M.C. (2003), "Scissor-jackdamper energy dissipation system", Earthq. Spectra, 19(1), 133-158. https://doi.org/10.1193/1.1540999
  59. Soong, T.T. (1988), "State-of-the-art review: active structural control in civil engineering", Eng. Struct., 10(2), 74-84. https://doi.org/10.1016/0141-0296(88)90033-8
  60. Soong, T.T. and Dargush, G.F. (1997), Passive Energy Dissipation Systems in Structural Engineering, John Wiley & Sons.
  61. Soong, T.T. and Spencer Jr, B.F. (2002), "Supplemental energy dissipation: state-of-the-art and state-of-the-practice", Eng. Struct., 24(3), 243-259. https://doi.org/10.1016/S0141-0296(01)00092-X
  62. Spencer Jr, B.F. and Nagarajaiah, S. (2003), "State of the art of structural control", J. Struct. Eng., 129(7), 845-856. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(845)
  63. Spencer, B.F. and Sain, M.K. (1997), "Controlling buildings: a new frontier in feedback", IEEE Control Syst. Maz., 17(6), 19-35. https://doi.org/10.1109/37.642972
  64. Spencer, B.F., Dyke, S.J., Sain, M.K. and Quast, P. (1993), "Acceleration feedback control strategies for a seismic protection", Proceedings of American Control Conference, San Francisco, CA, USA, June. https://doi.org/10.23919/ACC.1993.4793085
  65. Taylor, D.P. (1999a), U.S. Patent No. 5,870,863. Washington, DC: U.S. Patent and Trademark Office.
  66. Taylor, D.P. (1999b), U.S. Patent No. 5,934,028. Washington, DC: U.S. Patent and Trademark Office.
  67. Tian, Z., Mokrani, B., Alaluf, D., Jiang, J. and Preumont, A. (2017), "Active tendon control of suspension bridges: Study on the active cables configuration", Smart Struct. Syst., Int. J., 19(5), 463-472. https://doi.org/10.12989/sss.2017.19.5.463
  68. Wu, B., Ou, J.P. and Soong, T.T. (1997), "Optimal placement of energy dissipation devices for three-dimensional structures", Eng. Struct., 19(2), 113-125. https://doi.org/10.1016/S0141-0296(96)00034-X
  69. Xu, Y.L. and Teng, J. (2002), "Optimum design of active/passive control devices for tall buildings under earthquake excitation", Struct. Des. Tall Build., 11(2), 109-127. https://doi.org/10.1002/tal.193
  70. Xu, H.B., Zhang, C.W., Li, H., Tan, P., Ou, J.P. and Zhou, F.L. (2014), "Active mass driver control system for suppressing wind-induced vibration of the Canton Tower", Smart Struct. Syst., Int. J., 13(2), 281-303. https://doi.org/10.12989/sss.2014.13.2.281
  71. Yamamoto, M., Aizawa, S., Higashino, M. and Toyama, K. (2001), "Practical applications of active mass dampers with hydraulic actuator", Earthq. Eng. Struct. Dyn., 30(11), 1697-1717. https://doi.org/10.1002/eqe.88
  72. Yamazaki, S., Nagata, N. and Abiru, H. (1992), "Tuned active dampers installed in the Minato Mirai (MM) 21 Landmark Tower in Yokohama", J. Wind Eng. Ind. Aerodyn., 43(1-3), 1937-1948. https://doi.org/10.1016/0167-6105(92)90618-K
  73. Yang, J.N. and Soong, T.T. (1988), "Recent advances in active control of civil engineering structures", Probabil. Eng. Mech., 3(4), 179-188. https://doi.org/10.1016/0266-8920(88)90010-0
  74. Zhan, M., Wang, S., Yang, T., Liu, Y. and Yu, B. (2017), "Optimum design and vibration control of a space structure with the hybrid semi-active control devices", Smart Struct. Syst., Int. J., 19(4), 341-350. https://doi.org/10.12989/sss.2017.19.4.341